imi415/openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Remove annoying EOL whitespace (again, sigh).

Browse Source 
git-svn-id: svn://svn.berlios.de/openocd/trunk@2781 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
dbrownell 2009-09-30 23:02:15 +00:00
parent aaf1daa056
commit 32599fab1a
7 changed files with 69 additions and 69 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
tcl/board/telo.cfg
View File

@ -11,7 +11,7 @@ source [find c100helper.tcl]
# Note that libftd2xx.so tries to assert srst # Note that libftd2xx.so tries to assert srst
# which break this script # which break this script
# use libftdi.so library instead with this script # use libftdi.so library instead with this script
# make the reset asserted to # make the reset asserted to
# allow RC circuit to discharge for: [ms] # allow RC circuit to discharge for: [ms]
jtag_nsrst_assert_width 100 jtag_nsrst_assert_width 100
jtag_ntrst_assert_width 100 jtag_ntrst_assert_width 100
@ -39,7 +39,7 @@ $_TARGETNAME configure -event reset-deassert-post {
# Force target into ARM state. # Force target into ARM state.
# soft_reset_halt # not implemented on ARM11 # soft_reset_halt # not implemented on ARM11
puts "Detected SRSRT asserted on C100.CPU" puts "Detected SRSRT asserted on C100.CPU"
} }
$_TARGETNAME configure -event reset-assert-post { $_TARGETNAME configure -event reset-assert-post {
@ -47,7 +47,7 @@ $_TARGETNAME configure -event reset-assert-post {
#sleep 10 #sleep 10
} }
proc power_restore {} { puts "Sensed power restore. No action." } proc power_restore {} { puts "Sensed power restore. No action." }
proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." } proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." }

4
tcl/board/topas910.cfg
View File

@ -53,7 +53,7 @@ proc topas910_init { } {
# // # //
# // Configure SDRAM type parameter # // Configure SDRAM type parameter
# _DMC_MEMORY_CFG = 0x00008011; # _DMC_MEMORY_CFG = 0x00008011;
# _DMC_USER_CONFIG = 0x00000011; # _DMC_USER_CONFIG = 0x00000011;
# // 32 bit memory interface # // 32 bit memory interface
# #
# #
@ -101,7 +101,7 @@ proc topas910_init { } {
sleep 10 sleep 10
# jtag_speed 10000 # jtag_speed 10000
# remap off in case of IROM boot # remap off in case of IROM boot
mww 0xf0000004 0x00000001 mww 0xf0000004 0x00000001
} }

4
tcl/board/topasa900.cfg
View File

@ -1,4 +1,4 @@
# Thanks to Pieter Conradie for this script! # Thanks to Pieter Conradie for this script!
# Target: Toshiba TOPAS900 -- TMPA900 Starterkit # Target: Toshiba TOPAS900 -- TMPA900 Starterkit
###################################### ######################################
@ -107,7 +107,7 @@ proc topasa900_init { } {
sleep 10 sleep 10
# jtag_speed 10000 # jtag_speed 10000
# remap off in case of IROM boot # remap off in case of IROM boot
mww 0xf0000004 0x00000001 mww 0xf0000004 0x00000001
} }

94
tcl/target/c100config.tcl
View File

@ -3,7 +3,7 @@
# set CFG_REFCLKFREQ [configC100 CFG_REFCLKFREQ] # set CFG_REFCLKFREQ [configC100 CFG_REFCLKFREQ]
proc config {label} { proc config {label} {
return [dict get [configC100] $label ] return [dict get [configC100] $label ]
} }
# show the value for the param. with label # show the value for the param. with label
@ -15,7 +15,7 @@ proc showconfig {label} {
# when there are more then one board config # when there are more then one board config
# use soft links to c100board-config.tcl # use soft links to c100board-config.tcl
# so that only the right board-config gets # so that only the right board-config gets
# included (just like include/configs/board-configs.h # included (just like include/configs/board-configs.h
# in u-boot. # in u-boot.
proc configC100 {} { proc configC100 {} {
# xtal freq. 24MHz # xtal freq. 24MHz
@ -28,7 +28,7 @@ proc configC100 {} {
# y = amba_clk * (w+1)*(x+1)*2/xtal_clk # y = amba_clk * (w+1)*(x+1)*2/xtal_clk
dict set configC100 y_amba [expr ([dict get $configC100 CONFIG_SYS_HZ_CLOCK] * ( ([dict get $configC100 w_amba]+1 ) * ([dict get $configC100 x_amba]+1 ) *2 ) / [dict get $configC100 CFG_REFCLKFREQ]) ] dict set configC100 y_amba [expr ([dict get $configC100 CONFIG_SYS_HZ_CLOCK] * ( ([dict get $configC100 w_amba]+1 ) * ([dict get $configC100 x_amba]+1 ) *2 ) / [dict get $configC100 CFG_REFCLKFREQ]) ]
# Arm Clk 450MHz, must be a multiple of 25 MHz # Arm Clk 450MHz, must be a multiple of 25 MHz
dict set configC100 CFG_ARM_CLOCK 450000000 dict set configC100 CFG_ARM_CLOCK 450000000
dict set configC100 w_arm 0 dict set configC100 w_arm 0
dict set configC100 x_arm 1 dict set configC100 x_arm 1
@ -44,7 +44,7 @@ proc setupTelo {} {
# setup GPIO used as control signals for C100 # setup GPIO used as control signals for C100
setupGPIO setupGPIO
# This will allow acces to lower 8MB or NOR # This will allow acces to lower 8MB or NOR
lowGPIO5 lowGPIO5
# setup NOR size,timing,etc. # setup NOR size,timing,etc.
setupNOR setupNOR
# setup internals + PLL + DDR2 # setup internals + PLL + DDR2
@ -55,17 +55,17 @@ proc setupTelo {} {
proc setupNOR {} { proc setupNOR {} {
puts "Setting up NOR: 16MB, 16-bit wide bus, CS0" puts "Setting up NOR: 16MB, 16-bit wide bus, CS0"
# this is taken from u-boot/boards/mindspeed/ooma-darwin/board.c:nor_hw_init() # this is taken from u-boot/boards/mindspeed/ooma-darwin/board.c:nor_hw_init()
set EX_CSEN_REG [regs EX_CSEN_REG ] set EX_CSEN_REG [regs EX_CSEN_REG ]
set EX_CS0_SEG_REG [regs EX_CS0_SEG_REG ] set EX_CS0_SEG_REG [regs EX_CS0_SEG_REG ]
set EX_CS0_CFG_REG [regs EX_CS0_CFG_REG ] set EX_CS0_CFG_REG [regs EX_CS0_CFG_REG ]
set EX_CS0_TMG1_REG [regs EX_CS0_TMG1_REG ] set EX_CS0_TMG1_REG [regs EX_CS0_TMG1_REG ]
set EX_CS0_TMG2_REG [regs EX_CS0_TMG2_REG ] set EX_CS0_TMG2_REG [regs EX_CS0_TMG2_REG ]
set EX_CS0_TMG3_REG [regs EX_CS0_TMG3_REG ] set EX_CS0_TMG3_REG [regs EX_CS0_TMG3_REG ]
set EX_CLOCK_DIV_REG [regs EX_CLOCK_DIV_REG ] set EX_CLOCK_DIV_REG [regs EX_CLOCK_DIV_REG ]
set EX_MFSM_REG [regs EX_MFSM_REG ] set EX_MFSM_REG [regs EX_MFSM_REG ]
set EX_CSFSM_REG [regs EX_CSFSM_REG ] set EX_CSFSM_REG [regs EX_CSFSM_REG ]
set EX_WRFSM_REG [regs EX_WRFSM_REG ] set EX_WRFSM_REG [regs EX_WRFSM_REG ]
set EX_RDFSM_REG [regs EX_RDFSM_REG ] set EX_RDFSM_REG [regs EX_RDFSM_REG ]
# enable Expansion Bus Clock + CS0 (NOR) # enable Expansion Bus Clock + CS0 (NOR)
mww $EX_CSEN_REG 0x3 mww $EX_CSEN_REG 0x3
@ -76,7 +76,7 @@ proc setupNOR {} {
# set timings to NOR # set timings to NOR
mww $EX_CS0_TMG1_REG 0x03034006 mww $EX_CS0_TMG1_REG 0x03034006
mww $EX_CS0_TMG2_REG 0x04040002 mww $EX_CS0_TMG2_REG 0x04040002
#mww $EX_CS0_TMG3_REG #mww $EX_CS0_TMG3_REG
# set EBUS clock 165/5=33MHz # set EBUS clock 165/5=33MHz
mww $EX_CLOCK_DIV_REG 0x5 mww $EX_CLOCK_DIV_REG 0x5
# everthing else is OK with default # everthing else is OK with default
@ -86,7 +86,7 @@ proc bootNOR {} {
set EXP_CS0_BASEADDR [regs EXP_CS0_BASEADDR] set EXP_CS0_BASEADDR [regs EXP_CS0_BASEADDR]
set BLOCK_RESET_REG [regs BLOCK_RESET_REG] set BLOCK_RESET_REG [regs BLOCK_RESET_REG]
