flash/nor: Add PSoC 5LP flash driver
Always probe for ECC mode and display ECC sectors if disabled. Non-ECC write is implemented as zeroing the ECC/config bytes. Erasing ECC sectors is ignored, erase-checking takes them into account. Tested with CY8CKIT-059 (CY8C5888), except ECC mode. Change-Id: If63b9ffca7ad8de038be3c086c49712b629ec554 Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Signed-off-by: Forest Crossman <cyrozap@gmail.com> Reviewed-on: http://openocd.zylin.com/3432 Tested-by: jenkins
This commit is contained in:
Andreas Färber
Tomas Vanek
parent
d02de3a8a9
commit
2d5f2ede55
4
README
4
README
|
|
@ -125,8 +125,8 @@ Flash drivers
|
|||
|
||||
ADUC702x, AT91SAM, ATH79, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, FM4, Kinetis,
|
||||
LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI, Marvell QSPI,
|
||||
Milandr, NIIET, NuMicro, PIC32mx, PSoC4, SiM3x, Stellaris, STM32, STMSMI,
|
||||
STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx,
|
||||
Milandr, NIIET, NuMicro, PIC32mx, PSoC4, PSoC5LP, SiM3x, Stellaris, STM32,
|
||||
STMSMI, STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx,
|
||||
i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400, XMC1xxx, XMC4xxx.
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -6142,6 +6142,32 @@ The @var{num} parameter is a value shown by @command{flash banks}.
|
|||
@end deffn
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} psoc5lp
|
||||
All members of the PSoC 5LP microcontroller family from Cypress
|
||||
include internal program flash and use ARM Cortex-M3 cores.
|
||||
The driver probes for a number of these chips and autoconfigures itself,
|
||||
apart from the base address.
|
||||
|
||||
@example
|
||||
flash bank $_FLASHNAME psoc5lp 0x00000000 0 0 0 $_TARGETNAME
|
||||
@end example
|
||||
|
||||
@b{Note:} PSoC 5LP chips can be configured to have ECC enabled or disabled.
|
||||
@quotation Attention
|
||||
If flash operations are performed in ECC-disabled mode, they will also affect
|
||||
the ECC flash region. Erasing a 16k flash sector in the 0x00000000 area will
|
||||
then also erase the corresponding 2k data bytes in the 0x48000000 area.
|
||||
Writing to the ECC data bytes in ECC-disabled mode is not implemented.
|
||||
@end quotation
|
||||
|
||||
Commands defined in the @var{psoc5lp} driver:
|
||||
|
||||
@deffn Command {psoc5lp mass_erase}
|
||||
Erases all flash data and ECC/configuration bytes, all flash protection rows,
|
||||
and all row latches in all flash arrays on the device.
|
||||
@end deffn
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} psoc6
|
||||
Supports PSoC6 (CY8C6xxx) family of Cypress microcontrollers.
|
||||
PSoC6 is a dual-core device with CM0+ and CM4 cores. Both cores share
|
||||
|
|
|
|||
|
|
@ -43,6 +43,7 @@ NOR_DRIVERS = \
|
|||
%D%/ocl.c \
|
||||
%D%/pic32mx.c \
|
||||
%D%/psoc4.c \
|
||||
%D%/psoc5lp.c \
|
||||
%D%/psoc6.c \
|
||||
%D%/sim3x.c \
|
||||
%D%/spi.c \
|
||||
|
|
|
|||
|
|
@ -56,6 +56,7 @@ extern struct flash_driver numicro_flash;
|
|||
extern struct flash_driver ocl_flash;
|
||||
extern struct flash_driver pic32mx_flash;
|
||||
extern struct flash_driver psoc4_flash;
|
||||
extern struct flash_driver psoc5lp_flash;
|
||||
extern struct flash_driver psoc6_flash;
|
||||
extern struct flash_driver sim3x_flash;
|
||||
extern struct flash_driver stellaris_flash;
|
||||
|
|
