ARM ADIv5: CoreSight ROM decode part number and designer id

The existing arm_adi_v5.c code decodes CoreSight peripherals based
on the part number field.  However, these are specific to a
particular manufacturer (often ARM).  The same part number from
two different manufacturers (distinct designer ids) should not
decode as the same CoreSight peripheral.

The Analog Devices ADSP-SC58x and ADSP-BF70x have peripherals that
overlap with existing OpenOCD decoding.  The part number is the
same as existing OpenOCD decoding, but have a different JEP106 code.

Most, if not all, of the existing part number entries in
arm_adi_v5.c are probably specific to ARM. Change all entries
suspected to be designed by ARM to match only ARM's designer ID.

However, to preserve legacy behavior, existing non-ARM entries are
encoded with a wildcard so that they will behave in the same way as
the existing legacy code.  It is desirable, however, to start
encoding the data with designer codes to avoid such ambiguity.

Revising the code to check both the part number and designer id
seemed to a warrant a const array lookup table instead of a
multi-tiered switch statement.

Also try to sync part identification IDs with relevant ARM docs.

Change-Id: Iac1374e4cfc6f04cebb479c0e3fa9bde527cc4a3
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
[andreas.fritiofson@gmail.com: change JEP106 to designer ID, cleanup]
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3128
Tested-by: jenkins
This commit is contained in:
Peter Lawrence 2015-12-28 22:53:49 +01:00 committed by Andreas Fritiofson
parent 24b88c9e0c
commit 2f131d3c30
1 changed files with 113 additions and 159 deletions

