Fix spelling of ARM Cortex

It's Cortex-Xn, not Cortex Xn or cortex xn or cortex-xn or CORTEX-Xn
or CortexXn. Further it's Cortex-M0+, not M0plus.

Cf. http://www.arm.com/products/processors/index.php

Consistently write it the official way, so that it stops propagating.
Originally spotted in the documentation, it mainly affects code comments
but also Atmel SAM3/SAM4/SAMV, NiietCM4 and SiM3x flash driver output.

Found via:

  git grep -i "Cortex "
  git grep -i "Cortex-" | grep -v "Cortex-" | grep -v ".cpu"
  git grep -i "CortexM"

Change-Id: Ic7b6ca85253e027f6f0f751c628d1a2a391fe914
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3483
Tested-by: jenkins
Reviewed-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
This commit is contained in:
Andreas Färber 2016-05-14 20:21:49 +02:00 committed by Freddie Chopin
parent f630fac2e7
commit 0c8ec7c826
45 changed files with 66 additions and 66 deletions

View File

@ -77,7 +77,7 @@ This is always a 32bit hex number.
Examples: Examples:
0x1f0f0f0f - is an old ARM7TDMI 0x1f0f0f0f - is an old ARM7TDMI
0x3f0f0f0f - is a newer ARM7TDMI 0x3f0f0f0f - is a newer ARM7TDMI
0x3ba00477 - is an ARM cortex M3 0x3ba00477 - is an ARM Cortex-M3
Some chips have multiple JTAG taps - be sure to list Some chips have multiple JTAG taps - be sure to list
each one individually - ORDER is important! each one individually - ORDER is important!

4
TODO
View File

@ -170,9 +170,9 @@ https://lists.berlios.de/pipermail/openocd-development/2009-October/011506.html
garabage. garabage.
- implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...) - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...)
- Thumb2 single stepping: ARM1156T2 needs simulator support - Thumb2 single stepping: ARM1156T2 needs simulator support
- Cortex A8 support (ML) - Cortex-A8 support (ML)
- add target implementation (ML) - add target implementation (ML)
- Cortex M3 support - Cortex-M3 support
- when stepping, only write dirtied registers (be faster) - when stepping, only write dirtied registers (be faster)
- when connecting to halted core, fetch registers (startup is quirky) - when connecting to halted core, fetch registers (startup is quirky)
- Generic ARM run_algorithm() interface - Generic ARM run_algorithm() interface

View File

@ -27,8 +27,8 @@
/* Written for NRF51822 (src/flash/nor/nrf51.c) however the NRF NVMC is /* Written for NRF51822 (src/flash/nor/nrf51.c) however the NRF NVMC is
* very generic (CPU blocks during flash writes), so this is actually * very generic (CPU blocks during flash writes), so this is actually
* just a generic word-oriented copy routine for cortex-m0 (also * just a generic word-oriented copy routine for Cortex-M0 (also
* suitable for cortex m0plus/m3/m4.) * suitable for Cortex-M0+/M3/M4.)
* *
* To assemble: * To assemble:
* arm-none-eabi-gcc -c cortex-m0.S * arm-none-eabi-gcc -c cortex-m0.S

