imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

scripts: update flash bank names 

As the flash bank name is now unique update the scripts to suit.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
This commit is contained in:
Spencer Oliver 2010-05-12 23:04:57 +01:00
parent a7fb60dc7b
commit 215a5f7442
9 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
tcl/board/hitex_str9-comstick.cfg
View File

@ -73,7 +73,7 @@ $_TARGETNAME configure -event reset-init {
$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
#flash bank <driver> <base> <size> <chip_width> <bus_width>
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0

4
tcl/board/lubbock.cfg
View File

@ -12,9 +12,9 @@ jtag_ntrst_delay 250
# CS0, CS1 -- two banks of CFI flash, 32 MBytes each
# each bank is 32-bits wide, two 16-bit chips in parallel
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME cfi 0x04000000 0x02000000 2 4 $_TARGETNAME
# CS2 low -- FPGA registers

4
tcl/board/str910-eval.cfg
View File

@ -58,9 +58,9 @@ $_TARGETNAME configure -event reset-init {
}
#flash bank str9x <base> <size> 0 0 <target#> <variant>
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0
# For more information about the configuration files, take a look at:

4
tcl/target/at91sam3u4c.cfg
View File

@ -2,10 +2,10 @@
source [find target/at91sam3uxx.cfg]
# size is automatically "calculated" by probing
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME
# This is a 256K chip, it has the 2nd bank
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME

4
tcl/target/at91sam3u4e.cfg
View File

@ -2,10 +2,10 @@
source [find target/at91sam3uXX.cfg]
# size is automatically "calculated" by probing
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME
# This is a 256K chip - it has the 2nd bank
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME

4
tcl/target/pic32mx.cfg
View File

@ -67,9 +67,9 @@ $_TARGETNAME configure -event reset-init {
mww 0xbf882030 $_PIC32MX_PROGSIZE
}
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME pic32mx 0x1fc00000 0 0 0 $_TARGETNAME
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME pic32mx 0x1d000000 0 0 0 $_TARGETNAME
# For more information about the configuration files, take a look at:

4
tcl/target/str710.cfg
View File

@ -47,9 +47,9 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
$_TARGETNAME configure -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0
#flash bank str7x <base> <size> 0 0 <target#> <variant>
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 $_TARGETNAME STR71x
# For more information about the configuration files, take a look at:

4
tcl/target/str750.cfg
View File

@ -53,8 +53,8 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
#flash bank <driver> <base> <size> <chip_width> <bus_width>
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 $_TARGETNAME STR75x
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str7x 0x200C0000 0x00004000 0 0 $_TARGETNAME STR75x

4
tcl/target/str912.cfg
View File

@ -63,9 +63,9 @@ $_TARGETNAME configure -event reset-init {
$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
#flash bank str9x <base> <size> 0 0 <target#> <variant>
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 $_TARGETNAME
set _FLASHNAME $_CHIPNAME.flash
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 $_TARGETNAME
# For more information about the configuration files, take a look at: