Embedded_SDK
/
MCUXpresso_MIMXRT1052xxxxB
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
MCUXpresso_MIMXRT1052xxxxB/boards/evkbimxrt1050/freertos_examples/freertos_swtimer
History
Yilin Sun 6baf4427ce
Updated to v2.15.000 
Signed-off-by: Yilin Sun <imi415@imi.moe>
 		2024-03-18 23:15:10 +08:00
..
armgcc Updated to v2.15.000 2024-03-18 23:15:10 +08:00
FreeRTOSConfig.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
board.c Updated to v2.15.000 2024-03-18 23:15:10 +08:00
board.h Updated to v2.15.000 2024-03-18 23:15:10 +08:00
clock_config.c Updated to v2.14.0 2023-11-30 20:55:00 +08:00
clock_config.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
dcd.c Updated to v2.14.0 2023-11-30 20:55:00 +08:00
dcd.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
evkbimxrt1050_sdram_init.jlinkscript Updated to v2.14.0 2023-11-30 20:55:00 +08:00
freertos_swtimer.c Updated to v2.14.0 2023-11-30 20:55:00 +08:00
freertos_swtimer_v3_14.xml Updated to v2.15.000 2024-03-18 23:15:10 +08:00
pin_mux.c Updated to v2.14.0 2023-11-30 20:55:00 +08:00
pin_mux.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
readme.md Updated to v2.15.000 2024-03-18 23:15:10 +08:00

readme.md

Overview

This document explains the freertos_swtimer example. It shows usage of software timer and its callback.

The example application creates one software timer SwTimer. The timer’s callback SwTimerCallback is periodically executed and text “Tick.” is printed to terminal.

SDK version

  • Version: 2.15.000

Toolchain supported

  • IAR embedded Workbench 9.40.1
  • GCC ARM Embedded 12.2
  • Keil MDK 5.38.1
  • MCUXpresso 11.8.0

Hardware requirements

  • Mini/micro USB cable
  • EVKB-IMXRT1050 board
  • Personal Computer

Board settings

No special settings are required.

Prepare the Demo

  1. Connect a USB cable between the host PC and the OpenSDA USB port on the target board.
  2. Open a serial terminal with the following settings:
    • 115200 baud rate
    • 8 data bits
    • No parity
    • One stop bit
    • No flow control
  3. Download the program to the target board.
  4. Either press the reset button on your board or launch the debugger in your IDE to begin running the demo. Running the demo ================ After the board is flashed the Tera Term will show output message.

Example output: Tick. Tick. Tick.