View File

@ -995,7 +995,7 @@ For example, there may be configuration files for your JTAG adapter
and target chip, but you need a new board-specific config file and target chip, but you need a new board-specific config file
giving access to your particular flash chips. giving access to your particular flash chips.
Or you might need to write another target chip configuration file Or you might need to write another target chip configuration file
for a new chip built around the Cortex M3 core. for a new chip built around the Cortex-M3 core.
@quotation Note @quotation Note
When you write new configuration files, please submit When you write new configuration files, please submit
@ -5215,7 +5215,7 @@ The AVR 8-bit microcontrollers from Atmel integrate flash memory.
@deffn {Flash Driver} efm32 @deffn {Flash Driver} efm32
All members of the EFM32 microcontroller family from Energy Micro include All members of the EFM32 microcontroller family from Energy Micro include
internal flash and use ARM Cortex M3 cores. The driver automatically recognizes internal flash and use ARM Cortex-M3 cores. The driver automatically recognizes
a number of these chips using the chip identification register, and a number of these chips using the chip identification register, and
autoconfigures itself. autoconfigures itself.
@example @example
@ -5235,7 +5235,7 @@ supported.}
@deffn {Flash Driver} fm3 @deffn {Flash Driver} fm3
All members of the FM3 microcontroller family from Fujitsu All members of the FM3 microcontroller family from Fujitsu
include internal flash and use ARM Cortex M3 cores. include internal flash and use ARM Cortex-M3 cores.
The @var{fm3} driver uses the @var{target} parameter to select the The @var{fm3} driver uses the @var{target} parameter to select the
correct bank config, it can currently be one of the following: correct bank config, it can currently be one of the following:
@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu}, @code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu},
@ -5267,7 +5267,7 @@ nor is Chip Erase (only Sector Erase is implemented).}
@deffn {Flash Driver} kinetis @deffn {Flash Driver} kinetis
@cindex kinetis @cindex kinetis
Kx and KLx members of the Kinetis microcontroller family from Freescale include Kx and KLx members of the Kinetis microcontroller family from Freescale include
internal flash and use ARM Cortex M0+ or M4 cores. The driver automatically internal flash and use ARM Cortex-M0+ or M4 cores. The driver automatically
recognizes flash size and a number of flash banks (1-4) using the chip recognizes flash size and a number of flash banks (1-4) using the chip
identification register, and autoconfigures itself. identification register, and autoconfigures itself.
@ -5325,7 +5325,7 @@ Command disables watchdog timer.
@deffn {Flash Driver} kinetis_ke @deffn {Flash Driver} kinetis_ke
@cindex kinetis_ke @cindex kinetis_ke
KE members of the Kinetis microcontroller family from Freescale include KE members of the Kinetis microcontroller family from Freescale include
internal flash and use ARM Cortex M0+. The driver automatically recognizes internal flash and use ARM Cortex-M0+. The driver automatically recognizes
the KE family and sub-family using the chip identification register, and the KE family and sub-family using the chip identification register, and
autoconfigures itself. autoconfigures itself.
@ -5686,7 +5686,7 @@ This will remove any Code Protection.
@deffn {Flash Driver} psoc4 @deffn {Flash Driver} psoc4
All members of the PSoC 41xx/42xx microcontroller family from Cypress All members of the PSoC 41xx/42xx microcontroller family from Cypress
include internal flash and use ARM Cortex M0 cores. include internal flash and use ARM Cortex-M0 cores.
The driver automatically recognizes a number of these chips using The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself. the chip identification register, and autoconfigures itself.
@ -5720,7 +5720,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
@deffn {Flash Driver} sim3x @deffn {Flash Driver} sim3x
All members of the SiM3 microcontroller family from Silicon Laboratories All members of the SiM3 microcontroller family from Silicon Laboratories
include internal flash and use ARM Cortex M3 cores. It supports both JTAG include internal flash and use ARM Cortex-M3 cores. It supports both JTAG
and SWD interface. and SWD interface.
The @var{sim3x} driver tries to probe the device to auto detect the MCU. The @var{sim3x} driver tries to probe the device to auto detect the MCU.
If this failes, it will use the @var{size} parameter as the size of flash bank. If this failes, it will use the @var{size} parameter as the size of flash bank.

View File

@ -2482,7 +2482,7 @@ static const char *const eproc_names[] = {
_unknown, /* 0 */ _unknown, /* 0 */
"arm946es", /* 1 */ "arm946es", /* 1 */
"arm7tdmi", /* 2 */ "arm7tdmi", /* 2 */
"cortex-m3", /* 3 */ "Cortex-M3", /* 3 */
"arm920t", /* 4 */ "arm920t", /* 4 */
"arm926ejs", /* 5 */ "arm926ejs", /* 5 */
_unknown, /* 6 */ _unknown, /* 6 */

View File

@ -1407,11 +1407,11 @@ static const char *const eproc_names[] = {
_unknown, /* 0 */ _unknown, /* 0 */
"arm946es", /* 1 */ "arm946es", /* 1 */
"arm7tdmi", /* 2 */ "arm7tdmi", /* 2 */
"cortex-m3", /* 3 */ "Cortex-M3", /* 3 */
"arm920t", /* 4 */ "arm920t", /* 4 */
"arm926ejs", /* 5 */ "arm926ejs", /* 5 */
"cortex-a5", /* 6 */ "Cortex-A5", /* 6 */
"cortex-m4", /* 7 */ "Cortex-M4", /* 7 */
_unknown, /* 8 */ _unknown, /* 8 */
_unknown, /* 9 */ _unknown, /* 9 */
_unknown, /* 10 */ _unknown, /* 10 */

View File

@ -355,7 +355,7 @@ static int samv_probe(struct flash_bank *bank)
uint8_t eproc = (device_id >> 5) & 0x7; uint8_t eproc = (device_id >> 5) & 0x7;
if (eproc != 0) { if (eproc != 0) {
LOG_ERROR("unexpected eproc code: %d was expecting 0 (cortex-m7)", eproc); LOG_ERROR("unexpected eproc code: %d was expecting 0 (Cortex-M7)", eproc);
return ERROR_FAIL; return ERROR_FAIL;
} }

View File

@ -144,11 +144,11 @@ static int efm32x_read_info(struct flash_bank *bank,
return ret; return ret;
if (((cpuid >> 4) & 0xfff) == 0xc23) { if (((cpuid >> 4) & 0xfff) == 0xc23) {
/* Cortex M3 device */ /* Cortex-M3 device */
} else if (((cpuid >> 4) & 0xfff) == 0xc24) { } else if (((cpuid >> 4) & 0xfff) == 0xc24) {
/* Cortex M4 device(WONDER GECKO) */ /* Cortex-M4 device (WONDER GECKO) */
} else if (((cpuid >> 4) & 0xfff) == 0xc60) { } else if (((cpuid >> 4) & 0xfff) == 0xc60) {
/* Cortex M0plus device */ /* Cortex-M0+ device */
} else { } else {
LOG_ERROR("Target is not Cortex-Mx Device"); LOG_ERROR("Target is not Cortex-Mx Device");
return ERROR_FAIL; return ERROR_FAIL;

View File

@ -1719,7 +1719,7 @@ static int niietcm4_auto_probe(struct flash_bank *bank)
static int get_niietcm4_info(struct flash_bank *bank, char *buf, int buf_size) static int get_niietcm4_info(struct flash_bank *bank, char *buf, int buf_size)
{ {
struct niietcm4_flash_bank *niietcm4_info = bank->driver_priv; struct niietcm4_flash_bank *niietcm4_info = bank->driver_priv;
LOG_INFO("\nNIIET Cortex M4F %s\n%s", niietcm4_info->chip_name, niietcm4_info->chip_brief); LOG_INFO("\nNIIET Cortex-M4F %s\n%s", niietcm4_info->chip_name, niietcm4_info->chip_brief);
snprintf(buf, buf_size, " "); snprintf(buf, buf_size, " ");
return ERROR_OK; return ERROR_OK;

View File

@ -748,7 +748,7 @@ static int sim3x_read_info(struct flash_bank *bank)
} }
if (((cpuid >> 4) & 0xfff) != 0xc23) { if (((cpuid >> 4) & 0xfff) != 0xc23) {
LOG_ERROR("Target is not CortexM3"); LOG_ERROR("Target is not Cortex-M3");
return ERROR_FAIL; return ERROR_FAIL;
} }
@ -1009,7 +1009,7 @@ COMMAND_HANDLER(sim3x_lock)
return ret; return ret;
if ((val & CPUID_CHECK_VALUE_MASK) != CPUID_CHECK_VALUE) { if ((val & CPUID_CHECK_VALUE_MASK) != CPUID_CHECK_VALUE) {
LOG_ERROR("Target is not ARM CortexM3 or is already locked"); LOG_ERROR("Target is not ARM Cortex-M3 or is already locked");
return ERROR_FAIL; return ERROR_FAIL;
} }
} else { } else {

View File

@ -32,7 +32,7 @@
***************************************************************************/ ***************************************************************************/
/*************************************************************************** /***************************************************************************
* Version 1.0 Tested on a MCBSTM32 board using a Cortex M3 (stm32f103x), * * Version 1.0 Tested on a MCBSTM32 board using a Cortex-M3 (stm32f103x), *
* GDB and Eclipse under Linux (Ubuntu 10.04) * * GDB and Eclipse under Linux (Ubuntu 10.04) *
* * * *
***************************************************************************/ ***************************************************************************/

