imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

tcl at91samdXX.cfg: update config to current OpenOCD status 

Remove comment about workaround of not working 'reset halt' - not needed
as 'reset halt' is working as expected @ EDBG with srst_only.
Add srst_pulls_trst to reset_config as it no more triggers an error.

Change-Id: I47cf445690c46ccfb866900cddbfcaefc8649f82
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3722
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
This commit is contained in:
Tomas Vanek 2016-08-24 11:18:41 +02:00 committed by Paul Fertser
parent bcaf775fc1
commit 25d7ba19c9
1 changed files with 1 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
tcl/target/at91samdXX.cfg
View File

@ -50,13 +50,7 @@ $_TARGETNAME configure -event reset-deassert-post {
}
# SRST (wired to RESET_N) resets debug circuitry
# srst_pulls_trst is not configured here to avoid an error raised in reset halt
reset_config srst_gates_jtag
# Atmel's EDBG (on-board cmsis-dap adapter of Xplained kits) cannot
# stop the MCU before it starts executing code if hardware RESETN
# line is configured by command "reset_config srst_only"
# Use "reset_config none" (default) before flash programming.
reset_config srst_gates_jtag srst_pulls_trst
# Do not use a reset button with other SWD adapter than Atmel's EDBG.
# DSU usually locks MCU in reset state until you issue a reset command