David Brownell <david-b@pacbell.net>:

Initial support for disassembling Thumb2 code.  This works only for
Cortex-M3 cores so far.  Eventually other cores will also need Thumb2
support ... but they don't yet support any kind of disassembly.

 - Update the 16-bit Thumb decoder:
 
     * Understand CPS, REV*, SETEND, {U,S}XT{B,H} opcodes added
       by ARMv6.  (It already seems to treat CPY as MOV.)

     * Understand CB, CBNZ, WFI, IT, and other opcodes added by
       in Thumb2.

 - A new Thumb2 instruction decode routine is provided.
 
     * This has a different signature:  pass the target, not the
       instruction, so it can fetch a second halfword when needed.  
       The instruction size is likewise returned to the caller.

     * 32-bit instructions are recognized but not yet decoded.
   
 - Start using the current "UAL" syntax in some cases.  "SWI" is
   renamed as "SVC"; "LDMIA" as "LDM"; "STMIA" as "STM".

 - Define a new "cortex_m3 disassemble addr count" command to give
   access to this disassembly.

Sanity checked against "objdump -d" output; a bunch of the new
instructions checked out fine.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2530 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
zwelch 2009-07-15 23:39:37 +00:00
parent 2ff59c9aaf
commit 309870e414
4 changed files with 300 additions and 17 deletions

View File

@ -5003,6 +5003,11 @@ If @var{value} is defined, first assigns that.
@subsection Cortex-M3 specific commands
@cindex Cortex-M3
@deffn Command {cortex_m3 disassemble} address count
@cindex disassemble
Disassembles @var{count} Thumb2 instructions starting at @var{address}.
@end deffn
@deffn Command {cortex_m3 maskisr} (@option{on}|@option{off})
Control masking (disabling) interrupts during target step/resume.
@end deffn

View File

@ -21,6 +21,7 @@
#include "config.h"
#endif
#include "target.h"
#include "arm_disassembler.h"
#include "log.h"
@ -63,7 +64,9 @@ int evaluate_swi(uint32_t opcode, uint32_t address, arm_instruction_t *instructi
{
instruction->type = ARM_SWI;
snprintf(instruction->text, 128, "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tSWI 0x%6.6" PRIx32 "", address, opcode, (opcode & 0xffffff));
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tSVC %#6.6" PRIx32,
address, opcode, (opcode & 0xffffff));
return ERROR_OK;
}
@ -614,7 +617,8 @@ int evaluate_ldm_stm(uint32_t opcode, uint32_t address, arm_instruction_t *instr
if (U)
{
instruction->info.load_store_multiple.addressing_mode = 0;
addressing_mode = "IA";
/* "IA" is the default in UAL syntax */
addressing_mode = "";
}
else
{
@ -1180,6 +1184,7 @@ int arm_evaluate_opcode(uint32_t opcode, uint32_t address, arm_instruction_t *in
/* clear fields, to avoid confusion */
memset(instruction, 0, sizeof(arm_instruction_t));
instruction->opcode = opcode;
instruction->instruction_size = 4;
/* catch opcodes with condition field [31:28] = b1111 */
if ((opcode & 0xf0000000) == 0xf0000000)
@ -1356,7 +1361,11 @@ int evaluate_b_bl_blx_thumb(uint16_t opcode, uint32_t address, arm_instruction_t
mnemonic = "BL";
break;
}
/* TODO: deals correctly with dual opcodes BL/BLX ... */
/* TODO: deal correctly with dual opcode (prefixed) BL/BLX;
* these are effectively 32-bit instructions even in Thumb1.
* Might be simplest to always use the Thumb2 decoder.
*/
snprintf(instruction->text, 128, "0x%8.8" PRIx32 "\t0x%4.4x\t%s 0x%8.8" PRIx32 , address, opcode,mnemonic, target_address);
@ -1887,12 +1896,12 @@ int evaluate_load_store_multiple_thumb(uint16_t opcode, uint32_t address, arm_in
if (L)
{
instruction->type = ARM_LDM;
mnemonic = "LDMIA";
mnemonic = "LDM";
}
else
{
instruction->type = ARM_STM;
mnemonic = "STMIA";
mnemonic = "STM";
}
snprintf(ptr_name,7,"r%i!, ",Rn);
}
@ -1945,7 +1954,9 @@ int evaluate_cond_branch_thumb(uint16_t opcode, uint32_t address, arm_instructio
if (cond == 0xf)
{
instruction->type = ARM_SWI;
snprintf(instruction->text, 128, "0x%8.8" PRIx32 "\t0x%4.4x\tSWI 0x%02" PRIx32 , address, opcode, offset);
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%4.4x\tSVC 0x%02" PRIx32,
address, opcode, offset);
return ERROR_OK;
}
else if (cond == 0xe)
@ -1971,11 +1982,148 @@ int evaluate_cond_branch_thumb(uint16_t opcode, uint32_t address, arm_instructio
return ERROR_OK;
}
static int evaluate_cb_thumb(uint16_t opcode, uint32_t address,
arm_instruction_t *instruction)
{
unsigned offset;
/* added in Thumb2 */
offset = (opcode >> 3) & 0x1f;
offset |= (opcode & 0x0200) >> 4;
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%4.4x\tCB%sZ r%d, %#8.8" PRIx32,
address, opcode,
(opcode & 0x0800) ? "N" : "",
opcode & 0x7, address + 4 + (offset << 1));
return ERROR_OK;
}
static int evaluate_extend_thumb(uint16_t opcode, uint32_t address,
arm_instruction_t *instruction)
{
/* added in ARMv6 */
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%4.4x\t%cXT%c r%d, r%d",
address, opcode,
(opcode & 0x0080) ? 'U' : 'S',
(opcode & 0x0040) ? 'B' : 'H',
opcode & 0x7, (opcode >> 3) & 0x7);
return ERROR_OK;
}
static int evaluate_cps_thumb(uint16_t opcode, uint32_t address,
arm_instruction_t *instruction)
{
/* added in ARMv6 */
if ((opcode & 0x0ff0) == 0x0650)
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%4.4x\tSETEND %s",
address, opcode,
(opcode & 0x80) ? "BE" : "LE");
else /* ASSUME (opcode & 0x0fe0) == 0x0660 */
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%4.4x\tCPSI%c %s%s%s",
address, opcode,
(opcode & 0x0010) ? 'D' : 'E',
(opcode & 0x0004) ? "A" : "",
(opcode & 0x0002) ? "I" : "",
(opcode & 0x0001) ? "F" : "");
return ERROR_OK;
}
static int evaluate_byterev_thumb(uint16_t opcode, uint32_t address,
arm_instruction_t *instruction)
{
char *suffix;
/* added in ARMv6 */
switch (opcode & 0x00c0) {
case 0:
suffix = "";
break;
case 1:
suffix = "16";
break;
default:
suffix = "SH";
break;
}
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%4.4x\tREV%s r%d, r%d",
address, opcode, suffix,
opcode & 0x7, (opcode >> 3) & 0x7);
return ERROR_OK;
}
static int evaluate_hint_thumb(uint16_t opcode, uint32_t address,
arm_instruction_t *instruction)
{
char *hint;
switch ((opcode >> 4) & 0x0f) {
case 0:
hint = "NOP";
break;
case 1:
hint = "YIELD";
break;
case 2:
hint = "WFE";
break;
case 3:
hint = "WFI";
break;
case 4:
hint = "SEV";
break;
default:
hint = "HINT (UNRECOGNIZED)";
break;
}
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%4.4x\t%s",
address, opcode, hint);
return ERROR_OK;
}
static int evaluate_ifthen_thumb(uint16_t opcode, uint32_t address,
arm_instruction_t *instruction)
{
unsigned cond = (opcode >> 4) & 0x0f;
char *x = "", *y = "", *z = "";
if (opcode & 0x01)
z = (opcode & 0x02) ? "T" : "E";
if (opcode & 0x03)
y = (opcode & 0x04) ? "T" : "E";
if (opcode & 0x07)
x = (opcode & 0x08) ? "T" : "E";
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%4.4x\tIT%s%s%s %s",
address, opcode,
x, y, z, arm_condition_strings[cond]);
/* NOTE: strictly speaking, the next 1-4 instructions should
* now be displayed with the relevant conditional suffix...
*/
return ERROR_OK;
}
int thumb_evaluate_opcode(uint16_t opcode, uint32_t address, arm_instruction_t *instruction)
{
/* clear fields, to avoid confusion */
memset(instruction, 0, sizeof(arm_instruction_t));
instruction->opcode = opcode;
instruction->instruction_size = 2;
if ((opcode & 0xe000) == 0x0000)
{
@ -2033,18 +2181,44 @@ int thumb_evaluate_opcode(uint16_t opcode, uint32_t address, arm_instruction_t *
/* Misc */
if ((opcode & 0xf000) == 0xb000)
{
if ((opcode & 0x0f00) == 0x0000)
switch ((opcode >> 8) & 0x0f) {
case 0x0:
return evaluate_adjust_stack_thumb(opcode, address, instruction);
else if ((opcode & 0x0f00) == 0x0e00)
case 0x1:
case 0x3:
case 0x9:
case 0xb:
return evaluate_cb_thumb(opcode, address, instruction);
case 0x2:
return evaluate_extend_thumb(opcode, address, instruction);
case 0x4:
case 0x5:
case 0xc:
case 0xd:
return evaluate_load_store_multiple_thumb(opcode, address,
instruction);
case 0x6:
return evaluate_cps_thumb(opcode, address, instruction);
case 0xa:
if ((opcode & 0x00c0) == 0x0080)
break;
return evaluate_byterev_thumb(opcode, address, instruction);
case 0xe:
return evaluate_breakpoint_thumb(opcode, address, instruction);
else if ((opcode & 0x0600) == 0x0400) /* push pop */
return evaluate_load_store_multiple_thumb(opcode, address, instruction);
case 0xf:
if (opcode & 0x000f)
return evaluate_ifthen_thumb(opcode, address,
instruction);
else
{
instruction->type = ARM_UNDEFINED_INSTRUCTION;
snprintf(instruction->text, 128, "0x%8.8" PRIx32 "\t0x%4.4x\tUNDEFINED INSTRUCTION", address, opcode);
return ERROR_OK;
return evaluate_hint_thumb(opcode, address,
instruction);
}
instruction->type = ARM_UNDEFINED_INSTRUCTION;
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%4.4x\tUNDEFINED INSTRUCTION",
address, opcode);
return ERROR_OK;
}
/* Load/Store multiple */
@ -2078,6 +2252,56 @@ int thumb_evaluate_opcode(uint16_t opcode, uint32_t address, arm_instruction_t *
return -1;
}
/*
* REVISIT for Thumb2 instructions, instruction->type and friends aren't
* always set. That means eventual arm_simulate_step() support for Thumb2
* will need work in this area.
*/
int thumb2_opcode(target_t *target, uint32_t address, arm_instruction_t *instruction)
{
int retval;
uint16_t op;
uint32_t opcode;
/* clear low bit ... it's set on function pointers */
address &= ~1;
/* clear fields, to avoid confusion */
memset(instruction, 0, sizeof(arm_instruction_t));
/* read first halfword, see if this is the only one */
retval = target_read_u16(target, address, &op);
if (retval != ERROR_OK)
return retval;
switch (op & 0xf800) {
case 0xf800:
case 0xf000:
case 0xe800:
/* 32-bit instructions */
instruction->instruction_size = 4;
opcode = op << 16;
retval = target_read_u16(target, address + 2, &op);
if (retval != ERROR_OK)
return retval;
opcode |= op;
instruction->opcode = opcode;
break;
default:
/* 16-bit: Thumb1 + IT + CBZ/CBNZ + ... */
return thumb_evaluate_opcode(op, address, instruction);
}
/* FIXME decode the 32-bit instructions */
LOG_DEBUG("Can't decode 32-bit Thumb2 yet (opcode=%08x)", opcode);
snprintf(instruction->text, 128,
"0x%8.8" PRIx32 "\t0x%8.8x\t... 32-bit Thumb2 ...",
address, opcode);
return ERROR_OK;
}
int arm_access_size(arm_instruction_t *instruction)
{
if ((instruction->type == ARM_LDRB)

View File

@ -185,6 +185,9 @@ typedef struct arm_instruction_s
char text[128];
uint32_t opcode;
/* return value ... Thumb-2 sizes vary */
unsigned instruction_size;
union {
arm_b_bl_bx_blx_instr_t b_bl_bx_blx;
arm_data_proc_instr_t data_proc;
@ -196,6 +199,8 @@ typedef struct arm_instruction_s
extern int arm_evaluate_opcode(uint32_t opcode, uint32_t address, arm_instruction_t *instruction);
extern int thumb_evaluate_opcode(uint16_t opcode, uint32_t address, arm_instruction_t *instruction);
extern int thumb2_opcode(target_t *target, uint32_t address,
arm_instruction_t *instruction);
extern int arm_access_size(arm_instruction_t *instruction);
#define COND(opcode) (arm_condition_strings[(opcode & 0xf0000000) >> 28])

View File

@ -34,6 +34,7 @@
#include "cortex_m3.h"
#include "target_request.h"
#include "target_type.h"
#include "arm_disassembler.h"
/* cli handling */
@ -1646,6 +1647,47 @@ int cortex_m3_target_create(struct target_s *target, Jim_Interp *interp)
return ERROR_OK;
}
/*
* REVISIT Thumb2 disassembly should work for all ARMv7 cores, as well
* as at least ARM-1156T2. The interesting thing about Cortex-M is
* that *only* Thumb2 disassembly matters. There are also some small
* additions to Thumb2 that are specific to ARMv7-M.
*/
static int
handle_cortex_m3_disassemble_command(struct command_context_s *cmd_ctx,
char *cmd, char **args, int argc)
{
int retval = ERROR_OK;
target_t *target = get_current_target(cmd_ctx);
uint32_t address;
unsigned long count;
arm_instruction_t cur_instruction;
if (argc != 2) {
command_print(cmd_ctx,
"usage: cortex_m3 disassemble <address> <count>");
return ERROR_OK;
}
errno = 0;
address = strtoul(args[0], NULL, 0);
if (errno)
return ERROR_FAIL;
count = strtoul(args[1], NULL, 0);
if (errno)
return ERROR_FAIL;
while (count--) {
retval = thumb2_opcode(target, address, &cur_instruction);
if (retval != ERROR_OK)
return retval;
command_print(cmd_ctx, "%s", cur_instruction.text);
address += cur_instruction.instruction_size;
}
return ERROR_OK;
}
int cortex_m3_register_commands(struct command_context_s *cmd_ctx)
{
int retval;
@ -1653,8 +1695,15 @@ int cortex_m3_register_commands(struct command_context_s *cmd_ctx)
retval = armv7m_register_commands(cmd_ctx);
cortex_m3_cmd = register_command(cmd_ctx, NULL, "cortex_m3", NULL, COMMAND_ANY, "cortex_m3 specific commands");
register_command(cmd_ctx, cortex_m3_cmd, "maskisr", handle_cortex_m3_mask_interrupts_command, COMMAND_EXEC, "mask cortex_m3 interrupts ['on'|'off']");
cortex_m3_cmd = register_command(cmd_ctx, NULL, "cortex_m3",
NULL, COMMAND_ANY, "cortex_m3 specific commands");
register_command(cmd_ctx, cortex_m3_cmd, "disassemble",
handle_cortex_m3_disassemble_command, COMMAND_EXEC,
"disassemble Thumb2 instructions <address> <count>");
register_command(cmd_ctx, cortex_m3_cmd, "maskisr",
handle_cortex_m3_mask_interrupts_command, COMMAND_EXEC,
"mask cortex_m3 interrupts ['on'|'off']");
return retval;
}