@ -115,6 +116,7 @@ static struct flash_driver *flash_drivers[] = {
|
|||
&ocl_flash,
|
||||
&pic32mx_flash,
|
||||
&psoc4_flash,
|
||||
&psoc5lp_flash,
|
||||
&psoc6_flash,
|
||||
&sim3x_flash,
|
||||
&stellaris_flash,
|
||||
|
|
|
|||
|
|
@ -0,0 +1,975 @@
|
|||
/*
|
||||
* PSoC 5LP flash driver
|
||||
*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifdef HAVE_CONFIG_H
|
||||
#include "config.h"
|
||||
#endif
|
||||
|
||||
#include "imp.h"
|
||||
#include <helper/time_support.h>
|
||||
#include <target/armv7m.h>
|
||||
|
||||
#define PM_ACT_CFG0 0x400043A0
|
||||
#define SPC_CPU_DATA 0x40004720
|
||||
#define SPC_SR 0x40004722
|
||||
#define PHUB_CH0_BASIC_CFG 0x40007010
|
||||
#define PHUB_CH0_ACTION 0x40007014
|
||||
#define PHUB_CH0_BASIC_STATUS 0x40007018
|
||||
#define PHUB_CH1_BASIC_CFG 0x40007020
|
||||
#define PHUB_CH1_ACTION 0x40007024
|
||||
#define PHUB_CH1_BASIC_STATUS 0x40007028
|
||||
#define PHUB_CFGMEM0_CFG0 0x40007600
|
||||
#define PHUB_CFGMEM0_CFG1 0x40007604
|
||||
#define PHUB_CFGMEM1_CFG0 0x40007608
|
||||
#define PHUB_CFGMEM1_CFG1 0x4000760C
|
||||
#define PHUB_TDMEM0_ORIG_TD0 0x40007800
|
||||
#define PHUB_TDMEM0_ORIG_TD1 0x40007804
|
||||
#define PHUB_TDMEM1_ORIG_TD0 0x40007808
|
||||
#define PHUB_TDMEM1_ORIG_TD1 0x4000780C
|
||||
#define PANTHER_DEVICE_ID 0x4008001C
|
||||
|
||||
#define SPC_KEY1 0xB6
|
||||
#define SPC_KEY2 0xD3
|
||||
|
||||
#define SPC_LOAD_BYTE 0x00
|
||||
#define SPC_LOAD_MULTI_BYTE 0x01
|
||||
#define SPC_LOAD_ROW 0x02
|
||||
#define SPC_READ_BYTE 0x03
|
||||
#define SPC_READ_MULTI_BYTE 0x04
|
||||
#define SPC_WRITE_ROW 0x05
|
||||
#define SPC_WRITE_USER_NVL 0x06
|
||||
#define SPC_PRG_ROW 0x07
|
||||
#define SPC_ERASE_SECTOR 0x08
|
||||
#define SPC_ERASE_ALL 0x09
|
||||
#define SPC_READ_HIDDEN_ROW 0x0A
|
||||
#define SPC_PROGRAM_PROTECT_ROW 0x0B
|
||||
#define SPC_GET_CHECKSUM 0x0C
|
||||
#define SPC_GET_TEMP 0x0E
|
||||
#define SPC_READ_VOLATILE_BYTE 0x10
|
||||
|
||||
#define SPC_ARRAY_ALL 0x3F
|
||||
#define SPC_ARRAY_EEPROM 0x40
|
||||
#define SPC_ARRAY_NVL_USER 0x80
|
||||
#define SPC_ARRAY_NVL_WO 0xF8
|
||||
|
||||
#define SPC_ROW_PROTECTION 0
|
||||
|
||||
#define SPC_OPCODE_LEN 3
|
||||
|
||||
#define SPC_SR_DATA_READY (1 << 0)
|
||||
#define SPC_SR_IDLE (1 << 1)
|
||||
|
||||
#define PM_ACT_CFG0_EN_CLK_SPC (1 << 3)
|
||||
|
||||
#define PHUB_CHx_BASIC_CFG_EN (1 << 0)
|
||||
#define PHUB_CHx_BASIC_CFG_WORK_SEP (1 << 5)
|
||||
|
||||
#define PHUB_CHx_ACTION_CPU_REQ (1 << 0)
|
||||
|
||||
#define PHUB_CFGMEMx_CFG0 (1 << 7)
|
||||
|
||||
#define PHUB_TDMEMx_ORIG_TD0_NEXT_TD_PTR_LAST (0xff << 16)
|
||||
#define PHUB_TDMEMx_ORIG_TD0_INC_SRC_ADDR (1 << 24)
|
||||
|
||||
#define NVL_3_ECCEN (1 << 3)
|
||||
|
||||
#define ROW_SIZE 256
|
||||
#define ROW_ECC_SIZE 32
|
||||
#define ROWS_PER_SECTOR 64
|
||||
#define SECTOR_SIZE (ROWS_PER_SECTOR * ROW_SIZE)
|
||||
#define ROWS_PER_BLOCK 256
|
||||
#define BLOCK_SIZE (ROWS_PER_BLOCK * ROW_SIZE)
|
||||
#define SECTORS_PER_BLOCK (BLOCK_SIZE / SECTOR_SIZE)
|
||||
|
||||
#define PART_NUMBER_LEN (17 + 1)
|
||||
|
||||
struct psoc5lp_device {
|
||||
uint32_t id;
|
||||
unsigned fam;
|
||||
unsigned speed_mhz;
|
||||
unsigned flash_kb;
|
||||
unsigned eeprom_kb;
|
||||
};
|
||||
|
||||
/*
|
||||
* Device information collected from datasheets.
|
||||
* Different temperature ranges (C/I/Q/A) may share IDs, not differing otherwise.
