imi415/openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e44539d66c
openocd/contrib/loaders/flash/stmqspi/stmqspi_write.inc

19 lines
1.4 KiB
PHP
Raw Normal View History

Flash, FRAM and EEPROM driver for STM32 QUAD-/OCTOSPI interface - write speed up to 150 kByte/s on STM32F469I-disco (due to SWD clock and USB connection), up to 1 MByte/s on Nucleo-F767ZI with external STLink-V3 or Nucleo-G474RE with two W25Q256FV in dual 4-line mode or STM32H73BI-Disco in octal mode - tested with STM32L476G-disco (64MBit flash, 3-byte addr), STM32F412G-Disco, STM32F469I-Disco, STM32F746G-Disco, and STM32L476G-Disco (all 128Mbit flash, 3-byte addr), STM32F723E-Disco, STM32F769I-Disco (512Mbit flash, 4-byte addr) STM32L4R9I-Disco, STM32L4P5G-Disco (512MBit octo-flash, DTR, 4-byte addr) STM32H745I-Disco, STM32H747I-Disco (two 512MBit flash, 4-byte addr) STM32H73BI-Disco, STM32H735G-Disco (512MBit octo-flash, DTR, 4-byte addr) - suitable cfg for Discovery boards included - limited parsing of SFDP data if flash device not hardcoded (tested only in single/quad mode as most devices either don't support SFDP at all or have empty(!) SFDP memory) - 'set' command for auto detection override (e. g. for EEPROMs) - 'cmd' command for arbitrary SPI commands (reconfiguration, testing etc.) - makefile for creation of binary loader files - tcl/board/stm32f469discovery.cfg superseded by stm32f469i-disco.cfg - tcl/board/stm32f7discovery.cfg removed as name is ambiguous (superseded by stm32f746g-disco.cfg vs. stm32f769i-disco.cfg) - dual 4-line mode tested on Nucleo-F767ZI, Nucleo-H743ZI and Nucleo-H7A3ZI-Q with two W25Q256FV, and on Nucleo-L496ZP-P and Nucleo-L4R5ZI with two W25Q128FV, sample cfg files included and on STM32H745I-Disco, STM32H747I-Disco, STM32H750B-Disco - read/verify/erase_check uses indirect read mode to work around silicon bug in H7, L4+ and MP1 memory mapped mode (last bytes not readable, accessing last bytes causes debug interface to hang) - octospi supported only in single/dual 1-line, 2-line, 4-line and single 8-line modes, (not in hyper flash mode) Requirements: GPIOs must be initialized appropriately, and SPI flash chip be configured appropriately (1-line ..., QPI, 4-byte addresses ...). This is board/chip specific, cf. included cfg files. The driver infers most parameters from current setting in CR, CCR, ... registers. Change-Id: I54858fbbe8758c3a5fe58812e93f5f39514704f8 Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-on: http://openocd.zylin.com/4321 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Christopher Head <chead@zaber.com>
2016-12-21 09:35:58 +00:00
/* Autogenerated with ../../../../src/helper/bin2char.sh */
0x01,0x38,0x01,0x39,0x41,0x4c,0x1f,0x68,0x7f,0x06,0xff,0x0f,0xba,0x46,0x02,0x25,
0x1f,0x68,0x2f,0x43,0x1f,0x60,0x20,0x25,0xed,0x18,0x9f,0x68,0xbf,0x09,0xfc,0xd2,
0x02,0x27,0xdf,0x60,0x57,0x46,0x1f,0x61,0x2c,0x4f,0x5f,0x61,0x9f,0x68,0x2f,0x78,
0x7f,0x08,0xec,0xd2,0x57,0x46,0x3f,0x42,0x02,0xd0,0x2f,0x78,0x7f,0x08,0xe6,0xd2,
0x00,0x42,0x41,0xd4,0x9f,0x68,0xbf,0x09,0xfc,0xd2,0x02,0x27,0xdf,0x60,0x27,0x4f,
0x5f,0x61,0x9f,0x68,0xbf,0x09,0xfc,0xd2,0x02,0x27,0xdf,0x60,0x57,0x46,0x1f,0x61,
0x1e,0x4f,0x5f,0x61,0x9f,0x68,0x2f,0x78,0xbf,0x08,0x2b,0xd3,0x57,0x46,0x3f,0x42,
0x02,0xd0,0x2f,0x78,0xbf,0x08,0x25,0xd3,0x9f,0x68,0xbf,0x09,0xfc,0xd2,0x02,0x27,
0xdf,0x60,0x17,0x46,0x0f,0x43,0xbf,0x1a,0x87,0x42,0x00,0xd9,0x07,0x46,0x1f,0x61,
0x1a,0x4f,0x5f,0x61,0x9a,0x61,0x9f,0x68,0x1b,0x4f,0x00,0x2f,0x14,0xd0,0xbc,0x42,
0xfa,0xd0,0x27,0x78,0x2f,0x70,0x01,0x34,0x4c,0x45,0x00,0xd3,0x44,0x46,0x17,0xa7,
0x3c,0x60,0x01,0x32,0x01,0x38,0x01,0xd4,0x0a,0x42,0xed,0xd1,0x9f,0x68,0xbf,0x08,
0xfc,0xd3,0xa4,0xe7,0x00,0x20,0x02,0x38,0x01,0x30,0x02,0x25,0x1f,0x68,0x2f,0x43,
0x1f,0x60,0xc0,0x46,0x00,0xbe,0xc0,0x46,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
Reference in New Issue Copy Permalink