View File

@ -1164,7 +1164,7 @@ static int stlink_usb_step(void *handle)
if (h->jtag_api == STLINK_JTAG_API_V2) { if (h->jtag_api == STLINK_JTAG_API_V2) {
/* TODO: this emulates the v1 api, it should really use a similar auto mask isr /* TODO: this emulates the v1 api, it should really use a similar auto mask isr
* that the cortex-m3 currently does. */ * that the Cortex-M3 currently does. */
stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN); stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN);
stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_STEP|C_MASKINTS|C_DEBUGEN); stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_STEP|C_MASKINTS|C_DEBUGEN);
return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN); return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN);

View File

@ -226,7 +226,7 @@ static int ChibiOS_update_stacking(struct rtos *rtos)
/* Sometimes the stacking can not be determined only by looking at the /* Sometimes the stacking can not be determined only by looking at the
* target name but only a runtime. * target name but only a runtime.
* *
* For example, this is the case for cortex-m4 targets and ChibiOS which * For example, this is the case for Cortex-M4 targets and ChibiOS which
* only stack the FPU registers if it is enabled during ChibiOS build. * only stack the FPU registers if it is enabled during ChibiOS build.
* *
* Terminating which stacking is used is target depending. * Terminating which stacking is used is target depending.
@ -248,7 +248,7 @@ static int ChibiOS_update_stacking(struct rtos *rtos)
struct ChibiOS_params *param; struct ChibiOS_params *param;
param = (struct ChibiOS_params *) rtos->rtos_specific_params; param = (struct ChibiOS_params *) rtos->rtos_specific_params;
/* Check for armv7m with *enabled* FPU, i.e. a Cortex M4 */ /* Check for armv7m with *enabled* FPU, i.e. a Cortex-M4 */
struct armv7m_common *armv7m_target = target_to_armv7m(rtos->target); struct armv7m_common *armv7m_target = target_to_armv7m(rtos->target);
if (is_armv7m(armv7m_target)) { if (is_armv7m(armv7m_target)) {
if (armv7m_target->fp_feature == FPv4_SP) { if (armv7m_target->fp_feature == FPv4_SP) {

View File

@ -430,7 +430,7 @@ static int FreeRTOS_get_thread_reg_list(struct rtos *rtos, int64_t thread_id, ch
thread_id + param->thread_stack_offset, thread_id + param->thread_stack_offset,
stack_ptr); stack_ptr);
/* Check for armv7m with *enabled* FPU, i.e. a Cortex M4F */ /* Check for armv7m with *enabled* FPU, i.e. a Cortex-M4F */
int cm4_fpu_enabled = 0; int cm4_fpu_enabled = 0;
struct armv7m_common *armv7m_target = target_to_armv7m(rtos->target); struct armv7m_common *armv7m_target = target_to_armv7m(rtos->target);
if (is_armv7m(armv7m_target)) { if (is_armv7m(armv7m_target)) {

View File

@ -109,7 +109,7 @@ static int mqx_valid_address_check(
enum mqx_arch arch_type = ((struct mqx_params *)rtos->rtos_specific_params)->target_arch; enum mqx_arch arch_type = ((struct mqx_params *)rtos->rtos_specific_params)->target_arch;
const char * targetname = ((struct mqx_params *)rtos->rtos_specific_params)->target_name; const char * targetname = ((struct mqx_params *)rtos->rtos_specific_params)->target_name;
/* Cortex M address range */ /* Cortex-M address range */
if (arch_type == mqx_arch_cortexm) { if (arch_type == mqx_arch_cortexm) {
if ( if (
/* code and sram area */ /* code and sram area */

View File

@ -182,7 +182,7 @@ int64_t rtos_generic_stack_align8(struct target *target,
stacking, stack_ptr, 8); stacking, stack_ptr, 8);
} }
/* The Cortex M3 will indicate that an alignment adjustment /* The Cortex-M3 will indicate that an alignment adjustment
* has been done on the stack by setting bit 9 of the stacked xPSR * has been done on the stack by setting bit 9 of the stacked xPSR
* register. In this case, we can just add an extra 4 bytes to get * register. In this case, we can just add an extra 4 bytes to get
* to the program stack. Note that some places in the ARM documentation * to the program stack. Note that some places in the ARM documentation

View File

@ -177,7 +177,7 @@ done:
return retval; return retval;
} }
/* method adapted to cortex A : reused arm v4 v5 method*/ /* method adapted to Cortex-A : reused ARM v4 v5 method */
int armv7a_mmu_translate_va(struct target *target, uint32_t va, uint32_t *val) int armv7a_mmu_translate_va(struct target *target, uint32_t va, uint32_t *val)
{ {
uint32_t first_lvl_descriptor = 0x0; uint32_t first_lvl_descriptor = 0x0;

View File

@ -18,7 +18,7 @@
* michel.jaouen@stericsson.com : smp minimum support * * michel.jaouen@stericsson.com : smp minimum support *
* * * *
* Copyright (C) Broadcom 2012 * * Copyright (C) Broadcom 2012 *
* ehunter@broadcom.com : Cortex R4 support * * ehunter@broadcom.com : Cortex-R4 support *
* * * *
* Copyright (C) 2013 Kamal Dasu * * Copyright (C) 2013 Kamal Dasu *
* kdasu.kdev@gmail.com * * kdasu.kdev@gmail.com *
@ -2664,7 +2664,7 @@ out:
/* /*
* Cortex-A Memory access * Cortex-A Memory access
* *
* This is same Cortex M3 but we must also use the correct * This is same Cortex-M3 but we must also use the correct
* ap number for every access. * ap number for every access.
*/ */

View File

@ -1932,7 +1932,7 @@ int cortex_m_examine(struct target *target)
} }
LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid); LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
/* test for floating point feature on cortex-m4 */ /* test for floating point feature on Cortex-M4 */
if (i == 4) { if (i == 4) {
target_read_u32(target, MVFR0, &mvfr0); target_read_u32(target, MVFR0, &mvfr0);
target_read_u32(target, MVFR1, &mvfr1); target_read_u32(target, MVFR1, &mvfr1);

View File

@ -27,7 +27,7 @@ jtag newtap $_CHIPNAME.fpga tap -irlen 10 -ircapture 0x01 -irmask 0x3 -expected-
# #
# Cortex A9 target # Cortex-A9 target
# #
# GDB target: Cortex-A9, using DAP, configuring only one core # GDB target: Cortex-A9, using DAP, configuring only one core
@ -59,6 +59,6 @@ $_TARGETNAME1 configure -event gdb-attach { halt }
#$_TARGETNAME2 configure -event gdb-attach { halt } #$_TARGETNAME2 configure -event gdb-attach { halt }
proc cycv_dbginit {target} { proc cycv_dbginit {target} {
# General Cortex A8/A9 debug initialisation # General Cortex-A8/A9 debug initialisation
cortex_a dbginit cortex_a dbginit
} }

View File

@ -63,13 +63,13 @@ proc enable_default_taps { taps } {
} }
# #
# Cortex M3 target # Cortex-M3 target
# #
set _TARGETNAME_2 $_CHIPNAME.m3 set _TARGETNAME_2 $_CHIPNAME.m3
target create $_TARGETNAME_2 cortex_m -chain-position $_CHIPNAME.m3_dap target create $_TARGETNAME_2 cortex_m -chain-position $_CHIPNAME.m3_dap
# #
# Cortex A8 target # Cortex-A8 target
# #
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -dbgbase 0x80001000 target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -dbgbase 0x80001000

View File

@ -484,7 +484,7 @@ jtag configure $JRC_NAME -event setup "jtag tapenable $DEBUGSS_NAME"
jtag configure $JRC_NAME -event post-reset "runtest 100" jtag configure $JRC_NAME -event post-reset "runtest 100"
# #
# Cortex A9 target # Cortex-A9 target
# #
target create $_TARGETNAME cortex_a -chain-position $DEBUGSS_NAME -coreid 0 -dbgbase 0x80000000 target create $_TARGETNAME cortex_a -chain-position $DEBUGSS_NAME -coreid 0 -dbgbase 0x80000000

View File

@ -199,7 +199,7 @@ $_TARGETNAME configure -event gdb-attach {
# Run this to enable invasive debugging. This is run automatically in the # Run this to enable invasive debugging. This is run automatically in the
# reset sequence. # reset sequence.
proc amdm37x_dbginit {target} { proc amdm37x_dbginit {target} {
# General Cortex A8 debug initialisation # General Cortex-A8 debug initialisation
cortex_a dbginit cortex_a dbginit
# Enable DBGEN signal. This signal is described in the ARM v7 TRM, but # Enable DBGEN signal. This signal is described in the ARM v7 TRM, but

View File

@ -1,4 +1,4 @@
# script for ATMEL sam3, a CORTEX-M3 chip # script for ATMEL sam3, a Cortex-M3 chip
# #
# at91sam3u4e # at91sam3u4e
# at91sam3u2e # at91sam3u2e

View File

@ -1,4 +1,4 @@
# script for ATMEL sam3, a CORTEX-M3 chip # script for ATMEL sam3, a Cortex-M3 chip
# #
# at91sam3A4C # at91sam3A4C
# at91sam3A8C # at91sam3A8C

View File

@ -1,4 +1,4 @@
# script for ATMEL sam3, a CORTEX-M3 chip # script for ATMEL sam3, a Cortex-M3 chip
# #
# at91sam3s4c # at91sam3s4c
# at91sam3s4b # at91sam3s4b

View File

@ -1,4 +1,4 @@
# script for ATMEL sam3, a CORTEX-M3 chip # script for ATMEL sam3, a Cortex-M3 chip
# #
# at91sam3u4e # at91sam3u4e
# at91sam3u2e # at91sam3u2e

View File

@ -1,5 +1,5 @@
# #
# script for ATMEL sam4, a CORTEX-M4 chip # script for ATMEL sam4, a Cortex-M4 chip
# #
# #

View File

@ -1,4 +1,4 @@
# script for ATMEL sam4l, a CORTEX-M4 chip # script for ATMEL sam4l, a Cortex-M4 chip
# #
source [find target/at91sam4XXX.cfg] source [find target/at91sam4XXX.cfg]

View File

@ -1,4 +1,4 @@
# script for ATMEL sam4, a CORTEX-M4 chip # script for ATMEL sam4, a Cortex-M4 chip
# #
source [find target/at91sam4XXX.cfg] source [find target/at91sam4XXX.cfg]

View File

@ -1,4 +1,4 @@
# script for ATMEL sam4sd32, a CORTEX-M4 chip # script for ATMEL sam4sd32, a Cortex-M4 chip
# #
source [find target/at91sam4XXX.cfg] source [find target/at91sam4XXX.cfg]

View File

@ -1,5 +1,5 @@
# #
# script for Atmel SAMD, SAMR, SAML or SAMC, a CORTEX-M0 chip # script for Atmel SAMD, SAMR, SAML or SAMC, a Cortex-M0 chip
# #
# #

View File

@ -1,4 +1,4 @@
# script for the ATMEL samg5x CORTEX-M4F chip family # script for the ATMEL samg5x Cortex-M4F chip family
# #
source [find target/at91sam4XXX.cfg] source [find target/at91sam4XXX.cfg]

View File

@ -17,7 +17,7 @@ if { [info exists DAP_TAPID] } {
jtag newtap $_CHIPNAME dap -expected-id $_DAP_TAPID -irlen 4 jtag newtap $_CHIPNAME dap -expected-id $_DAP_TAPID -irlen 4
# Dual Cortex A9s # Dual Cortex-A9
set _TARGETNAME0 $_CHIPNAME.cpu0 set _TARGETNAME0 $_CHIPNAME.cpu0
set _TARGETNAME1 $_CHIPNAME.cpu1 set _TARGETNAME1 $_CHIPNAME.cpu1

View File

@ -37,7 +37,7 @@ jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
jtag configure $_CHIPNAME.jrc -event post-reset "ti_cjtag_to_4pin_jtag $_CHIPNAME.jrc" jtag configure $_CHIPNAME.jrc -event post-reset "ti_cjtag_to_4pin_jtag $_CHIPNAME.jrc"
# #
# Cortex M3 target # Cortex-M3 target
# #
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.dap target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.dap

View File

@ -47,7 +47,7 @@ if {[using_jtag]} {
} }
# #
# Cortex M3 target # Cortex-M3 target
# #
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.dap target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.dap

View File

@ -27,7 +27,7 @@ if {[using_jtag]} {
jtag_ntrst_delay 100 jtag_ntrst_delay 100
} }
# Fujitsu cortex-M3 reset configuration # Fujitsu Cortex-M3 reset configuration
reset_config trst_only reset_config trst_only
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID

View File

@ -40,7 +40,7 @@ jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP" jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
proc imx51_dbginit {target} { proc imx51_dbginit {target} {
# General Cortex A8 debug initialisation # General Cortex-A8 debug initialisation
cortex_a dbginit cortex_a dbginit
} }

