diff --git a/tcl/target/icepick.cfg b/tcl/target/icepick.cfg
index 36b0b7033..d1250711b 100644
--- a/tcl/target/icepick.cfg
+++ b/tcl/target/icepick.cfg
@@ -75,9 +75,22 @@ proc icepick_c_setup {jrc} {
 }
 
 # jrc	== TAP name for the ICEpick
-# port	== a port number, 0..15
+# port	== a port number, 0..15 for debug tap, 16..31 for test tap
 proc icepick_c_tapenable {jrc port} {
 
+	if { ($port >= 0) && ($port < 16) } {
+		# Debug tap"
+		set tap $port
+		set block 0x2
+	} elseif { $port < 32 } {
+		# Test tap
+		set tap [expr ($port - 16)]
+		set block 0x1
+	} else {
+		echo "ERROR: Invalid ICEPick C port number: $port"
+		return
+	}
+
 	# First CONNECT to the ICEPick
 #	echo "Connecting to ICEPick"
 	icepick_c_connect $jrc
@@ -90,18 +103,18 @@ proc icepick_c_tapenable {jrc port} {
 	# And never to enter RESET, which will disable the TAPs.
 
 	# first enable power and clock for TAP
-	icepick_c_router $jrc 1 0x2 $port 0x110048
+	icepick_c_router $jrc 1 $block $tap 0x110048
 
 	# TRM states that the register should be read back here, skipped for now
 
 	# enable debug "default" mode
-	icepick_c_router $jrc 1 0x2 $port 0x112048
+	icepick_c_router $jrc 1 $block $tap 0x112048
 
 	# TRM states that debug enable and debug mode should be read back and
 	# confirmed - skipped for now
 
 	# Finally select the tap
-	icepick_c_router $jrc 1 0x2 $port 0x112148
+	icepick_c_router $jrc 1 $block $tap 0x112148
 
 	# Enter the bypass state
 	irscan $jrc [CONST IR_BYPASS] -endstate RUN/IDLE
@@ -119,6 +132,7 @@ proc icepick_d_set_core_control {jrc coreid value } {
 # Follow the sequence described in
 # http://processors.wiki.ti.com/images/f/f6/Router_Scan_Sequence-ICEpick-D.pdf
 proc icepick_d_tapenable {jrc port coreid { value 0x2008 } } {
+
 	# First CONNECT to the ICEPick
 	icepick_c_connect $jrc
 	icepick_c_setup $jrc