Overview
========
This example demonstrates the SDK Peripheral drivers working with different methods.
This example demonstrates use of smartcard driver API to read GSM sim card ICC-ID (Integrated circuit card identifier,
which should be placed on the card).
Please be aware, that this example is just simple demonstration of smartcard driver API. It may not work with all types
of GSM sim cards.
Toolchain supported
===================
- Keil MDK 5.24a
- IAR embedded Workbench 8.22.2
- GCC ARM Embedded 7-2017-q4-major
- MCUXpresso10.2.0
Hardware requirements
=====================
- Mini/micro USB cable
- MAPS-KS22F256 board & MAPS-DOCK board
- Personal Computer
- GSM sim card
Board settings
==============
The hello_world demo is configured to use UART1 with PTE0 and PTE1 pins. To make JLink serial
device work, the jumpers on MAPS-DOCK board should be set as following:
- JP7 on MAPS-Dock: UART0 related jumpers connected
Prepare the Demo
================
1. Connect a mini USB cable between the PC host and the USB port (CN14) on MAPS-DOCK board.
2. Open a serial terminal on PC for JLink serial device with these settings:
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
3. Download the program to the target board.
4. Either press the reset button on your board or launch the debugger in your IDE to begin running
the demo.
Running the demo
================
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
***** SMARTCARD Driver Send Receive functionality example *****
Card inserted.
Deactivating card...Done!
Resetting/Activating card...Done!
Selecting Master root file.
Getting response of selection command.
Selecting ICC-ID file.
Reading binary ICC-ID.
Received smartcard ICC-IC: 000000000000000000
Send receive functionality example finished!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Customization options
=====================