View File

@ -874,6 +874,86 @@ int dap_lookup_cs_component(struct adiv5_ap *ap,
return ERROR_OK;
}
/* The designer identity code is encoded as:
* bits 11:8 : JEP106 Bank (number of continuation codes), only valid when bit 7 is 1.
* bit 7 : Set when bits 6:0 represent a JEP106 ID and cleared when bits 6:0 represent
* a legacy ASCII Identity Code.
* bits 6:0 : JEP106 Identity Code (without parity) or legacy ASCII code according to bit 7.
* JEP106 is a standard available from jedec.org
*/
/* Part number interpretations are from Cortex
* core specs, the CoreSight components TRM
* (ARM DDI 0314H), CoreSight System Design
* Guide (ARM DGI 0012D) and ETM specs; also
* from chip observation (e.g. TI SDTI).
*/
/* The legacy code only used the part number field to identify CoreSight peripherals.
* This meant that the same part number from two different manufacturers looked the same.
* It is desirable for all future additions to identify with both part number and JEP106.
* "ANY_ID" is a wildcard (any JEP106) only to preserve legacy behavior for legacy entries.
*/
#define ANY_ID 0x1000
#define ARM_ID 0x4BB
static const struct {
uint16_t designer_id;
uint16_t part_num;
const char *type;
const char *full;
} dap_partnums[] = {
{ ARM_ID, 0x000, "Cortex-M3 SCS", "(System Control Space)", },
{ ARM_ID, 0x001, "Cortex-M3 ITM", "(Instrumentation Trace Module)", },
{ ARM_ID, 0x002, "Cortex-M3 DWT", "(Data Watchpoint and Trace)", },
{ ARM_ID, 0x003, "Cortex-M3 FBP", "(Flash Patch and Breakpoint)", },
{ ARM_ID, 0x008, "Cortex-M0 SCS", "(System Control Space)", },
{ ARM_ID, 0x00a, "Cortex-M0 DWT", "(Data Watchpoint and Trace)", },
{ ARM_ID, 0x00b, "Cortex-M0 BPU", "(Breakpoint Unit)", },
{ ARM_ID, 0x00c, "Cortex-M4 SCS", "(System Control Space)", },
{ ARM_ID, 0x00d, "CoreSight ETM11", "(Embedded Trace)", },
{ ARM_ID, 0x490, "Cortex-A15 GIC", "(Generic Interrupt Controller)", },
{ ARM_ID, 0x4c7, "Cortex-M7 PPB", "(Private Peripheral Bus ROM Table)", },
{ ARM_ID, 0x906, "CoreSight CTI", "(Cross Trigger)", },
{ ARM_ID, 0x907, "CoreSight ETB", "(Trace Buffer)", },
{ ARM_ID, 0x908, "CoreSight CSTF", "(Trace Funnel)", },
{ ARM_ID, 0x910, "CoreSight ETM9", "(Embedded Trace)", },
{ ARM_ID, 0x912, "CoreSight TPIU", "(Trace Port Interface Unit)", },
{ ARM_ID, 0x913, "CoreSight ITM", "(Instrumentation Trace Macrocell)", },
{ ARM_ID, 0x914, "CoreSight SWO", "(Single Wire Output)", },
{ ARM_ID, 0x917, "CoreSight HTM", "(AHB Trace Macrocell)", },
{ ARM_ID, 0x920, "CoreSight ETM11", "(Embedded Trace)", },
{ ARM_ID, 0x921, "Cortex-A8 ETM", "(Embedded Trace)", },
{ ARM_ID, 0x922, "Cortex-A8 CTI", "(Cross Trigger)", },
{ ARM_ID, 0x923, "Cortex-M3 TPIU", "(Trace Port Interface Unit)", },
{ ARM_ID, 0x924, "Cortex-M3 ETM", "(Embedded Trace)", },
{ ARM_ID, 0x925, "Cortex-M4 ETM", "(Embedded Trace)", },
{ ARM_ID, 0x930, "Cortex-R4 ETM", "(Embedded Trace)", },
{ ARM_ID, 0x941, "CoreSight TPIU-Lite", "(Trace Port Interface Unit)", },
{ ARM_ID, 0x950, "CoreSight Component", "(unidentified Cortex-A9 component)", },
{ ARM_ID, 0x955, "CoreSight Component", "(unidentified Cortex-A5 component)", },
{ ARM_ID, 0x95f, "Cortex-A15 PTM", "(Program Trace Macrocell)", },
{ ARM_ID, 0x961, "CoreSight TMC", "(Trace Memory Controller)", },
{ ARM_ID, 0x962, "CoreSight STM", "(System Trace Macrocell)", },
{ ARM_ID, 0x9a0, "CoreSight PMU", "(Performance Monitoring Unit)", },
{ ARM_ID, 0x9a1, "Cortex-M4 TPIU", "(Trace Port Interface Unit)", },
{ ARM_ID, 0x9a5, "Cortex-A5 ETM", "(Embedded Trace)", },
{ ARM_ID, 0x9a7, "Cortex-A7 PMU", "(Performance Monitor Unit)", },
{ ARM_ID, 0x9af, "Cortex-A15 PMU", "(Performance Monitor Unit)", },
{ ARM_ID, 0xc05, "Cortex-A5 Debug", "(Debug Unit)", },
{ ARM_ID, 0xc07, "Cortex-A7 Debug", "(Debug Unit)", },
{ ARM_ID, 0xc08, "Cortex-A8 Debug", "(Debug Unit)", },
{ ARM_ID, 0xc09, "Cortex-A9 Debug", "(Debug Unit)", },
{ ARM_ID, 0xc0f, "Cortex-A15 Debug", "(Debug Unit)", },
{ ARM_ID, 0xc14, "Cortex-R4 Debug", "(Debug Unit)", },
{ 0x0E5, 0x000, "SHARC+/Blackfin+", "", },
/* legacy comment: 0x113: what? */
{ ANY_ID, 0x120, "TI SDTI", "(System Debug Trace Interface)", }, /* from OMAP3 memmap */
{ ANY_ID, 0x343, "TI DAPCTL", "", }, /* from OMAP3 memmap */
};
static int dap_rom_display(struct command_context *cmd_ctx,
struct adiv5_ap *ap, uint32_t dbgbase, int depth)
{
@ -941,7 +1021,7 @@ static int dap_rom_display(struct command_context *cmd_ctx,
uint32_t c_cid0, c_cid1, c_cid2, c_cid3;
uint32_t c_pid0, c_pid1, c_pid2, c_pid3, c_pid4;