View File

@ -40,7 +40,7 @@ jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP" jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
proc imx53_dbginit {target} { proc imx53_dbginit {target} {
# General Cortex A8 debug initialisation # General Cortex-A8 debug initialisation
cortex_a dbginit cortex_a dbginit
} }

View File

@ -47,7 +47,7 @@ target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap \
jtag configure $_CHIPNAME.sjc -event post-reset "runtest 100" jtag configure $_CHIPNAME.sjc -event post-reset "runtest 100"
proc imx6_dbginit {target} { proc imx6_dbginit {target} {
# General Cortex A8/A9 debug initialisation # General Cortex-A8/A9 debug initialisation
cortex_a dbginit cortex_a dbginit
} }

View File

@ -56,7 +56,7 @@ if { [info exists CPUTAPID] } {
# Allow user override # Allow user override
set _CPUTAPID $CPUTAPID set _CPUTAPID $CPUTAPID
} else { } else {
# LPC8xx/LPC11xx/LPC12xx use a Cortex M0/M0+ core, LPC13xx/LPC17xx use a Cortex M3 core,LPC40xx use a Cortex-M4F core. # LPC8xx/LPC11xx/LPC12xx use a Cortex-M0/M0+ core, LPC13xx/LPC17xx use a Cortex-M3 core, LPC40xx use a Cortex-M4F core.
if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" } { if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" } {
set _CPUTAPID 0x0bb11477 set _CPUTAPID 0x0bb11477
} elseif { $_CHIPSERIES == "lpc1300" || $_CHIPSERIES == "lpc1700" || $_CHIPSERIES == "lpc4000" } { } elseif { $_CHIPSERIES == "lpc1300" || $_CHIPSERIES == "lpc1700" || $_CHIPSERIES == "lpc4000" } {
@ -148,10 +148,10 @@ if {[using_jtag]} {
jtag_ntrst_delay 200 jtag_ntrst_delay 200
} }
# LPC8xx (Cortex M0+ core) support SYSRESETREQ # LPC8xx (Cortex-M0+ core) support SYSRESETREQ
# LPC11xx/LPC12xx (Cortex M0 core) support SYSRESETREQ # LPC11xx/LPC12xx (Cortex-M0 core) support SYSRESETREQ
# LPC13xx/LPC17xx (Cortex M3 core) support SYSRESETREQ # LPC13xx/LPC17xx (Cortex-M3 core) support SYSRESETREQ
# LPC40xx (Cortex M4F core) support SYSRESETREQ # LPC40xx (Cortex-M4F core) support SYSRESETREQ
if {![using_hla]} { if {![using_hla]} {
# if srst is not fitted use SYSRESETREQ to # if srst is not fitted use SYSRESETREQ to
# perform a soft reset # perform a soft reset

View File

@ -1,5 +1,5 @@
# #
# script for Nordic nRF51 series, a CORTEX-M0 chip # script for Nordic nRF51 series, a Cortex-M0 chip
# #
source [find target/swj-dp.tcl] source [find target/swj-dp.tcl]

View File

@ -53,7 +53,7 @@ jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"
jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap" jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
proc omap3_dbginit {target} { proc omap3_dbginit {target} {
# General Cortex A8 debug initialisation # General Cortex-A8 debug initialisation
cortex_a dbginit cortex_a dbginit
# Enable DBGU signal for OMAP353x # Enable DBGU signal for OMAP353x
$target mww phys 0x5401d030 0x00002000 $target mww phys 0x5401d030 0x00002000

View File

@ -1,7 +1,7 @@
# #
# Target configuration for the ST STM32W108xx chips # Target configuration for the ST STM32W108xx chips
# #
# Processor: ARM Cortex M3 # Processor: ARM Cortex-M3
# Date: 2013-06-09 # Date: 2013-06-09
# Author: Giuseppe Barba <giuseppe.barba@gmail.com> # Author: Giuseppe Barba <giuseppe.barba@gmail.com>

View File

@ -53,7 +53,7 @@ jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap" jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100" jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"
# Cortex R4 target # Cortex-R4 target
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_r4 -endian $_ENDIAN \ target create $_TARGETNAME cortex_r4 -endian $_ENDIAN \
-chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x00001003 -chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x00001003