doc: Fix sort order of flash drivers
fm3, nrf51, mdr, sim3x were at the end of the section rather than inserted alphabetically. Fix this before adding further drivers. Change-Id: Id23e04749cdd3b25d7503ec00fac554742d48c77 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3019 Tested-by: jenkins Reviewed-by: Karl Palsson <karlp@tweak.net.au> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Andreas Färber
Freddie Chopin
parent
492a4ac226
commit
3084de185c
166
doc/openocd.texi
166
doc/openocd.texi
|
|
@ -5127,6 +5127,19 @@ flash bank $_FLASHNAME efm32 0 0 0 0 $_TARGETNAME
|
|||
supported.}
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} fm3
|
||||
All members of the FM3 microcontroller family from Fujitsu
|
||||
include internal flash and use ARM Cortex M3 cores.
|
||||
The @var{fm3} driver uses the @var{target} parameter to select the
|
||||
correct bank config, it can currently be one of the following:
|
||||
@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu},
|
||||
@code{mb9bfxx4.cpu}, @code{mb9bfxx5.cpu} or @code{mb9bfxx6.cpu}.
|
||||
|
||||
@example
|
||||
flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
|
||||
@end example
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} lpc2000
|
||||
This is the driver to support internal flash of all members of the
|
||||
LPC11(x)00 and LPC1300 microcontroller families and most members of
|
||||
|
|
@ -5317,6 +5330,53 @@ lpc2900 secure_jtag 0
|
|||
@end deffn
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} mdr
|
||||
This drivers handles the integrated NOR flash on Milandr Cortex-M
|
||||
based controllers. A known limitation is that the Info memory can't be
|
||||
read or verified as it's not memory mapped.
|
||||
|
||||
@example
|
||||
flash bank <name> mdr <base> <size> \
|
||||
0 0 <target#> @var{type} @var{page_count} @var{sec_count}
|
||||
@end example
|
||||
|
||||
@itemize @bullet
|
||||
@item @var{type} - 0 for main memory, 1 for info memory
|
||||
@item @var{page_count} - total number of pages
|
||||
@item @var{sec_count} - number of sector per page count
|
||||
@end itemize
|
||||
|
||||
Example usage:
|
||||
@example
|
||||
if @{ [info exists IMEMORY] && [string equal $IMEMORY true] @} @{
|
||||
flash bank $@{_CHIPNAME@}_info.flash mdr 0x00000000 0x01000 \
|
||||
0 0 $_TARGETNAME 1 1 4
|
||||
@} else @{
|
||||
flash bank $_CHIPNAME.flash mdr 0x00000000 0x20000 \
|
||||
0 0 $_TARGETNAME 0 32 4
|
||||
@}
|
||||
@end example
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} nrf51
|
||||
All members of the nRF51 microcontroller families from Nordic Semiconductor
|
||||
include internal flash and use ARM Cortex-M0 core.
|
||||
|
||||
@example
|
||||
flash bank $_FLASHNAME nrf51 0 0x00000000 0 0 $_TARGETNAME
|
||||
@end example
|
||||
|
||||
Some nrf51-specific commands are defined:
|
||||
|
||||
@deffn Command {nrf51 mass_erase}
|
||||
Erases the contents of the code memory and user information
|
||||
configuration registers as well. It must be noted that this command
|
||||
works only for chips that do not have factory pre-programmed region 0
|
||||
code.
|
||||
@end deffn
|
||||
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} ocl
|
||||
This driver is an implementation of the ``on chip flash loader''
|
||||
protocol proposed by Pavel Chromy.
|
||||
|
|
@ -5389,6 +5449,29 @@ The @var{num} parameter is a value shown by @command{flash banks}.
|
|||
@end deffn
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} sim3x
|
||||
All members of the SiM3 microcontroller family from Silicon Laboratories
|
||||
include internal flash and use ARM Cortex M3 cores. It supports both JTAG
|
||||
and SWD interface.
|
||||
The @var{sim3x} driver tries to probe the device to auto detect the MCU.
|
||||
If this failes, it will use the @var{size} parameter as the size of flash bank.
|
||||
|
||||
@example
|
||||
flash bank $_FLASHNAME sim3x 0 $_CPUROMSIZE 0 0 $_TARGETNAME
|
||||
@end example
|
||||
|
||||
There are 2 commands defined in the @var{sim3x} driver:
|
||||
|
||||
@deffn Command {sim3x mass_erase}
|
||||
Erases the complete flash. This is used to unlock the flash.
|
||||
And this command is only possible when using the SWD interface.
|
||||
@end deffn
|
||||
|
||||
@deffn Command {sim3x lock}
|
||||
Lock the flash. To unlock use the @command{sim3x mass_erase} command.
|
||||
@end deffn
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} stellaris
|
||||
All members of the Stellaris LM3Sxxx, LM4x and Tiva C microcontroller
|
||||
families from Texas Instruments include internal flash. The driver
|
||||
|
|
@ -5681,89 +5764,6 @@ the flash clock.
|
|||
@end deffn
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} fm3
|
||||
All members of the FM3 microcontroller family from Fujitsu
|
||||
include internal flash and use ARM Cortex M3 cores.
|
||||
The @var{fm3} driver uses the @var{target} parameter to select the
|
||||
correct bank config, it can currently be one of the following:
|
||||
@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu},
|
||||
@code{mb9bfxx4.cpu}, @code{mb9bfxx5.cpu} or @code{mb9bfxx6.cpu}.
|
||||
|
||||
@example
|
||||
flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
|
||||
@end example
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} sim3x
|
||||
All members of the SiM3 microcontroller family from Silicon Laboratories
|
||||
include internal flash and use ARM Cortex M3 cores. It supports both JTAG
|
||||
and SWD interface.
|
||||
The @var{sim3x} driver tries to probe the device to auto detect the MCU.
|
||||
If this failes, it will use the @var{size} parameter as the size of flash bank.
|
||||
|
||||
@example
|
||||
flash bank $_FLASHNAME sim3x 0 $_CPUROMSIZE 0 0 $_TARGETNAME
|
||||
@end example
|
||||
|
||||
There are 2 commands defined in the @var{sim3x} driver:
|
||||
|
||||
@deffn Command {sim3x mass_erase}
|
||||
Erases the complete flash. This is used to unlock the flash.
|
||||
And this command is only possible when using the SWD interface.
|
||||
@end deffn
|
||||
|
||||
@deffn Command {sim3x lock}
|
||||
Lock the flash. To unlock use the @command{sim3x mass_erase} command.
|
||||
@end deffn
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} nrf51
|
||||
All members of the nRF51 microcontroller families from Nordic Semiconductor
|
||||
include internal flash and use ARM Cortex-M0 core.
|
||||
|
||||
@example
|
||||
flash bank $_FLASHNAME nrf51 0 0x00000000 0 0 $_TARGETNAME
|
||||
@end example
|
||||
|
||||
Some nrf51-specific commands are defined:
|
||||
|
||||
@deffn Command {nrf51 mass_erase}
|
||||
Erases the contents of the code memory and user information
|
||||
configuration registers as well. It must be noted that this command
|
||||
works only for chips that do not have factory pre-programmed region 0
|
||||
code.
|
||||
@end deffn
|
||||
|
||||
@end deffn
|
||||
|
||||
@deffn {Flash Driver} mdr
|
||||
This drivers handles the integrated NOR flash on Milandr Cortex-M
|
||||
based controllers. A known limitation is that the Info memory can't be
|
||||
read or verified as it's not memory mapped.
|
||||
|
||||
@example
|
||||
flash bank <name> mdr <base> <size> \
|
||||
0 0 <target#> @var{type} @var{page_count} @var{sec_count}
|
||||
@end example
|
||||
|
||||
@itemize @bullet
|
||||
@item @var{type} - 0 for main memory, 1 for info memory
|
||||
@item @var{page_count} - total number of pages
|
||||
@item @var{sec_count} - number of sector per page count
|
||||
@end itemize
|
||||
|
||||
Example usage:
|
||||
@example
|
||||
if @{ [info exists IMEMORY] && [string equal $IMEMORY true] @} @{
|
||||
flash bank $@{_CHIPNAME@}_info.flash mdr 0x00000000 0x01000 \
|
||||
0 0 $_TARGETNAME 1 1 4
|
||||
@} else @{
|
||||
flash bank $_CHIPNAME.flash mdr 0x00000000 0x20000 \
|
||||
0 0 $_TARGETNAME 0 32 4
|
||||
@}
|
||||
@end example
|
||||
@end deffn
|
||||
|
||||
@section NAND Flash Commands
|
||||
@cindex NAND
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue