Overview
========
This document explains the freertos_tickless example. It shows the CPU enter at sleep mode and then
it is waked up by expired time delay that using GPT module.
Toolchain supported
===================
- Keil MDK 5.24a
- IAR embedded Workbench 8.22.2
- GCC ARM Embedded 7-2017-q4-major
- MCUXpresso10.2.0
Hardware requirements
=====================
- J-Link ARM
- Mini USB cable
- MAPS-KS22F256 board & MAPS-DOCK board
- Personal Computer
Board settings
==============
The freertos_tickless example is configured to use UART1 with PTE0 and PTE1 pins. To make JLink serial
device work, the jumpers on MAPS-DOCK board should be set as following:
- JP7 on MAPS-Dock: UART0 related jumpers connected
Prepare the Demo
================
1. Connect a mini USB cable between the PC host and the USB port (CN14) on MAPS-DOCK board.
2. Open a serial terminal on PC for JLink serial device with these settings:
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
3. Download the program to the target board.
4. Either press the reset button on your board or launch the debugger in your IDE to begin running
the demo. For detailed instructions, see Getting Started with Software Development Kit for
KS22F25612 (document SDKKS22F256GSUG).
Running the demo
================
Customization options
=====================