uint32_t component_base;
uint32_t part_num;
uint16_t part_num, designer_id;
const char *type, *full;
component_base = (dbgbase & 0xFFFFF000) + (romentry & 0xFFFFF000);
@ -1164,168 +1244,42 @@ static int dap_rom_display(struct command_context *cmd_ctx,
(int)c_pid4, (int)c_pid3, (int)c_pid2,
(int)c_pid1, (int)c_pid0);
/* Part number interpretations are from Cortex
* core specs, the CoreSight components TRM
* (ARM DDI 0314H), CoreSight System Design
* Guide (ARM DGI 0012D) and ETM specs; also
* from chip observation (e.g. TI SDTI).
*/
part_num = (c_pid0 & 0xff);
part_num |= (c_pid1 & 0x0f) << 8;
switch (part_num) {
case 0x000:
type = "Cortex-M3 NVIC";
full = "(Interrupt Controller)";
break;
case 0x001:
type = "Cortex-M3 ITM";
full = "(Instrumentation Trace Module)";
break;
case 0x002:
type = "Cortex-M3 DWT";
full = "(Data Watchpoint and Trace)";
break;
case 0x003:
type = "Cortex-M3 FBP";
full = "(Flash Patch and Breakpoint)";
break;
case 0x008:
type = "Cortex-M0 SCS";
full = "(System Control Space)";
break;
case 0x00a:
type = "Cortex-M0 DWT";
full = "(Data Watchpoint and Trace)";
break;
case 0x00b:
type = "Cortex-M0 BPU";
full = "(Breakpoint Unit)";
break;
case 0x00c:
type = "Cortex-M4 SCS";
full = "(System Control Space)";
break;
case 0x00d:
type = "CoreSight ETM11";
full = "(Embedded Trace)";
break;
/* case 0x113: what? */
case 0x120: /* from OMAP3 memmap */
type = "TI SDTI";
full = "(System Debug Trace Interface)";
break;
case 0x343: /* from OMAP3 memmap */
type = "TI DAPCTL";
full = "";
break;
case 0x906:
type = "Coresight CTI";
full = "(Cross Trigger)";
break;
case 0x907:
type = "Coresight ETB";
full = "(Trace Buffer)";
break;
case 0x908:
type = "Coresight CSTF";
full = "(Trace Funnel)";
break;
case 0x910:
type = "CoreSight ETM9";
full = "(Embedded Trace)";
break;
case 0x912:
type = "Coresight TPIU";
full = "(Trace Port Interface Unit)";
break;
case 0x913:
type = "Coresight ITM";
full = "(Instrumentation Trace Macrocell)";
break;
case 0x914:
type = "Coresight SWO";
full = "(Single Wire Output)";
break;
case 0x917:
type = "Coresight HTM";
full = "(AHB Trace Macrocell)";
break;
case 0x920:
type = "CoreSight ETM11";
full = "(Embedded Trace)";
break;
case 0x921:
type = "Cortex-A8 ETM";
full = "(Embedded Trace)";
break;
case 0x922:
type = "Cortex-A8 CTI";
full = "(Cross Trigger)";
break;
case 0x923:
type = "Cortex-M3 TPIU";
full = "(Trace Port Interface Unit)";
break;
case 0x924:
type = "Cortex-M3 ETM";
full = "(Embedded Trace)";
break;
case 0x925:
type = "Cortex-M4 ETM";
full = "(Embedded Trace)";
break;
case 0x930:
type = "Cortex-R4 ETM";
full = "(Embedded Trace)";
break;
case 0x950:
type = "CoreSight Component";
full = "(unidentified Cortex-A9 component)";
break;
case 0x961:
type = "CoreSight TMC";
full = "(Trace Memory Controller)";
break;
case 0x962:
type = "CoreSight STM";
full = "(System Trace Macrocell)";
break;
case 0x9a0:
type = "CoreSight PMU";
full = "(Performance Monitoring Unit)";
break;
case 0x9a1:
type = "Cortex-M4 TPUI";
full = "(Trace Port Interface Unit)";
break;
case 0x9a5:
type = "Cortex-A5 ETM";
full = "(Embedded Trace)";
break;
case 0xc05:
type = "Cortex-A5 Debug";
full = "(Debug Unit)";
break;
case 0xc08:
type = "Cortex-A8 Debug";
full = "(Debug Unit)";
break;
case 0xc09:
type = "Cortex-A9 Debug";
full = "(Debug Unit)";
break;
case 0x4af:
type = "Cortex-A15 Debug";
full = "(Debug Unit)";
break;
default:
LOG_DEBUG("Unrecognized Part number 0x%" PRIx32, part_num);
type = "-*- unrecognized -*-";
full = "";
designer_id = (c_pid1 & 0xf0) >> 4;
designer_id |= (c_pid2 & 0x0f) << 4;
designer_id |= (c_pid4 & 0x0f) << 8;
if ((designer_id & 0x80) == 0) {
/* Legacy ASCII ID, clear invalid bits */
designer_id &= 0x7f;
}
/* default values to be overwritten upon finding a match */
type = NULL;
full = "";
/* search dap_partnums[] array for a match */
unsigned entry;
for (entry = 0; entry < ARRAY_SIZE(dap_partnums); entry++) {
if ((dap_partnums[entry].designer_id != designer_id) && (dap_partnums[entry].designer_id != ANY_ID))
continue;
if (dap_partnums[entry].part_num != part_num)
continue;
type = dap_partnums[entry].type;
full = dap_partnums[entry].full;
break;
}
command_print(cmd_ctx, "\t\tPart is %s %s",
type, full);
if (type) {
command_print(cmd_ctx, "\t\tPart is %s %s",
type, full);
} else {
command_print(cmd_ctx, "\t\tUnrecognized (Part 0x%" PRIx16 ", designer 0x%" PRIx16 ")",
part_num, designer_id);
}
/* ROM Table? */
if (((c_cid1 >> 4) & 0x0f) == 1) {