|
||||
*/
|
||||
static const struct psoc5lp_device psoc5lp_devices[] = {
|
||||
/* CY8C58LP Family Datasheet */
|
||||
{ .id = 0x2E11F069, .fam = 8, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E120069, .fam = 8, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E123069, .fam = 8, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E124069, .fam = 8, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E126069, .fam = 8, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E127069, .fam = 8, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E117069, .fam = 8, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E118069, .fam = 8, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E119069, .fam = 8, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E11C069, .fam = 8, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E114069, .fam = 8, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E115069, .fam = 8, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E116069, .fam = 8, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E160069, .fam = 8, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
/* '' */
|
||||
{ .id = 0x2E161069, .fam = 8, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
/* '' */
|
||||
{ .id = 0x2E1D2069, .fam = 8, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E1D6069, .fam = 8, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
|
||||
/* CY8C56LP Family Datasheet */
|
||||
{ .id = 0x2E10A069, .fam = 6, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E10D069, .fam = 6, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E10E069, .fam = 6, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E106069, .fam = 6, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E108069, .fam = 6, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E109069, .fam = 6, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E101069, .fam = 6, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E104069, .fam = 6, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
/* '' */
|
||||
{ .id = 0x2E105069, .fam = 6, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E128069, .fam = 6, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
/* '' */
|
||||
{ .id = 0x2E122069, .fam = 6, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E129069, .fam = 6, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E163069, .fam = 6, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E156069, .fam = 6, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E1D3069, .fam = 6, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
|
||||
/* CY8C54LP Family Datasheet */
|
||||
{ .id = 0x2E11A069, .fam = 4, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E16A069, .fam = 4, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E12A069, .fam = 4, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E103069, .fam = 4, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E16C069, .fam = 4, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E102069, .fam = 4, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E148069, .fam = 4, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E155069, .fam = 4, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E16B069, .fam = 4, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E12B069, .fam = 4, .speed_mhz = 67, .flash_kb = 32, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E168069, .fam = 4, .speed_mhz = 67, .flash_kb = 32, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E178069, .fam = 4, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E15D069, .fam = 4, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E1D4069, .fam = 4, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
|
||||
/* CY8C52LP Family Datasheet */
|
||||
{ .id = 0x2E11E069, .fam = 2, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E12F069, .fam = 2, .speed_mhz = 67, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E133069, .fam = 2, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E159069, .fam = 2, .speed_mhz = 67, .flash_kb = 128, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E11D069, .fam = 2, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E121069, .fam = 2, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E184069, .fam = 2, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E196069, .fam = 2, .speed_mhz = 67, .flash_kb = 64, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E132069, .fam = 2, .speed_mhz = 67, .flash_kb = 32, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E138069, .fam = 2, .speed_mhz = 67, .flash_kb = 32, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E13A069, .fam = 2, .speed_mhz = 67, .flash_kb = 32, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E152069, .fam = 2, .speed_mhz = 67, .flash_kb = 32, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E15F069, .fam = 2, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E15A069, .fam = 2, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
{ .id = 0x2E1D5069, .fam = 2, .speed_mhz = 80, .flash_kb = 256, .eeprom_kb = 2 },
|
||||
};
|
||||
|
||||
static void psoc5lp_get_part_number(const struct psoc5lp_device *dev, char *str)
|
||||
{
|
||||
strcpy(str, "CY8Cabcdefg-LPxxx");
|
||||
|
||||
str[4] = '5';
|
||||
str[5] = '0' + dev->fam;
|
||||
|
||||
switch (dev->speed_mhz) {
|
||||
case 67:
|
||||
str[6] = '6';
|
||||
break;
|
||||
case 80:
|
||||
str[6] = '8';
|
||||
break;
|
||||
default:
|
||||
str[6] = '?';
|
||||
}
|
||||
|
||||
switch (dev->flash_kb) {
|
||||
case 32:
|
||||
str[7] = '5';
|
||||
break;
|
||||
case 64:
|
||||
str[7] = '6';
|
||||
break;
|
||||
case 128:
|
||||
str[7] = '7';
|
||||
break;
|
||||
case 256:
|
||||
str[7] = '8';
|
||||
break;
|
||||
default:
|
||||
str[7] = '?';
|
||||
}
|
||||
|
||||
/* Package does not matter. */
|
||||
strncpy(str + 8, "xx", 2);
|
||||
|
||||
/* Temperate range cannot uniquely be identified. */
|
||||
str[10] = 'x';
|
||||
}
|
||||
|
||||
static int psoc5lp_get_device_id(struct target *target, uint32_t *id)
|
||||
{
|
||||
int retval;
|
||||
|
||||
retval = target_read_u32(target, PANTHER_DEVICE_ID, id); /* dummy read */
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_read_u32(target, PANTHER_DEVICE_ID, id);
|
||||
return retval;
|
||||
}
|
||||
|
||||
static int psoc5lp_find_device(struct target *target,
|
||||
const struct psoc5lp_device **device)
|
||||
{
|
||||
uint32_t device_id;
|
||||
unsigned i;
|
||||
int retval;
|
||||
|
||||
*device = NULL;
|
||||
|
||||
retval = psoc5lp_get_device_id(target, &device_id);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
LOG_DEBUG("PANTHER_DEVICE_ID = 0x%08" PRIX32, device_id);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(psoc5lp_devices); i++) {
|
||||
if (psoc5lp_devices[i].id == device_id) {
|
||||
*device = &psoc5lp_devices[i];
|
||||
return ERROR_OK;
|
||||
}
|
||||
}
|
||||
|
||||
LOG_ERROR("Device 0x%08" PRIX32 " not supported", device_id);
|
||||
return ERROR_FLASH_OPER_UNSUPPORTED;
|
||||
}
|
||||
|
||||
static int psoc5lp_spc_enable_clock(struct target *target)
|
||||
{
|
||||
int retval;
|
||||
uint8_t pm_act_cfg0;
|
||||
|
||||
retval = target_read_u8(target, PM_ACT_CFG0, &pm_act_cfg0);
|
||||
if (retval != ERROR_OK) {
|
||||
LOG_ERROR("Cannot read PM_ACT_CFG0");
|
||||
return retval;
|
||||
}
|
||||
|
||||
if (pm_act_cfg0 & PM_ACT_CFG0_EN_CLK_SPC)
|
||||
return ERROR_OK; /* clock already enabled */
|
||||
|
||||
retval = target_write_u8(target, PM_ACT_CFG0, pm_act_cfg0 | PM_ACT_CFG0_EN_CLK_SPC);
|
||||
if (retval != ERROR_OK)
|
||||
LOG_ERROR("Cannot enable SPC clock");
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
static int psoc5lp_spc_write_opcode(struct target *target, uint8_t opcode)
|
||||
{
|
||||
int retval;
|
||||
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, SPC_KEY1);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, SPC_KEY2 + opcode);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, opcode);
|
||||
return retval;
|
||||
}
|
||||
|
||||
static void psoc5lp_spc_write_opcode_buffer(struct target *target,
|
||||
uint8_t *buf, uint8_t opcode)
|
||||
{
|
||||
buf[0] = SPC_KEY1;
|
||||
buf[1] = SPC_KEY2 + opcode;
|
||||
buf[2] = opcode;
|
||||
}
|
||||
|
||||
static int psoc5lp_spc_busy_wait_data(struct target *target)
|
||||
{
|
||||
int64_t endtime;
|
||||
uint8_t sr;
|
||||
int retval;
|
||||
|
||||
retval = target_read_u8(target, SPC_SR, &sr); /* dummy read */
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
endtime = timeval_ms() + 1000; /* 1 second timeout */
|
||||
do {
|
||||
alive_sleep(1);
|
||||
retval = target_read_u8(target, SPC_SR, &sr);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
if (sr == SPC_SR_DATA_READY)
|
||||
return ERROR_OK;
|
||||
} while (timeval_ms() < endtime);
|
||||
|
||||
return ERROR_FLASH_OPERATION_FAILED;
|
||||
}
|
||||
|
||||
static int psoc5lp_spc_busy_wait_idle(struct target *target)
|
||||
{
|
||||
int64_t endtime;
|
||||
uint8_t sr;
|
||||
int retval;
|
||||
|
||||
retval = target_read_u8(target, SPC_SR, &sr); /* dummy read */
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
endtime = timeval_ms() + 1000; /* 1 second timeout */
|
||||
do {
|
||||
alive_sleep(1);
|
||||
retval = target_read_u8(target, SPC_SR, &sr);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
if (sr == SPC_SR_IDLE)
|
||||
return ERROR_OK;
|
||||
} while (timeval_ms() < endtime);
|
||||
|
||||
return ERROR_FLASH_OPERATION_FAILED;
|
||||
}
|
||||
|
||||
static int psoc5lp_spc_read_byte(struct target *target,
|
||||
uint8_t array_id, uint8_t offset, uint8_t *data)
|
||||
{
|
||||
int retval;
|
||||
|
||||
retval = psoc5lp_spc_write_opcode(target, SPC_READ_BYTE);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, array_id);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, offset);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_data(target);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = target_read_u8(target, SPC_CPU_DATA, data);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_idle(target);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
static int psoc5lp_spc_erase_sector(struct target *target,
|
||||
uint8_t array_id, uint8_t row_id)
|
||||
{
|
||||
int retval;
|
||||
|
||||
retval = psoc5lp_spc_write_opcode(target, SPC_ERASE_SECTOR);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, array_id);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, row_id);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_idle(target);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
static int psoc5lp_spc_erase_all(struct target *target)
|
||||
{
|
||||
int retval;
|
||||
|
||||
retval = psoc5lp_spc_write_opcode(target, SPC_ERASE_ALL);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_idle(target);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
static int psoc5lp_spc_read_hidden_row(struct target *target,
|
||||
uint8_t array_id, uint8_t row_id, uint8_t *data)
|
||||
{
|
||||
int i, retval;
|
||||
|
||||
retval = psoc5lp_spc_write_opcode(target, SPC_READ_HIDDEN_ROW);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, array_id);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, row_id);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_data(target);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
for (i = 0; i < ROW_SIZE; i++) {
|
||||
retval = target_read_u8(target, SPC_CPU_DATA, &data[i]);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
}
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_idle(target);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
static int psoc5lp_spc_get_temp(struct target *target, uint8_t samples,
|
||||
uint8_t *data)
|
||||
{
|
||||
int retval;
|
||||
|
||||
retval = psoc5lp_spc_write_opcode(target, SPC_GET_TEMP);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_write_u8(target, SPC_CPU_DATA, samples);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_data(target);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = target_read_u8(target, SPC_CPU_DATA, &data[0]);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
retval = target_read_u8(target, SPC_CPU_DATA, &data[1]);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_idle(target);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
/*
|
||||
* Program Flash
|
||||
*/
|
||||
|
||||
struct psoc5lp_flash_bank {
|
||||
bool probed;
|
||||
const struct psoc5lp_device *device;
|
||||
bool ecc_enabled;
|
||||
};
|
||||
|
||||
static int psoc5lp_erase(struct flash_bank *bank, int first, int last)
|
||||
{
|
||||
struct psoc5lp_flash_bank *psoc_bank = bank->driver_priv;
|
||||
int i, retval;
|
||||
|
||||
if (!psoc_bank->ecc_enabled) {
|
||||
/* Silently avoid erasing sectors twice */
|
||||
if (last >= first + bank->num_sectors / 2) {
|
||||
LOG_DEBUG("Skipping duplicate erase of sectors %d to %d",
|
||||
first + bank->num_sectors / 2, last);
|
||||
last = first + (bank->num_sectors / 2) - 1;
|
||||
}
|
||||
/* Check for any remaining ECC sectors */
|
||||
if (last >= bank->num_sectors / 2) {
|
||||
LOG_WARNING("Skipping erase of ECC region sectors %d to %d",
|
||||
bank->num_sectors / 2, last);
|
||||
last = (bank->num_sectors / 2) - 1;
|
||||
}
|
||||
}
|
||||
|
||||
for (i = first; i <= last; i++) {
|
||||
retval = psoc5lp_spc_erase_sector(bank->target,
|
||||
i / SECTORS_PER_BLOCK, i % SECTORS_PER_BLOCK);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
}
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
/* Derived from core.c:default_flash_blank_check() */
|
||||
static int psoc5lp_erase_check(struct flash_bank *bank)
|
||||
{
|
||||
struct psoc5lp_flash_bank *psoc_bank = bank->driver_priv;
|
||||
struct target *target = bank->target;
|
||||
uint32_t blank;
|
||||
int i, num_sectors, retval;
|
||||
|
||||
if (target->state != TARGET_HALTED) {
|
||||
LOG_ERROR("Target not halted");
|
||||
return ERROR_TARGET_NOT_HALTED;
|
||||
}
|
||||
|
||||
num_sectors = bank->num_sectors;
|
||||
if (!psoc_bank->ecc_enabled)
|
||||
num_sectors /= 2;
|
||||
|
||||
for (i = 0; i < num_sectors; i++) {
|
||||
uint32_t address = bank->base + bank->sectors[i].offset;
|
||||
uint32_t size = bank->sectors[i].size;
|
||||
|
||||
retval = armv7m_blank_check_memory(target, address, size,
|
||||
&blank, bank->erased_value);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
if (blank == 0x00 && !psoc_bank->ecc_enabled) {
|
||||
address = bank->base + bank->sectors[num_sectors + i].offset;
|
||||
size = bank->sectors[num_sectors + i].size;
|
||||
|
||||
retval = armv7m_blank_check_memory(target, address, size,
|
||||
&blank, bank->erased_value);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
}
|
||||
|
||||
if (blank == 0x00) {
|
||||
bank->sectors[i].is_erased = 1;
|
||||
bank->sectors[num_sectors + i].is_erased = 1;
|
||||
} else {
|
||||
bank->sectors[i].is_erased = 0;
|
||||
bank->sectors[num_sectors + i].is_erased = 0;
|
||||
}
|
||||
}
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
static int psoc5lp_write(struct flash_bank *bank, const uint8_t *buffer,
|
||||
uint32_t offset, uint32_t byte_count)
|
||||
{
|
||||
struct psoc5lp_flash_bank *psoc_bank = bank->driver_priv;
|
||||
struct target *target = bank->target;
|
||||
struct working_area *code_area, *even_row_area, *odd_row_area;
|
||||
uint32_t row_size;
|
||||
uint8_t temp[2], buf[12], ecc_bytes[ROW_ECC_SIZE];
|
||||
unsigned array_id, row;
|
||||
int i, retval;
|
||||
|
||||
if (offset + byte_count > bank->size) {
|
||||
LOG_ERROR("Writing to ECC not supported");
|
||||
return ERROR_FLASH_DST_OUT_OF_BANK;
|
||||
}
|
||||
|
||||
if (offset % ROW_SIZE != 0) {
|
||||
LOG_ERROR("Writes must be row-aligned, got offset 0x%08" PRIx32,
|
||||
offset);
|
||||
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
|
||||
}
|
||||
|
||||
row_size = ROW_SIZE;
|
||||
if (!psoc_bank->ecc_enabled) {
|
||||
row_size += ROW_ECC_SIZE;
|
||||
memset(ecc_bytes, bank->default_padded_value, ROW_ECC_SIZE);
|
||||
}
|
||||
|
||||
retval = psoc5lp_spc_get_temp(target, 3, temp);
|
||||
if (retval != ERROR_OK) {
|
||||
LOG_ERROR("Unable to read Die temperature");
|
||||
return retval;
|
||||
}
|
||||
LOG_DEBUG("Get_Temp: sign 0x%02" PRIx8 ", magnitude 0x%02" PRIx8,
|
||||
temp[0], temp[1]);
|
||||
|
||||
assert(target_get_working_area_avail(target) == target->working_area_size);
|
||||
retval = target_alloc_working_area(target,
|
||||
target_get_working_area_avail(target) / 2, &code_area);
|
||||
if (retval != ERROR_OK) {
|
||||
LOG_ERROR("Could not allocate working area for program SRAM");
|
||||
return retval;
|
||||
}
|
||||
assert(code_area->address < 0x20000000);
|
||||
|
||||
retval = target_alloc_working_area(target,
|
||||
SPC_OPCODE_LEN + 1 + row_size + 3 + SPC_OPCODE_LEN + 6,
|
||||
&even_row_area);
|
||||
if (retval != ERROR_OK) {
|
||||
LOG_ERROR("Could not allocate working area for even row");
|
||||
goto err_alloc_even;
|
||||
}
|
||||
assert(even_row_area->address >= 0x20000000);
|
||||
|
||||
retval = target_alloc_working_area(target, even_row_area->size,
|
||||
&odd_row_area);
|
||||
if (retval != ERROR_OK) {
|
||||
LOG_ERROR("Could not allocate working area for odd row");
|
||||
goto err_alloc_odd;
|
||||
}
|
||||
assert(odd_row_area->address >= 0x20000000);
|
||||
|
||||
for (array_id = offset / BLOCK_SIZE; byte_count > 0; array_id++) {
|
||||
for (row = (offset / ROW_SIZE) % ROWS_PER_BLOCK;
|
||||
row < ROWS_PER_BLOCK && byte_count > 0; row++) {
|
||||
bool even_row = (row % 2 == 0);
|
||||
struct working_area *data_area = even_row ? even_row_area : odd_row_area;
|
||||
unsigned len = MIN(ROW_SIZE, byte_count);
|
||||
|
||||
LOG_DEBUG("Writing load command for array %u row %u at 0x%08" TARGET_PRIxADDR,
|
||||
array_id, row, data_area->address);
|
||||
|
||||
psoc5lp_spc_write_opcode_buffer(target, buf, SPC_LOAD_ROW);
|
||||
buf[SPC_OPCODE_LEN] = array_id;
|
||||
retval = target_write_buffer(target, data_area->address, 4, buf);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_write;
|
||||
|
||||
retval = target_write_buffer(target,
|
||||
data_area->address + SPC_OPCODE_LEN + 1,
|
||||
len, buffer);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_write;
|
||||
buffer += len;
|
||||
byte_count -= len;
|
||||
offset += len;
|
||||
|
||||
if (len < ROW_SIZE) {
|
||||
uint8_t padding[ROW_SIZE];
|
||||
|
||||
memset(padding, bank->default_padded_value, ROW_SIZE);
|
||||
|
||||
LOG_DEBUG("Padding %d bytes", ROW_SIZE - len);
|
||||
retval = target_write_buffer(target,
|
||||
data_area->address + SPC_OPCODE_LEN + 1 + len,
|
||||
ROW_SIZE - len, padding);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_write;
|
||||
}
|
||||
|
||||
if (!psoc_bank->ecc_enabled) {
|
||||
retval = target_write_buffer(target,
|
||||
data_area->address + SPC_OPCODE_LEN + 1 + ROW_SIZE,
|
||||
sizeof(ecc_bytes), ecc_bytes);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_write;
|
||||
}
|
||||
|
||||
for (i = 0; i < 3; i++)
|
||||
buf[i] = 0x00; /* 3 NOPs for short delay */
|
||||
psoc5lp_spc_write_opcode_buffer(target, buf + 3, SPC_PRG_ROW);
|
||||
buf[3 + SPC_OPCODE_LEN] = array_id;
|
||||
buf[3 + SPC_OPCODE_LEN + 1] = row >> 8;
|
||||
buf[3 + SPC_OPCODE_LEN + 2] = row & 0xff;
|
||||
memcpy(buf + 3 + SPC_OPCODE_LEN + 3, temp, 2);
|
||||
buf[3 + SPC_OPCODE_LEN + 5] = 0x00; /* padding */
|
||||
retval = target_write_buffer(target,
|
||||
data_area->address + SPC_OPCODE_LEN + 1 + row_size,
|
||||
12, buf);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_write;
|
||||
|
||||
retval = target_write_u32(target,
|
||||
even_row ? PHUB_CH0_BASIC_STATUS : PHUB_CH1_BASIC_STATUS,
|
||||
(even_row ? 0 : 1) << 8);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_dma;
|
||||
|
||||
retval = target_write_u32(target,
|
||||
even_row ? PHUB_CH0_BASIC_CFG : PHUB_CH1_BASIC_CFG,
|
||||
PHUB_CHx_BASIC_CFG_WORK_SEP | PHUB_CHx_BASIC_CFG_EN);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_dma;
|
||||
|
||||
retval = target_write_u32(target,
|
||||
even_row ? PHUB_CFGMEM0_CFG0 : PHUB_CFGMEM1_CFG0,
|
||||
PHUB_CFGMEMx_CFG0);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_dma;
|
||||
|
||||
retval = target_write_u32(target,
|
||||
even_row ? PHUB_CFGMEM0_CFG1 : PHUB_CFGMEM1_CFG1,
|
||||
((SPC_CPU_DATA >> 16) << 16) | (data_area->address >> 16));
|
||||
if (retval != ERROR_OK)
|
||||
goto err_dma;
|
||||
|
||||
retval = target_write_u32(target,
|
||||
even_row ? PHUB_TDMEM0_ORIG_TD0 : PHUB_TDMEM1_ORIG_TD0,
|
||||
PHUB_TDMEMx_ORIG_TD0_INC_SRC_ADDR |
|
||||
PHUB_TDMEMx_ORIG_TD0_NEXT_TD_PTR_LAST |
|
||||
((SPC_OPCODE_LEN + 1 + row_size + 3 + SPC_OPCODE_LEN + 5) & 0xfff));
|
||||
if (retval != ERROR_OK)
|
||||
goto err_dma;
|
||||
|
||||
retval = target_write_u32(target,
|
||||
even_row ? PHUB_TDMEM0_ORIG_TD1 : PHUB_TDMEM1_ORIG_TD1,
|
||||
((SPC_CPU_DATA & 0xffff) << 16) | (data_area->address & 0xffff));
|
||||
if (retval != ERROR_OK)
|
||||
goto err_dma;
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_idle(target);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_idle;
|
||||
|
||||
retval = target_write_u32(target,
|
||||
even_row ? PHUB_CH0_ACTION : PHUB_CH1_ACTION,
|
||||
PHUB_CHx_ACTION_CPU_REQ);
|
||||
if (retval != ERROR_OK)
|
||||
goto err_dma_action;
|
||||
}
|
||||
}
|
||||
|
||||
retval = psoc5lp_spc_busy_wait_idle(target);
|
||||
|
||||
err_dma_action:
|
||||
err_idle:
|
||||
err_dma:
|
||||
err_write:
|
||||
target_free_working_area(target, odd_row_area);
|
||||
err_alloc_odd:
|
||||
target_free_working_area(target, even_row_area);
|
||||
err_alloc_even:
|
||||
target_free_working_area(target, code_area);
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
static int psoc5lp_protect_check(struct flash_bank *bank)
|
||||
{
|
||||
struct psoc5lp_flash_bank *psoc_bank = bank->driver_priv;
|
||||
uint8_t row_data[ROW_SIZE];
|
||||
const unsigned protection_bytes_per_sector = ROWS_PER_SECTOR * 2 / 8;
|
||||
unsigned i, j, k, num_sectors;
|
||||
int retval;
|
||||
|
||||
if (bank->target->state != TARGET_HALTED) {
|
||||
LOG_ERROR("Target not halted");
|
||||
return ERROR_TARGET_NOT_HALTED;
|
||||
}
|
||||
|
||||
for (i = 0; i < DIV_ROUND_UP(bank->size, BLOCK_SIZE); i++) {
|
||||
retval = psoc5lp_spc_read_hidden_row(bank->target, i,
|
||||
SPC_ROW_PROTECTION, row_data);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
/* Last flash array may have less rows, but in practice full sectors. */
|
||||
if (i == bank->size / BLOCK_SIZE)
|
||||
num_sectors = (bank->size % BLOCK_SIZE) / SECTOR_SIZE;
|
||||
else
|
||||
num_sectors = SECTORS_PER_BLOCK;
|
||||
|
||||
for (j = 0; j < num_sectors; j++) {
|
||||
int sector_nr = i * SECTORS_PER_BLOCK + j;
|
||||
struct flash_sector *sector = &bank->sectors[sector_nr];
|
||||
struct flash_sector *ecc_sector;
|
||||
|
||||
if (psoc_bank->ecc_enabled)
|
||||
ecc_sector = &bank->sectors[bank->num_sectors + sector_nr];
|
||||
else
|
||||
ecc_sector = &bank->sectors[bank->num_sectors / 2 + sector_nr];
|
||||
|
||||
sector->is_protected = ecc_sector->is_protected = 0;
|
||||
for (k = protection_bytes_per_sector * j;
|
||||
k < protection_bytes_per_sector * (j + 1); k++) {
|
||||
assert(k < protection_bytes_per_sector * SECTORS_PER_BLOCK);
|
||||
LOG_DEBUG("row[%u][%02u] = 0x%02" PRIx8, i, k, row_data[k]);
|
||||
if (row_data[k] != 0x00) {
|
||||
sector->is_protected = ecc_sector->is_protected = 1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
static int psoc5lp_get_info_command(struct flash_bank *bank, char *buf, int buf_size)
|
||||
{
|
||||
struct psoc5lp_flash_bank *psoc_bank = bank->driver_priv;
|
||||
char part_number[PART_NUMBER_LEN];
|
||||
const char *ecc;
|
||||
|
||||
psoc5lp_get_part_number(psoc_bank->device, part_number);
|
||||
ecc = psoc_bank->ecc_enabled ? "ECC enabled" : "ECC disabled";
|
||||
|
||||
snprintf(buf, buf_size, "%s %s", part_number, ecc);
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
static int psoc5lp_probe(struct flash_bank *bank)
|
||||
{
|
||||
struct target *target = bank->target;
|
||||
struct psoc5lp_flash_bank *psoc_bank = bank->driver_priv;
|
||||
uint32_t flash_addr = bank->base;
|
||||
uint8_t nvl[4], temp[2];
|
||||
int i, retval;
|
||||
|
||||
if (target->state != TARGET_HALTED) {
|
||||
LOG_ERROR("Target not halted");
|
||||
return ERROR_TARGET_NOT_HALTED;
|
||||
}
|
||||
|
||||
if (!psoc_bank->device) {
|
||||
retval = psoc5lp_find_device(target, &psoc_bank->device);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
bank->size = psoc_bank->device->flash_kb * 1024;
|
||||
}
|
||||
|
||||
bank->num_sectors = DIV_ROUND_UP(bank->size, SECTOR_SIZE);
|
||||
|
||||
if (!psoc_bank->probed) {
|
||||
retval = psoc5lp_spc_enable_clock(target);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
/* First values read are inaccurate, so do it once now. */
|
||||
retval = psoc5lp_spc_get_temp(target, 3, temp);
|
||||
if (retval != ERROR_OK) {
|
||||
LOG_ERROR("Unable to read Die temperature");
