openocd/src/target/target/str912.cfg

# script for str9

# jtag speed. We need to stick to 16kHz until we've finished reset.

jtag_rclk 16
proc target_0_pre_reset {} {
	jtag_rclk 16
}

proc target_0_post_reset {} {
	# We can increase speed now that we know the target is halted.
	jtag_rclk 3000
	
	# -- Enable 96K RAM
	# PFQBC enabled / DTCM & AHB wait-states disabled
	mww 0x5C002034 0x0191 

	str9x flash_config 0 4 2 0 0x80000
	flash protect 0 0 7 off
	
	
}


jtag_nsrst_delay 100
jtag_ntrst_delay 100

#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst

#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 8 0x1 0x1 0xfe
jtag_device 4 0x1 0xf 0xe
jtag_device 5 0x1 0x1 0x1e

#target <type> <startup mode>
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm966e little 1 arm966e



working_area 0 0x50000000 16384 nobackup

#flash bank str9x <base> <size> 0 0 <target#> <variant>
flash bank str9x 0x00000000 0x00080000 0 0 0
flash bank str9x 0x00080000 0x00008000 0 0 0

# For more information about the configuration files, take a look at:
# openocd.texi