tcl/board: update ST NUCLEO-H745ZI-Q configuration file to use dapdirect
this board embeds and STLINK DAP capable firmware Change-Id: I276e9f44ad6cf7d1ff664898bbc884676bdbc967 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5316 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is contained in:
parent
35f846fd52
commit
22df29eee8
|
@ -1,16 +1,14 @@
|
||||||
# This is an ST NUCLEO-H745ZI-Q board with single STM32H745ZITx chip.
|
# This is an ST NUCLEO-H745ZI-Q board with single STM32H745ZITx chip.
|
||||||
|
|
||||||
source [find interface/stlink.cfg]
|
source [find interface/stlink-dap.cfg]
|
||||||
transport select hla_swd
|
transport select dapdirect_swd
|
||||||
|
|
||||||
# ST-Link HLA interface do not support multi-AP debugging
|
# STM32H745xx devices are dual core (Cortex-M7 and Cortex-M4)
|
||||||
# then setting DUAL_CORE and USE_CTI has no effect, because
|
|
||||||
# it will fall back to single core configuration
|
|
||||||
set DUAL_CORE 1
|
set DUAL_CORE 1
|
||||||
|
|
||||||
|
# enable CTI for cross halting both cores
|
||||||
set USE_CTI 1
|
set USE_CTI 1
|
||||||
|
|
||||||
source [find target/stm32h7x_dual_bank.cfg]
|
source [find target/stm32h7x_dual_bank.cfg]
|
||||||
|
|
||||||
# when using ST-Link HLA adapter, DBGMCU accesses are done via AP0
|
|
||||||
# unfortunately DBGMCU is not accessible when SRST is asserted
|
|
||||||
reset_config srst_only
|
reset_config srst_only
|
||||||
|
|
Loading…
Reference in New Issue