741 lines
41 KiB
C
741 lines
41 KiB
C
/*
|
|
* Copyright 2017-2021 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
/***********************************************************************************************************************
|
|
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
|
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
|
**********************************************************************************************************************/
|
|
|
|
#ifndef _PIN_MUX_H_
|
|
#define _PIN_MUX_H_
|
|
|
|
/***********************************************************************************************************************
|
|
* Definitions
|
|
**********************************************************************************************************************/
|
|
|
|
/*! @brief Direction type */
|
|
typedef enum _pin_mux_direction
|
|
{
|
|
kPIN_MUX_DirectionInput = 0U, /* Input direction */
|
|
kPIN_MUX_DirectionOutput = 1U, /* Output direction */
|
|
kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */
|
|
} pin_mux_direction_t;
|
|
|
|
/*!
|
|
* @addtogroup pin_mux
|
|
* @{
|
|
*/
|
|
|
|
/***********************************************************************************************************************
|
|
* API
|
|
**********************************************************************************************************************/
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*!
|
|
* @brief Calls initialization functions.
|
|
*
|
|
*/
|
|
void BOARD_InitBootPins(void);
|
|
|
|
|
|
/*!
|
|
* @brief Configures pin routing and optionally pin electrical features.
|
|
*
|
|
*/
|
|
void BOARD_InitPins(void);
|
|
|
|
/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */
|
|
#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< Signal name */
|
|
|
|
/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */
|
|
#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< Signal name */
|
|
|
|
|
|
/*!
|
|
* @brief Configures pin routing and optionally pin electrical features.
|
|
*
|
|
*/
|
|
void BOARD_InitDEBUG_UARTPins(void);
|
|
|
|
/* GPIO_EMC_09 (coord C2), SEMC_A0 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL 0U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_10 (coord G1), SEMC_A1 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL 1U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_11 (coord G3), SEMC_A2 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL 2U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_12 (coord H1), SEMC_A3 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL 3U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_13 (coord A6), SEMC_A4 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL 4U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_14 (coord B6), SEMC_A5 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL 5U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_15 (coord B1), SEMC_A6 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL 6U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_16 (coord A5), SEMC_A7 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL 7U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_17 (coord A4), SEMC_A8 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL 8U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_18 (coord B2), SEMC_A9 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL 9U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_23 (coord G2), SEMC_A10 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL 10U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_19 (coord B4), SEMC_A11 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL 11U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_20 (coord A3), SEMC_A12 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL ADDR /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL 12U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_21 (coord C1), SEMC_BA0 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL BA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL 0U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_22 (coord F1), SEMC_BA1 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL BA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL 1U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_24 (coord D3), SEMC_CAS */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL semc_cas /*!< Signal name */
|
|
|
|
/* GPIO_EMC_27 (coord A2), SEMC_CKE */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL semc_cke /*!< Signal name */
|
|
|
|
/* GPIO_EMC_26 (coord B3), SEMC_CLK */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL semc_clk /*!< Signal name */
|
|
|
|
/* GPIO_EMC_00 (coord E3), SEMC_D0 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL 0U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_01 (coord F3), SEMC_D1 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL 1U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_02 (coord F4), SEMC_D2 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL 2U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_03 (coord G4), SEMC_D3 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL 3U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_04 (coord F2), SEMC_D4 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL 4U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_05 (coord G5), SEMC_D5 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL 5U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_06 (coord H5), SEMC_D6 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL 6U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_07 (coord H4), SEMC_D7 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL 7U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_30 (coord C6), SEMC_D8 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL 8U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_31 (coord C5), SEMC_D9 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL 9U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_32 (coord D5), SEMC_D10 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL 10U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_33 (coord C4), SEMC_D11 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL 11U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_34 (coord D4), SEMC_D12 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL 12U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_35 (coord E5), SEMC_D13 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL 13U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_36 (coord C3), SEMC_D14 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL 14U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_37 (coord E4), SEMC_D15 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL DATA /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL 15U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_08 (coord H3), SEMC_DM0 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL DM /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL 0U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_38 (coord D6), SEMC_DM1 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL DM /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL 1U /*!< Signal channel */
|
|
|
|
/* GPIO_EMC_25 (coord D2), SEMC_RAS */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL semc_ras /*!< Signal name */
|
|
|
|
/* GPIO_EMC_28 (coord D1), SEMC_WE */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL semc_we /*!< Signal name */
|
|
|
|
/* GPIO_EMC_41 (coord C7), ENET_MDIO */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITSDRAMPINS_ENET_MDIO_PERIPHERAL SEMC /*!< Peripheral name */
|
|
#define BOARD_INITSDRAMPINS_ENET_MDIO_SIGNAL CSX /*!< Signal name */
|
|
#define BOARD_INITSDRAMPINS_ENET_MDIO_CHANNEL 0U /*!< Signal channel */
|
|
|
|
|
|
/*!
|
|
* @brief Configures pin routing and optionally pin electrical features.
|
|
*
|
|
*/
|
|
void BOARD_InitSDRAMPins(void);
|
|
|
|
/* GPIO_AD_B1_08 (coord H13), AUD_INT/CSI_D9//J35[13]/J22[4] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_D9_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_D9_SIGNAL csi_data /*!< Signal name */
|
|
#define BOARD_INITCSIPINS_CSI_D9_CHANNEL 9U /*!< Signal channel */
|
|
|
|
/* GPIO_AD_B1_09 (coord M13), SAI1_MCLK/CSI_D8/J35[11] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_D8_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_D8_SIGNAL csi_data /*!< Signal name */
|
|
#define BOARD_INITCSIPINS_CSI_D8_CHANNEL 8U /*!< Signal channel */
|
|
|
|
/* GPIO_AD_B1_10 (coord L13), SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_D7_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_D7_SIGNAL csi_data /*!< Signal name */
|
|
#define BOARD_INITCSIPINS_CSI_D7_CHANNEL 7U /*!< Signal channel */
|
|
|
|
/* GPIO_AD_B1_11 (coord J13), SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_D6_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_D6_SIGNAL csi_data /*!< Signal name */
|
|
#define BOARD_INITCSIPINS_CSI_D6_CHANNEL 6U /*!< Signal channel */
|
|
|
|
/* GPIO_AD_B1_12 (coord H12), SAI1_RXD/CSI_D5/J35[5]/U13[16] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_D5_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_D5_SIGNAL csi_data /*!< Signal name */
|
|
#define BOARD_INITCSIPINS_CSI_D5_CHANNEL 5U /*!< Signal channel */
|
|
|
|
/* GPIO_AD_B1_13 (coord H11), SAI1_TXD/CSI_D4/J35[3]/U13[14] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_D4_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_D4_SIGNAL csi_data /*!< Signal name */
|
|
#define BOARD_INITCSIPINS_CSI_D4_CHANNEL 4U /*!< Signal channel */
|
|
|
|
/* GPIO_AD_B1_15 (coord J14), SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_D2_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_D2_SIGNAL csi_data /*!< Signal name */
|
|
#define BOARD_INITCSIPINS_CSI_D2_CHANNEL 2U /*!< Signal channel */
|
|
|
|
/* GPIO_AD_B1_14 (coord G12), SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_D3_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_D3_SIGNAL csi_data /*!< Signal name */
|
|
#define BOARD_INITCSIPINS_CSI_D3_CHANNEL 3U /*!< Signal channel */
|
|
|
|
/* GPIO_AD_B1_04 (coord L12), CSI_PIXCLK/J35[8]/J23[3] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_PIXCLK_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_PIXCLK_SIGNAL csi_pixclk /*!< Signal name */
|
|
|
|
/* GPIO_AD_B1_05 (coord K12), CSI_MCLK/J35[12]/J23[4] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_MCLK_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_MCLK_SIGNAL csi_mclk /*!< Signal name */
|
|
|
|
/* GPIO_AD_B1_06 (coord J12), CSI_VSYNC/J35[18]/J22[2]/UART_TX */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_VSYNC_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_VSYNC_SIGNAL csi_vsync /*!< Signal name */
|
|
|
|
/* GPIO_AD_B1_07 (coord K10), CSI_HSYNC/J35[16]/J22[1]/UART_RX */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_HSYNC_PERIPHERAL CSI /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_HSYNC_SIGNAL csi_hsync /*!< Signal name */
|
|
|
|
/* GPIO_AD_B1_00 (coord J11), I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_I2C_SCL_PERIPHERAL LPI2C1 /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_I2C_SCL_SIGNAL SCL /*!< Signal name */
|
|
|
|
/* GPIO_AD_B1_01 (coord K11), I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_I2C_SDA_PERIPHERAL LPI2C1 /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_I2C_SDA_SIGNAL SDA /*!< Signal name */
|
|
|
|
/* GPIO_AD_B0_04 (coord F11), CSI_PWDN/J35[17]/BOOT_MODE[0] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCSIPINS_CSI_PWDN_PERIPHERAL GPIO1 /*!< Peripheral name */
|
|
#define BOARD_INITCSIPINS_CSI_PWDN_SIGNAL gpio_io /*!< Signal name */
|
|
#define BOARD_INITCSIPINS_CSI_PWDN_CHANNEL 4U /*!< Signal channel */
|
|
|
|
/* Symbols to be used with GPIO driver */
|
|
#define BOARD_INITCSIPINS_CSI_PWDN_GPIO GPIO1 /*!< GPIO peripheral base pointer */
|
|
#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN 4U /*!< GPIO pin number */
|
|
#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN_MASK (1U << 4U) /*!< GPIO pin mask */
|
|
#define BOARD_INITCSIPINS_CSI_PWDN_PORT GPIO1 /*!< PORT peripheral base pointer */
|
|
#define BOARD_INITCSIPINS_CSI_PWDN_PIN 4U /*!< PORT pin number */
|
|
#define BOARD_INITCSIPINS_CSI_PWDN_PIN_MASK (1U << 4U) /*!< PORT pin mask */
|
|
|
|
|
|
/*!
|
|
* @brief Configures pin routing and optionally pin electrical features.
|
|
*
|
|
*/
|
|
void BOARD_InitCSIPins(void);
|
|
|
|
/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D0_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D0_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D0_CHANNEL 0U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D1_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D1_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D1_CHANNEL 1U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D2_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D2_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D2_CHANNEL 2U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_00 (coord D7), LCDIF_CLK */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_CLK_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_CLK_SIGNAL lcdif_clk /*!< Signal name */
|
|
|
|
/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D3_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D3_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D3_CHANNEL 3U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D4_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D4_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D4_CHANNEL 4U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D5_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D5_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D5_CHANNEL 5U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D6_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D6_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D6_CHANNEL 6U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D7_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D7_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D7_CHANNEL 7U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D8_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D8_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D8_CHANNEL 8U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D9_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D9_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D9_CHANNEL 9U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D10_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D10_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D10_CHANNEL 10U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D11_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D11_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D11_CHANNEL 11U /*!< Signal channel */
|
|
|
|
/* GPIO_B1_00 (coord A11), LCDIF_D12 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D12_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D12_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D12_CHANNEL 12U /*!< Signal channel */
|
|
|
|
/* GPIO_B1_01 (coord B11), LCDIF_D13 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D13_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D13_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D13_CHANNEL 13U /*!< Signal channel */
|
|
|
|
/* GPIO_B1_02 (coord C11), LCDIF_D14 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D14_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D14_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D14_CHANNEL 14U /*!< Signal channel */
|
|
|
|
/* GPIO_B1_03 (coord D11), LCDIF_D15 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_D15_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D15_SIGNAL lcdif_data /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_LCDIF_D15_CHANNEL 15U /*!< Signal channel */
|
|
|
|
/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_ENABLE_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_ENABLE_SIGNAL lcdif_enable /*!< Signal name */
|
|
|
|
/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_HSYNC_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_HSYNC_SIGNAL lcdif_hsync /*!< Signal name */
|
|
|
|
/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_LCDIF_VSYNC_PERIPHERAL LCDIF /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_LCDIF_VSYNC_SIGNAL lcdif_vsync /*!< Signal name */
|
|
|
|
/* GPIO_B1_15 (coord B14), USB_HOST_PWR/BACKLIGHT_CTL */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PERIPHERAL GPIO2 /*!< Peripheral name */
|
|
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_SIGNAL gpio_io /*!< Signal name */
|
|
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_CHANNEL 31U /*!< Signal channel */
|
|
|
|
/* Symbols to be used with GPIO driver */
|
|
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO GPIO2 /*!< GPIO peripheral base pointer */
|
|
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN 31U /*!< GPIO pin number */
|
|
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN_MASK (1U << 31U) /*!< GPIO pin mask */
|
|
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PORT GPIO2 /*!< PORT peripheral base pointer */
|
|
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN 31U /*!< PORT pin number */
|
|
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN_MASK (1U << 31U) /*!< PORT pin mask */
|
|
|
|
|
|
/*!
|
|
* @brief Configures pin routing and optionally pin electrical features.
|
|
*
|
|
*/
|
|
void BOARD_InitLCDPins(void);
|
|
|
|
/* GPIO_AD_B0_14 (coord H14), CAN2_TX/U12[1] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCANPINS_CAN2_TX_PERIPHERAL CAN2 /*!< Peripheral name */
|
|
#define BOARD_INITCANPINS_CAN2_TX_SIGNAL TX /*!< Signal name */
|
|
|
|
/* GPIO_AD_B0_15 (coord L10), CAN2_RX/U12[4] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITCANPINS_CAN2_RX_PERIPHERAL CAN2 /*!< Peripheral name */
|
|
#define BOARD_INITCANPINS_CAN2_RX_SIGNAL RX /*!< Signal name */
|
|
|
|
|
|
/*!
|
|
* @brief Configures pin routing and optionally pin electrical features.
|
|
*
|
|
*/
|
|
void BOARD_InitCANPins(void);
|
|
|
|
/* GPIO_EMC_40 (coord A7), ENET_MDC */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_MDC_SIGNAL enet_mdc /*!< Signal name */
|
|
|
|
/* GPIO_EMC_41 (coord C7), ENET_MDIO */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL enet_mdio /*!< Signal name */
|
|
|
|
/* GPIO_B1_10 (coord B13), ENET_TX_CLK */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL enet_ref_clk /*!< Signal name */
|
|
|
|
/* GPIO_B1_04 (coord E12), ENET_RXD0 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL enet_rx_data /*!< Signal name */
|
|
#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL 0U /*!< Signal channel */
|
|
|
|
/* GPIO_B1_05 (coord D12), ENET_RXD1 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL enet_rx_data /*!< Signal name */
|
|
#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL 1U /*!< Signal channel */
|
|
|
|
/* GPIO_B1_06 (coord C12), ENET_CRS_DV */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL enet_rx_en /*!< Signal name */
|
|
|
|
/* GPIO_B1_11 (coord C13), ENET_RXER */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_RXER_SIGNAL enet_rx_er /*!< Signal name */
|
|
|
|
/* GPIO_B1_07 (coord B12), ENET_TXD0 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL enet_tx_data /*!< Signal name */
|
|
#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL 0U /*!< Signal channel */
|
|
|
|
/* GPIO_B1_08 (coord A12), ENET_TXD1 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL enet_tx_data /*!< Signal name */
|
|
#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL 1U /*!< Signal channel */
|
|
|
|
/* GPIO_B1_09 (coord A13), ENET_TXEN */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL ENET /*!< Peripheral name */
|
|
#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL enet_tx_en /*!< Signal name */
|
|
|
|
|
|
/*!
|
|
* @brief Configures pin routing and optionally pin electrical features.
|
|
*
|
|
*/
|
|
void BOARD_InitENETPins(void);
|
|
|
|
/* GPIO_SD_B0_05 (coord J2), SD1_D3 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Peripheral name */
|
|
#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< Signal name */
|
|
#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< Signal channel */
|
|
|
|
/* GPIO_SD_B0_04 (coord H2), SD1_D2 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Peripheral name */
|
|
#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< Signal name */
|
|
#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< Signal channel */
|
|
|
|
/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Peripheral name */
|
|
#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< Signal name */
|
|
#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< Signal channel */
|
|
|
|
/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Peripheral name */
|
|
#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< Signal name */
|
|
#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< Signal channel */
|
|
|
|
/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Peripheral name */
|
|
#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< Signal name */
|
|
|
|
/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Peripheral name */
|
|
#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< Signal name */
|
|
|
|
|
|
/*!
|
|
* @brief Configures pin routing and optionally pin electrical features.
|
|
*
|
|
*/
|
|
void BOARD_InitUSDHCPins(void);
|
|
|
|
/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_00 (coord L5), FlexSPI_D3_B */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_B_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_B_SIGNAL FLEXSPI_B_DATA3 /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_01 (coord M5), FlexSPI_D2_B */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_B_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_B_SIGNAL FLEXSPI_B_DATA2 /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_02 (coord M3), FlexSPI_D1_B */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_B_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_B_SIGNAL FLEXSPI_B_DATA1 /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_03 (coord M4), FlexSPI_D0_B */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_B_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_B_SIGNAL FLEXSPI_B_DATA0 /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_04 (coord P2), FlexSPI_CLK_B */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_B_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_B_SIGNAL FLEXSPI_B_SCLK /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */
|
|
|
|
/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */
|
|
/* Routed pin properties */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_DQS_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
|
#define BOARD_INITHYPERFLASHPINS_FlexSPI_DQS_SIGNAL FLEXSPI_A_DQS /*!< Signal name */
|
|
|
|
|
|
/*!
|
|
* @brief Configures pin routing and optionally pin electrical features.
|
|
*
|
|
*/
|
|
void BOARD_InitHyperFlashPins(void);
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
/*!
|
|
* @}
|
|
*/
|
|
#endif /* _PIN_MUX_H_ */
|
|
|
|
/***********************************************************************************************************************
|
|
* EOF
|
|
**********************************************************************************************************************/
|