openocd/tcl/board/microchip_same54_xplained_pro.cfg

#
# Microchip (former Atmel) SAM E54 Xplained Pro evaluation kit.
# http://www.microchip.com/developmenttools/productdetails.aspx?partno=atsame54-xpro
#

source [find interface/cmsis-dap.cfg]

set CHIPNAME same54

source [find target/atsame5x.cfg]

reset_config srst_only
flash/nor: flash driver and cfg for SAM E54, E53, E51 and D51 The new Microchip (former Atmel) series powered by Cortex-M4 looks very similar to older M0+ powered SAM D2x at the first sight. Unfortunately the new series differs a lot in important details. NVMCTRL has different register addresses, moved important bits and even changed binary command set. An universal driver for all SAM D/E would be very complicated. That's why a new driver was derived. Tested on Microchip SAM E54 Xplained Pro kit (board cfg included). Adjusted for the restructured dap support. Checked by valgrind and clang static analyzer. Change-Id: I26c67047a552076f4b207b9b89285a53d69b4ca4 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4272 Tested-by: jenkins Reviewed-by: Andres Vahter <andres.vahter@gmail.com> 2017-10-27 19:43:25 +00:00			`#`
			`# Microchip (former Atmel) SAM E54 Xplained Pro evaluation kit.`
			`# http://www.microchip.com/developmenttools/productdetails.aspx?partno=atsame54-xpro`
			`#`

			`source [find interface/cmsis-dap.cfg]`

			`set CHIPNAME same54`

			`source [find target/atsame5x.cfg]`

			`reset_config srst_only`