|
||||
return retval;
|
||||
}
|
||||
|
||||
bank->sectors = calloc(bank->num_sectors * 2,
|
||||
sizeof(struct flash_sector));
|
||||
for (i = 0; i < bank->num_sectors; i++) {
|
||||
bank->sectors[i].size = SECTOR_SIZE;
|
||||
bank->sectors[i].offset = flash_addr - bank->base;
|
||||
bank->sectors[i].is_erased = -1;
|
||||
bank->sectors[i].is_protected = -1;
|
||||
|
||||
flash_addr += bank->sectors[i].size;
|
||||
}
|
||||
flash_addr = 0x48000000;
|
||||
for (i = bank->num_sectors; i < bank->num_sectors * 2; i++) {
|
||||
bank->sectors[i].size = ROWS_PER_SECTOR * ROW_ECC_SIZE;
|
||||
bank->sectors[i].offset = flash_addr - bank->base;
|
||||
bank->sectors[i].is_erased = -1;
|
||||
bank->sectors[i].is_protected = -1;
|
||||
|
||||
flash_addr += bank->sectors[i].size;
|
||||
}
|
||||
|
||||
bank->default_padded_value = bank->erased_value = 0x00;
|
||||
|
||||
psoc_bank->probed = true;
|
||||
}
|
||||
|
||||
retval = psoc5lp_spc_read_byte(target, SPC_ARRAY_NVL_USER, 3, &nvl[3]);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
LOG_DEBUG("NVL[%d] = 0x%02" PRIx8, 3, nvl[3]);
|
||||
psoc_bank->ecc_enabled = nvl[3] & NVL_3_ECCEN;
|
||||
|
||||
if (!psoc_bank->ecc_enabled)
|
||||
bank->num_sectors *= 2;
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
static int psoc5lp_auto_probe(struct flash_bank *bank)
|
||||
{
|
||||
return psoc5lp_probe(bank);
|
||||
}
|
||||
|
||||
COMMAND_HANDLER(psoc5lp_handle_mass_erase_command)
|
||||
{
|
||||
struct flash_bank *bank;
|
||||
int retval;
|
||||
|
||||
if (CMD_ARGC < 1)
|
||||
return ERROR_COMMAND_SYNTAX_ERROR;
|
||||
|
||||
retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
retval = psoc5lp_spc_erase_all(bank->target);
|
||||
if (retval == ERROR_OK)
|
||||
command_print(CMD_CTX, "PSoC 5LP erase succeeded");
|
||||
else
|
||||
command_print(CMD_CTX, "PSoC 5LP erase failed");
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
FLASH_BANK_COMMAND_HANDLER(psoc5lp_flash_bank_command)
|
||||
{
|
||||
struct psoc5lp_flash_bank *psoc_bank;
|
||||
|
||||
psoc_bank = malloc(sizeof(struct psoc5lp_flash_bank));
|
||||
if (!psoc_bank)
|
||||
return ERROR_FLASH_OPERATION_FAILED;
|
||||
|
||||
psoc_bank->probed = false;
|
||||
psoc_bank->device = NULL;
|
||||
|
||||
bank->driver_priv = psoc_bank;
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
static const struct command_registration psoc5lp_exec_command_handlers[] = {
|
||||
{
|
||||
.name = "mass_erase",
|
||||
.handler = psoc5lp_handle_mass_erase_command,
|
||||
.mode = COMMAND_EXEC,
|
||||
.usage = "bank_id",
|
||||
.help = "Erase all flash data and ECC/configuration bytes, "
|
||||
"all flash protection rows, "
|
||||
"and all row latches in all flash arrays on the device.",
|
||||
},
|
||||
COMMAND_REGISTRATION_DONE
|
||||
};
|
||||
|
||||
static const struct command_registration psoc5lp_command_handlers[] = {
|
||||
{
|
||||
.name = "psoc5lp",
|
||||
.mode = COMMAND_ANY,
|
||||
.help = "PSoC 5LP flash command group",
|
||||
.usage = "",
|
||||
.chain = psoc5lp_exec_command_handlers,
|
||||
},
|
||||
COMMAND_REGISTRATION_DONE
|
||||
};
|
||||
|
||||
struct flash_driver psoc5lp_flash = {
|
||||
.name = "psoc5lp",
|
||||
.commands = psoc5lp_command_handlers,
|
||||
.flash_bank_command = psoc5lp_flash_bank_command,
|
||||
.info = psoc5lp_get_info_command,
|
||||
.probe = psoc5lp_probe,
|
||||
.auto_probe = psoc5lp_auto_probe,
|
||||
.protect_check = psoc5lp_protect_check,
|
||||
.read = default_flash_read,
|
||||
.erase = psoc5lp_erase,
|
||||
.erase_check = psoc5lp_erase_check,
|
||||
.write = psoc5lp_write,
|
||||
};
|
||||
|
|
@ -28,6 +28,36 @@ dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
|
|||
set _TARGETNAME $_CHIPNAME.cpu
|
||||
target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
|
||||
|
||||
if { [info exists WORKAREASIZE] } {
|
||||
set _WORKAREASIZE $WORKAREASIZE
|
||||
} else {
|
||||
set _WORKAREASIZE 0x2000
|
||||
}
|
||||
|
||||
$_TARGETNAME configure -work-area-phys [expr 0x20000000 - $_WORKAREASIZE / 2] \
|
||||
-work-area-size $_WORKAREASIZE -work-area-backup 0
|
||||
|
||||
source [find mem_helper.tcl]
|
||||
|
||||
$_TARGETNAME configure -event reset-init {
|
||||
# Configure Target Device (PSoC 5LP Device Programming Specification 5.2)
|
||||
|
||||
set PANTHER_DBG_CFG 0x4008000C
|
||||
set PANTHER_DBG_CFG_BYPASS [expr 1 << 1]
|
||||
mmw $PANTHER_DBG_CFG $PANTHER_DBG_CFG_BYPASS 0
|
||||
|
||||
set PM_ACT_CFG0 0x400043A0
|
||||
mww $PM_ACT_CFG0 0xBF
|
||||
|
||||
set FASTCLK_IMO_CR 0x40004200
|
||||
set FASTCLK_IMO_CR_F_RANGE_2 [expr 2 << 0]
|
||||
set FASTCLK_IMO_CR_F_RANGE_MASK [expr 7 << 0]
|
||||
mmw $FASTCLK_IMO_CR $FASTCLK_IMO_CR_F_RANGE_2 $FASTCLK_IMO_CR_F_RANGE_MASK
|
||||
}
|
||||
|
||||
set _FLASHNAME $_CHIPNAME.flash
|
||||
flash bank $_FLASHNAME psoc5lp 0x00000000 0 0 0 $_TARGETNAME
|
||||
|
||||
if {![using_hla]} {
|
||||
cortex_m reset_config sysresetreq
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue