656 lines
42 KiB
C
656 lines
42 KiB
C
/*
|
|
* Copyright 2017-2021 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
/***********************************************************************************************************************
|
|
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
|
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
|
**********************************************************************************************************************/
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
!!GlobalInfo
|
|
product: Pins v9.0
|
|
processor: MIMXRT1052xxxxB
|
|
package_id: MIMXRT1052DVL6B
|
|
mcu_data: ksdk2_0
|
|
processor_version: 0.0.0
|
|
board: IMXRT1050-EVKB
|
|
pin_labels:
|
|
- {pin_num: E3, pin_signal: GPIO_EMC_00, label: SEMC_D0, identifier: SEMC_D0}
|
|
- {pin_num: F3, pin_signal: GPIO_EMC_01, label: SEMC_D1, identifier: SEMC_D1}
|
|
- {pin_num: F4, pin_signal: GPIO_EMC_02, label: SEMC_D2, identifier: SEMC_D2}
|
|
- {pin_num: F2, pin_signal: GPIO_EMC_04, label: SEMC_D4, identifier: SEMC_D4}
|
|
- {pin_num: G4, pin_signal: GPIO_EMC_03, label: SEMC_D3, identifier: SEMC_D3}
|
|
- {pin_num: G5, pin_signal: GPIO_EMC_05, label: SEMC_D5, identifier: SEMC_D5}
|
|
- {pin_num: H5, pin_signal: GPIO_EMC_06, label: SEMC_D6, identifier: SEMC_D6}
|
|
- {pin_num: H4, pin_signal: GPIO_EMC_07, label: SEMC_D7, identifier: SEMC_D7}
|
|
- {pin_num: H3, pin_signal: GPIO_EMC_08, label: SEMC_DM0, identifier: SEMC_DM0}
|
|
- {pin_num: C2, pin_signal: GPIO_EMC_09, label: SEMC_A0, identifier: SEMC_A0}
|
|
- {pin_num: G1, pin_signal: GPIO_EMC_10, label: SEMC_A1, identifier: SEMC_A1}
|
|
- {pin_num: G3, pin_signal: GPIO_EMC_11, label: SEMC_A2, identifier: SEMC_A2}
|
|
- {pin_num: H1, pin_signal: GPIO_EMC_12, label: SEMC_A3, identifier: SEMC_A3}
|
|
- {pin_num: A6, pin_signal: GPIO_EMC_13, label: SEMC_A4, identifier: SEMC_A4}
|
|
- {pin_num: B6, pin_signal: GPIO_EMC_14, label: SEMC_A5, identifier: SEMC_A5}
|
|
- {pin_num: B1, pin_signal: GPIO_EMC_15, label: SEMC_A6, identifier: SEMC_A6}
|
|
- {pin_num: A5, pin_signal: GPIO_EMC_16, label: SEMC_A7, identifier: SEMC_A7}
|
|
- {pin_num: A4, pin_signal: GPIO_EMC_17, label: SEMC_A8, identifier: SEMC_A8}
|
|
- {pin_num: B2, pin_signal: GPIO_EMC_18, label: SEMC_A9, identifier: SEMC_A9}
|
|
- {pin_num: B4, pin_signal: GPIO_EMC_19, label: SEMC_A11, identifier: SEMC_A11}
|
|
- {pin_num: G2, pin_signal: GPIO_EMC_23, label: SEMC_A10, identifier: SEMC_A10}
|
|
- {pin_num: A3, pin_signal: GPIO_EMC_20, label: SEMC_A12, identifier: SEMC_A12}
|
|
- {pin_num: C1, pin_signal: GPIO_EMC_21, label: SEMC_BA0, identifier: SEMC_BA0}
|
|
- {pin_num: F1, pin_signal: GPIO_EMC_22, label: SEMC_BA1, identifier: SEMC_BA1}
|
|
- {pin_num: D3, pin_signal: GPIO_EMC_24, label: SEMC_CAS, identifier: SEMC_CAS}
|
|
- {pin_num: D2, pin_signal: GPIO_EMC_25, label: SEMC_RAS, identifier: SEMC_RAS}
|
|
- {pin_num: B3, pin_signal: GPIO_EMC_26, label: SEMC_CLK, identifier: SEMC_CLK}
|
|
- {pin_num: A2, pin_signal: GPIO_EMC_27, label: SEMC_CKE, identifier: SEMC_CKE}
|
|
- {pin_num: D1, pin_signal: GPIO_EMC_28, label: SEMC_WE, identifier: SEMC_WE}
|
|
- {pin_num: E1, pin_signal: GPIO_EMC_29, label: SEMC_CS0, identifier: SEMC_CS0}
|
|
- {pin_num: C6, pin_signal: GPIO_EMC_30, label: SEMC_D8, identifier: SEMC_D8}
|
|
- {pin_num: C5, pin_signal: GPIO_EMC_31, label: SEMC_D9, identifier: SEMC_D9}
|
|
- {pin_num: D5, pin_signal: GPIO_EMC_32, label: SEMC_D10, identifier: SEMC_D10}
|
|
- {pin_num: C4, pin_signal: GPIO_EMC_33, label: SEMC_D11, identifier: SEMC_D11}
|
|
- {pin_num: D4, pin_signal: GPIO_EMC_34, label: SEMC_D12, identifier: SEMC_D12}
|
|
- {pin_num: E5, pin_signal: GPIO_EMC_35, label: SEMC_D13, identifier: SEMC_D13}
|
|
- {pin_num: C3, pin_signal: GPIO_EMC_36, label: SEMC_D14, identifier: SEMC_D14}
|
|
- {pin_num: E4, pin_signal: GPIO_EMC_37, label: SEMC_D15, identifier: SEMC_D15}
|
|
- {pin_num: D6, pin_signal: GPIO_EMC_38, label: SEMC_DM1, identifier: SEMC_DM1}
|
|
- {pin_num: B7, pin_signal: GPIO_EMC_39, label: SEMC_DQS, identifier: SEMC_DQS}
|
|
- {pin_num: A7, pin_signal: GPIO_EMC_40, label: ENET_MDC, identifier: ENET_MDC}
|
|
- {pin_num: C7, pin_signal: GPIO_EMC_41, label: ENET_MDIO, identifier: ENET_MDIO}
|
|
- {pin_num: D7, pin_signal: GPIO_B0_00, label: LCDIF_CLK, identifier: LCDIF_CLK}
|
|
- {pin_num: E7, pin_signal: GPIO_B0_01, label: LCDIF_ENABLE, identifier: LCDIF_ENABLE}
|
|
- {pin_num: E8, pin_signal: GPIO_B0_02, label: LCDIF_HSYNC, identifier: LCDIF_HSYNC}
|
|
- {pin_num: D8, pin_signal: GPIO_B0_03, label: LCDIF_VSYNC, identifier: LCDIF_VSYNC}
|
|
- {pin_num: C8, pin_signal: GPIO_B0_04, label: 'LCDIF_D0/BT_CFG[0]', identifier: LCDIF_D0}
|
|
- {pin_num: B8, pin_signal: GPIO_B0_05, label: 'LCDIF_D1/BT_CFG[1]', identifier: LCDIF_D1}
|
|
- {pin_num: A8, pin_signal: GPIO_B0_06, label: 'LCDIF_D2/BT_CFG[2]', identifier: LCDIF_D2}
|
|
- {pin_num: A9, pin_signal: GPIO_B0_07, label: 'LCDIF_D3/BT_CFG[3]', identifier: LCDIF_D3}
|
|
- {pin_num: B9, pin_signal: GPIO_B0_08, label: 'LCDIF_D4/BT_CFG[4]', identifier: LCDIF_D4}
|
|
- {pin_num: C9, pin_signal: GPIO_B0_09, label: 'LCDIF_D5/BT_CFG[5]', identifier: LCDIF_D5}
|
|
- {pin_num: D9, pin_signal: GPIO_B0_10, label: 'LCDIF_D6/BT_CFG[6]', identifier: LCDIF_D6}
|
|
- {pin_num: A10, pin_signal: GPIO_B0_11, label: 'LCDIF_D7/BT_CFG[7]', identifier: LCDIF_D7}
|
|
- {pin_num: C10, pin_signal: GPIO_B0_12, label: 'LCDIF_D8/BT_CFG[8]', identifier: LCDIF_D8}
|
|
- {pin_num: D10, pin_signal: GPIO_B0_13, label: 'LCDIF_D9/BT_CFG[9]', identifier: LCDIF_D9}
|
|
- {pin_num: E10, pin_signal: GPIO_B0_14, label: 'LCDIF_D10/BT_CFG[10]', identifier: LCDIF_D10}
|
|
- {pin_num: E11, pin_signal: GPIO_B0_15, label: 'LCDIF_D11/BT_CFG[11]', identifier: LCDIF_D11}
|
|
- {pin_num: A11, pin_signal: GPIO_B1_00, label: LCDIF_D12, identifier: LCDIF_D12}
|
|
- {pin_num: B11, pin_signal: GPIO_B1_01, label: LCDIF_D13, identifier: LCDIF_D13}
|
|
- {pin_num: C11, pin_signal: GPIO_B1_02, label: LCDIF_D14, identifier: LCDIF_D14}
|
|
- {pin_num: D11, pin_signal: GPIO_B1_03, label: LCDIF_D15, identifier: LCDIF_D15}
|
|
- {pin_num: E12, pin_signal: GPIO_B1_04, label: ENET_RXD0, identifier: ENET_RXD0}
|
|
- {pin_num: D12, pin_signal: GPIO_B1_05, label: ENET_RXD1, identifier: ENET_RXD1}
|
|
- {pin_num: C12, pin_signal: GPIO_B1_06, label: ENET_CRS_DV, identifier: ENET_CRS_DV}
|
|
- {pin_num: B12, pin_signal: GPIO_B1_07, label: ENET_TXD0, identifier: ENET_TXD0}
|
|
- {pin_num: A12, pin_signal: GPIO_B1_08, label: ENET_TXD1, identifier: ENET_TXD1}
|
|
- {pin_num: A13, pin_signal: GPIO_B1_09, label: ENET_TXEN, identifier: ENET_TXEN}
|
|
- {pin_num: B13, pin_signal: GPIO_B1_10, label: ENET_TX_CLK, identifier: ENET_TX_CLK}
|
|
- {pin_num: C13, pin_signal: GPIO_B1_11, label: ENET_RXER, identifier: ENET_RXER}
|
|
- {pin_num: D13, pin_signal: GPIO_B1_12, label: SD_CD_SW, identifier: SD_CD_SW}
|
|
- {pin_num: D14, pin_signal: GPIO_B1_13, label: WDOG_B, identifier: WDOG_B}
|
|
- {pin_num: C14, pin_signal: GPIO_B1_14, label: SD0_VSELECT, identifier: SD0_VSELECT}
|
|
- {pin_num: B14, pin_signal: GPIO_B1_15, label: USB_HOST_PWR/BACKLIGHT_CTL, identifier: BACKLIGHT_CTL}
|
|
- {pin_num: E9, pin_signal: NVCC_GPIO0, label: DCDC_3V3/NVCC_GPIO_3V3}
|
|
- {pin_num: F10, pin_signal: NVCC_GPIO1, label: DCDC_3V3/NVCC_GPIO_3V3}
|
|
- {pin_num: J10, pin_signal: NVCC_GPIO2, label: DCDC_3V3/NVCC_GPIO_3V3}
|
|
- {pin_num: M14, pin_signal: GPIO_AD_B0_00, label: 'USB_HOST_OC/J24[10]'}
|
|
- {pin_num: H10, pin_signal: GPIO_AD_B0_01, label: 'USB_OTG1_ID/J24[9]'}
|
|
- {pin_num: M11, pin_signal: GPIO_AD_B0_02, label: 'USB_OTG1_PWR/J24[2]'}
|
|
- {pin_num: G11, pin_signal: GPIO_AD_B0_03, label: 'USB_OTG1_OC/J24[1]'}
|
|
- {pin_num: F11, pin_signal: GPIO_AD_B0_04, label: 'CSI_PWDN/J35[17]/BOOT_MODE[0]', identifier: CSI_PWDN}
|
|
- {pin_num: G14, pin_signal: GPIO_AD_B0_05, label: 'CAN_STBY/BOOT_MODE[1]/Flash_RST/U12[8]', identifier: CAN_STBY}
|
|
- {pin_num: E14, pin_signal: GPIO_AD_B0_06, label: 'JTAG_TMS/J21[7]/SWD_DIO'}
|
|
- {pin_num: F12, pin_signal: GPIO_AD_B0_07, label: 'JTAG_TCK/J21[9]/SWD_CLK'}
|
|
- {pin_num: F13, pin_signal: GPIO_AD_B0_08, label: JTAG_MOD}
|
|
- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]'}
|
|
- {pin_num: G13, pin_signal: GPIO_AD_B0_10, label: 'JTAG_TDO/J21[13]/INT1_COMBO/ENET_INT/J22[6]/U32[11]', identifier: INT1_COMBO}
|
|
- {pin_num: G10, pin_signal: GPIO_AD_B0_11, label: 'JTAG_nTRST/J21[3]/INT2_COMBO/LCD_TOUCH_INT/J22[3]/U32[9]', identifier: INT2_COMBO}
|
|
- {pin_num: K14, pin_signal: GPIO_AD_B0_12, label: UART1_TXD, identifier: UART1_TXD}
|
|
- {pin_num: L14, pin_signal: GPIO_AD_B0_13, label: UART1_RXD, identifier: UART1_RXD}
|
|
- {pin_num: H14, pin_signal: GPIO_AD_B0_14, label: 'CAN2_TX/U12[1]', identifier: CAN2_TX}
|
|
- {pin_num: L10, pin_signal: GPIO_AD_B0_15, label: 'CAN2_RX/U12[4]', identifier: CAN2_RX}
|
|
- {pin_num: J11, pin_signal: GPIO_AD_B1_00, label: 'I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4]', identifier: I2C_SCL_FXOS8700CQ;CSI_I2C_SCL}
|
|
- {pin_num: K11, pin_signal: GPIO_AD_B1_01, label: 'I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6]', identifier: I2C_SDA_FXOS8700CQ;CSI_I2C_SDA}
|
|
- {pin_num: L11, pin_signal: GPIO_AD_B1_02, label: 'SPDIF_OUT/J22[7]', identifier: SPDIF_OUT}
|
|
- {pin_num: M12, pin_signal: GPIO_AD_B1_03, label: 'SPDIF_IN/J22[8]', identifier: SPDIF_IN}
|
|
- {pin_num: H13, pin_signal: GPIO_AD_B1_08, label: 'AUD_INT/CSI_D9//J35[13]/J22[4]', identifier: CSI_D9}
|
|
- {pin_num: M13, pin_signal: GPIO_AD_B1_09, label: 'SAI1_MCLK/CSI_D8/J35[11]', identifier: CSI_D8}
|
|
- {pin_num: L13, pin_signal: GPIO_AD_B1_10, label: 'SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1]', identifier: CSI_D7}
|
|
- {pin_num: J13, pin_signal: GPIO_AD_B1_11, label: 'SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2]', identifier: CSI_D6}
|
|
- {pin_num: H12, pin_signal: GPIO_AD_B1_12, label: 'SAI1_RXD/CSI_D5/J35[5]/U13[16]', identifier: CSI_D5}
|
|
- {pin_num: H11, pin_signal: GPIO_AD_B1_13, label: 'SAI1_TXD/CSI_D4/J35[3]/U13[14]', identifier: CSI_D4}
|
|
- {pin_num: G12, pin_signal: GPIO_AD_B1_14, label: 'SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12]', identifier: CSI_D3}
|
|
- {pin_num: J14, pin_signal: GPIO_AD_B1_15, label: 'SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13]', identifier: CSI_D2}
|
|
- {pin_num: J4, pin_signal: GPIO_SD_B0_00, label: 'SD1_CMD/J24[6]', identifier: SD1_CMD}
|
|
- {pin_num: J3, pin_signal: GPIO_SD_B0_01, label: 'SD1_CLK/J24[3]', identifier: SD1_CLK}
|
|
- {pin_num: J1, pin_signal: GPIO_SD_B0_02, label: 'SD1_D0/J24[4]/SPI_MOSI/PWM', identifier: SD1_D0}
|
|
- {pin_num: K1, pin_signal: GPIO_SD_B0_03, label: 'SD1_D1/J24[5]/SPI_MISO', identifier: SD1_D1}
|
|
- {pin_num: H2, pin_signal: GPIO_SD_B0_04, label: SD1_D2, identifier: SD1_D2}
|
|
- {pin_num: J2, pin_signal: GPIO_SD_B0_05, label: SD1_D3, identifier: SD1_D3}
|
|
- {pin_num: L5, pin_signal: GPIO_SD_B1_00, label: FlexSPI_D3_B, identifier: FlexSPI_D3_B}
|
|
- {pin_num: M5, pin_signal: GPIO_SD_B1_01, label: FlexSPI_D2_B, identifier: FlexSPI_D2_B}
|
|
- {pin_num: M3, pin_signal: GPIO_SD_B1_02, label: FlexSPI_D1_B, identifier: FlexSPI_D1_B}
|
|
- {pin_num: M4, pin_signal: GPIO_SD_B1_03, label: FlexSPI_D0_B, identifier: FlexSPI_D0_B}
|
|
- {pin_num: P2, pin_signal: GPIO_SD_B1_04, label: FlexSPI_CLK_B, identifier: FlexSPI_CLK_B}
|
|
- {pin_num: N3, pin_signal: GPIO_SD_B1_05, label: FlexSPI_DQS, identifier: FlexSPI_DQS}
|
|
- {pin_num: L3, pin_signal: GPIO_SD_B1_06, label: FlexSPI_SS0, identifier: FlexSPI_SS0}
|
|
- {pin_num: L4, pin_signal: GPIO_SD_B1_07, label: FlexSPI_CLK, identifier: FlexSPI_CLK}
|
|
- {pin_num: P3, pin_signal: GPIO_SD_B1_08, label: FlexSPI_D0_A, identifier: FlexSPI_D0_A}
|
|
- {pin_num: N4, pin_signal: GPIO_SD_B1_09, label: FlexSPI_D1_A, identifier: FlexSPI_D1_A}
|
|
- {pin_num: P4, pin_signal: GPIO_SD_B1_10, label: FlexSPI_D2_A, identifier: FlexSPI_D2_A}
|
|
- {pin_num: P5, pin_signal: GPIO_SD_B1_11, label: FlexSPI_D3_A, identifier: FlexSPI_D3_A}
|
|
- {pin_num: M8, pin_signal: USB_OTG1_DN, label: OTG1_DN, identifier: OTG1_DN}
|
|
- {pin_num: L8, pin_signal: USB_OTG1_DP, label: OTG1_DP, identifier: OTG1_DP}
|
|
- {pin_num: N7, pin_signal: USB_OTG2_DN, label: OTG2_DN, identifier: OTG2_DN}
|
|
- {pin_num: P7, pin_signal: USB_OTG2_DP, label: OTG2_DP, identifier: OTG2_DP}
|
|
- {pin_num: K8, pin_signal: VDD_USB_CAP, label: VDD_USB_3V}
|
|
- {pin_num: N6, pin_signal: USB_OTG1_VBUS, label: 5V_USB_OTG}
|
|
- {pin_num: P6, pin_signal: USB_OTG2_VBUS, label: 5V_USB_HS}
|
|
- {pin_num: L12, pin_signal: GPIO_AD_B1_04, label: 'CSI_PIXCLK/J35[8]/J23[3]', identifier: CSI_PIXCLK}
|
|
- {pin_num: K12, pin_signal: GPIO_AD_B1_05, label: 'CSI_MCLK/J35[12]/J23[4]', identifier: CSI_MCLK}
|
|
- {pin_num: J12, pin_signal: GPIO_AD_B1_06, label: 'CSI_VSYNC/J35[18]/J22[2]/UART_TX', identifier: CSI_VSYNC}
|
|
- {pin_num: K10, pin_signal: GPIO_AD_B1_07, label: 'CSI_HSYNC/J35[16]/J22[1]/UART_RX', identifier: CSI_HSYNC}
|
|
- {pin_num: M7, pin_signal: POR_B, label: 'RST_TGTMCU_B/POR_B/J21[15]', identifier: RST_TGTMCU_B;POR_B}
|
|
- {pin_num: N14, pin_signal: VDDA_ADC_3P3, label: VDDA_ADC_3P3_MCU}
|
|
- {pin_num: P12, pin_signal: VDD_HIGH_IN, label: VDD_HIGH_IN_MCU}
|
|
- {pin_num: M9, pin_signal: VDD_SNVS_IN, label: VDD_SNVS_IN}
|
|
- {pin_num: F6, pin_signal: VDD_SOC_IN0, label: VDD_SOC_IN}
|
|
- {pin_num: H6, pin_signal: VDD_SOC_IN2, label: VDD_SOC_IN}
|
|
- {pin_num: G6, pin_signal: VDD_SOC_IN1, label: VDD_SOC_IN}
|
|
- {pin_num: F7, pin_signal: VDD_SOC_IN3, label: VDD_SOC_IN}
|
|
- {pin_num: F8, pin_signal: VDD_SOC_IN4, label: VDD_SOC_IN}
|
|
- {pin_num: F9, pin_signal: VDD_SOC_IN5, label: VDD_SOC_IN}
|
|
- {pin_num: G9, pin_signal: VDD_SOC_IN6, label: VDD_SOC_IN}
|
|
- {pin_num: H9, pin_signal: VDD_SOC_IN7, label: VDD_SOC_IN}
|
|
- {pin_num: J9, pin_signal: VDD_SOC_IN8, label: VDD_SOC_IN}
|
|
- {pin_num: P1, pin_signal: VSS1, label: GND}
|
|
- {pin_num: E2, pin_signal: VSS2, label: GND}
|
|
- {pin_num: K2, pin_signal: VSS3, label: GND}
|
|
- {pin_num: B5, pin_signal: VSS4, label: GND}
|
|
- {pin_num: N5, pin_signal: VSS5, label: GND}
|
|
- {pin_num: G7, pin_signal: VSS6, label: GND}
|
|
- {pin_num: H7, pin_signal: VSS7, label: GND}
|
|
- {pin_num: J7, pin_signal: VSS8, label: GND}
|
|
- {pin_num: G8, pin_signal: VSS9, label: GND}
|
|
- {pin_num: H8, pin_signal: VSS10, label: GND}
|
|
- {pin_num: J8, pin_signal: VSS11, label: GND}
|
|
- {pin_num: N8, pin_signal: VSS12, label: GND}
|
|
- {pin_num: L9, pin_signal: VSS13, label: GND}
|
|
- {pin_num: B10, pin_signal: VSS14, label: GND}
|
|
- {pin_num: E13, pin_signal: VSS15, label: GND}
|
|
- {pin_num: K13, pin_signal: VSS16, label: GND}
|
|
- {pin_num: A14, pin_signal: VSS17, label: GND}
|
|
- {pin_num: P14, pin_signal: VSS18, label: GND}
|
|
- {pin_num: A1, pin_signal: VSS0, label: GND}
|
|
- {pin_num: J6, pin_signal: NVCC_SD0, label: NVCC_SD, identifier: NVCC_SD}
|
|
- {pin_num: K5, pin_signal: NVCC_SD1, label: FLASH_VCC, identifier: FLASH_VCC}
|
|
- {pin_num: F5, pin_signal: NVCC_EMC0, label: DCDC_3V3}
|
|
- {pin_num: E6, pin_signal: NVCC_EMC1, label: DCDC_3V3}
|
|
- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: SD_PWREN}
|
|
- {pin_num: L1, pin_signal: DCDC_IN0, label: MCU_DCDC_IN_3V3}
|
|
- {pin_num: L2, pin_signal: DCDC_IN1, label: MCU_DCDC_IN_3V3}
|
|
- {pin_num: K4, pin_signal: DCDC_IN_Q, label: MCU_DCDC_IN_3V3}
|
|
- {pin_num: M1, pin_signal: DCDC_LP0, label: VDD_SOC_IN}
|
|
- {pin_num: M2, pin_signal: DCDC_LP1, label: VDD_SOC_IN}
|
|
- {pin_num: P11, pin_signal: XTALI, label: XTALI, identifier: XTALI}
|
|
- {pin_num: N11, pin_signal: XTALO, label: XTALO, identifier: XTALO}
|
|
- {pin_num: N9, pin_signal: RTC_XTALI, label: RTC_XTALI, identifier: RTC_XTALI}
|
|
- {pin_num: P9, pin_signal: RTC_XTALO, label: RTC_XTALO, identifier: RTC_XTALO}
|
|
- {pin_num: N1, pin_signal: DCDC_GND0, label: GND}
|
|
- {pin_num: N2, pin_signal: DCDC_GND1, label: GND}
|
|
- {pin_num: J5, pin_signal: DCDC_SENSE, label: VDD_SOC_IN}
|
|
- {pin_num: K3, pin_signal: DCDC_PSWITCH, label: MCU_DCDC_IN_3V3}
|
|
- {pin_num: K7, pin_signal: PMIC_ON_REQ, label: PMIC_ON_REQ, identifier: PMIC_ON_REQ}
|
|
- {pin_num: L7, pin_signal: PMIC_STBY_REQ, label: PERI_PWREN, identifier: PERI_PWREN}
|
|
- {pin_num: M6, pin_signal: ONOFF, label: ONOFF, identifier: ONOFF}
|
|
- {pin_num: K6, pin_signal: TEST_MODE, label: GND}
|
|
- {pin_num: P10, pin_signal: NVCC_PLL, label: VDDA_1P1_CAP}
|
|
- {pin_num: P8, pin_signal: VDD_HIGH_CAP, label: VDDA_2P5_CAP}
|
|
- {pin_num: K9, pin_signal: NGND_KEL0, label: GND}
|
|
- {pin_num: M10, pin_signal: VDD_SNVS_CAP, label: GND}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
#include "fsl_common.h"
|
|
#include "fsl_iomuxc.h"
|
|
#include "pin_mux.h"
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitBootPins
|
|
* Description : Calls initialization functions.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitBootPins(void) {
|
|
BOARD_InitPins();
|
|
BOARD_InitDEBUG_UARTPins();
|
|
}
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitPins:
|
|
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
|
- pin_list: []
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitPins(void) {
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitDEBUG_UARTPins:
|
|
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
|
|
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
|
- {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
|
|
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitDEBUG_UARTPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitDEBUG_UARTPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
|
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0x10B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0x10B0U);
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitSDRAMPins:
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09}
|
|
- {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10}
|
|
- {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11}
|
|
- {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12}
|
|
- {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13}
|
|
- {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14}
|
|
- {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15}
|
|
- {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16}
|
|
- {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17}
|
|
- {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18}
|
|
- {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23}
|
|
- {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19}
|
|
- {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20}
|
|
- {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21}
|
|
- {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22}
|
|
- {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24}
|
|
- {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27}
|
|
- {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26}
|
|
- {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
|
|
- {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
|
|
- {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
|
|
- {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
|
|
- {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
|
|
- {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
|
|
- {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
|
|
- {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
|
|
- {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30}
|
|
- {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31}
|
|
- {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32}
|
|
- {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33}
|
|
- {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34}
|
|
- {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35}
|
|
- {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36}
|
|
- {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37}
|
|
- {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
|
|
- {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38}
|
|
- {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25}
|
|
- {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28}
|
|
- {pin_num: C7, peripheral: SEMC, signal: 'CSX, 0', pin_signal: GPIO_EMC_41}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitSDRAMPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitSDRAMPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
|
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DA00, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DA01, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DA02, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DA03, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DA04, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DA05, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DA06, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DA07, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DA08, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DA09, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DA10, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DA11, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DA12, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DA13, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DA14, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DA15, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_SEMC_CSX0, 0U);
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitCSIPins:
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08}
|
|
- {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09}
|
|
- {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10}
|
|
- {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11}
|
|
- {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12}
|
|
- {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13}
|
|
- {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15}
|
|
- {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14}
|
|
- {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04}
|
|
- {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05}
|
|
- {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06}
|
|
- {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07}
|
|
- {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
|
|
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
|
- {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
|
|
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
|
- {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitCSIPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitCSIPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
|
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U);
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitLCDPins:
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
|
- {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitLCDPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitLCDPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
|
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U);
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U);
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitCANPins:
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14}
|
|
- {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitCANPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitCANPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
|
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U);
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitENETPins:
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40}
|
|
- {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41}
|
|
- {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10}
|
|
- {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04}
|
|
- {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05}
|
|
- {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06}
|
|
- {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11}
|
|
- {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07}
|
|
- {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08}
|
|
- {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitENETPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitENETPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
|
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U);
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitUSDHCPins:
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
|
|
- {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
|
|
- {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
|
|
- {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
|
|
- {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
|
|
- {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitUSDHCPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitUSDHCPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
|
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitHyperFlashPins:
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
|
|
- {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
|
|
- {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
|
|
- {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
|
|
- {pin_num: L5, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA3, pin_signal: GPIO_SD_B1_00}
|
|
- {pin_num: M5, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA2, pin_signal: GPIO_SD_B1_01}
|
|
- {pin_num: M3, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA1, pin_signal: GPIO_SD_B1_02}
|
|
- {pin_num: M4, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA0, pin_signal: GPIO_SD_B1_03}
|
|
- {pin_num: P2, peripheral: FLEXSPI, signal: FLEXSPI_B_SCLK, pin_signal: GPIO_SD_B1_04}
|
|
- {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
|
|
- {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
|
|
- {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitHyperFlashPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitHyperFlashPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
|
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2, 0U);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3, 0U);
|
|
}
|
|
|
|
/***********************************************************************************************************************
|
|
* EOF
|
|
**********************************************************************************************************************/
|