set DDR_RST [regs DDR_RST] set DDR_RST [regs DDR_RST]
# put DDR controller in reset (so that it comes reset in u-boot) # put DDR controller in reset (so that it comes reset in u-boot)
mmw $BLOCK_RESET_REG 0x0 $DDR_RST mmw $BLOCK_RESET_REG 0x0 $DDR_RST
# setup CS0 controller for NOR # setup CS0 controller for NOR
@ -107,8 +107,8 @@ proc setupGPIO {} {
#GPIO17 reset for DECT module. #GPIO17 reset for DECT module.
#GPIO29 CS_n for NAND #GPIO29 CS_n for NAND
set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG] set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG]
set GPIO_OE_REG [regs GPIO_OE_REG] set GPIO_OE_REG [regs GPIO_OE_REG]
# set GPIO29=GPIO17=1, GPIO5=0 # set GPIO29=GPIO17=1, GPIO5=0
mww $GPIO_OUTPUT_REG [expr 1<<29 | 1<<17] mww $GPIO_OUTPUT_REG [expr 1<<29 | 1<<17]
@ -118,14 +118,14 @@ proc setupGPIO {} {
proc highGPIO5 {} { proc highGPIO5 {} {
puts "GPIO5 high" puts "GPIO5 high"
set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG] set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG]
# set GPIO5=1 # set GPIO5=1
mmw $GPIO_OUTPUT_REG [expr 1 << 5] 0x0 mmw $GPIO_OUTPUT_REG [expr 1 << 5] 0x0
} }
proc lowGPIO5 {} { proc lowGPIO5 {} {
puts "GPIO5 low" puts "GPIO5 low"
set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG] set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG]
# set GPIO5=0 # set GPIO5=0
mmw $GPIO_OUTPUT_REG 0x0 [expr 1 << 5] mmw $GPIO_OUTPUT_REG 0x0 [expr 1 << 5]
} }
@ -133,21 +133,21 @@ proc lowGPIO5 {} {
proc boardID {id} { proc boardID {id} {
# so far built: # so far built:
# 4'b1111 # 4'b1111
dict set boardID 15 name "EVT1" dict set boardID 15 name "EVT1"
dict set boardID 15 ddr2size 128M dict set boardID 15 ddr2size 128M
# dict set boardID 15 nandsize 1G # dict set boardID 15 nandsize 1G
# dict set boardID 15 norsize 16M # dict set boardID 15 norsize 16M
# 4'b0000 # 4'b0000
dict set boardID 0 name "EVT2" dict set boardID 0 name "EVT2"
dict set boardID 0 ddr2size 128M dict set boardID 0 ddr2size 128M
# 4'b0001 # 4'b0001
dict set boardID 1 name "EVT3" dict set boardID 1 name "EVT3"
dict set boardID 1 ddr2size 256M dict set boardID 1 ddr2size 256M
# 4'b1110 # 4'b1110
dict set boardID 14 name "EVT3_old" dict set boardID 14 name "EVT3_old"
dict set boardID 14 ddr2size 128M dict set boardID 14 ddr2size 128M
# 4'b0010 # 4'b0010
dict set boardID 2 name "EVT4" dict set boardID 2 name "EVT4"
dict set boardID 2 ddr2size 256M dict set boardID 2 ddr2size 256M
return $boardID return $boardID
@ -155,10 +155,10 @@ proc boardID {id} {
# converted from u-boot/boards/mindspeed/ooma-darwin/board.c:ooma_board_detect() # converted from u-boot/boards/mindspeed/ooma-darwin/board.c:ooma_board_detect()
# figure out what board revision this is, uses BOOTSTRAP register to read stuffed resistors # figure out what board revision this is, uses BOOTSTRAP register to read stuffed resistors
proc ooma_board_detect {} { proc ooma_board_detect {} {
set GPIO_BOOTSTRAP_REG [regs GPIO_BOOTSTRAP_REG] set GPIO_BOOTSTRAP_REG [regs GPIO_BOOTSTRAP_REG]
# read the current value of the BOOTSRAP pins # read the current value of the BOOTSRAP pins
set tmp [mrw $GPIO_BOOTSTRAP_REG] set tmp [mrw $GPIO_BOOTSTRAP_REG]
puts [format "GPIO_BOOTSTRAP_REG (0x%x): 0x%x" $GPIO_BOOTSTRAP_REG $tmp] puts [format "GPIO_BOOTSTRAP_REG (0x%x): 0x%x" $GPIO_BOOTSTRAP_REG $tmp]
@ -174,7 +174,7 @@ proc ooma_board_detect {} {
} }
proc configureDDR2regs_256M {} { proc configureDDR2regs_256M {} {
set DENALI_CTL_00_DATA [regs DENALI_CTL_00_DATA] set DENALI_CTL_00_DATA [regs DENALI_CTL_00_DATA]
set DENALI_CTL_01_DATA [regs DENALI_CTL_01_DATA] set DENALI_CTL_01_DATA [regs DENALI_CTL_01_DATA]
set DENALI_CTL_02_DATA [regs DENALI_CTL_02_DATA] set DENALI_CTL_02_DATA [regs DENALI_CTL_02_DATA]
@ -208,7 +208,7 @@ proc configureDDR2regs_256M {} {
mw64bit $DENALI_CTL_04_DATA 0x0000010100000001 mw64bit $DENALI_CTL_04_DATA 0x0000010100000001
mw64bit $DENALI_CTL_05_DATA 0x0203010300010101 mw64bit $DENALI_CTL_05_DATA 0x0203010300010101
mw64bit $DENALI_CTL_06_DATA 0x060a020200020202 mw64bit $DENALI_CTL_06_DATA 0x060a020200020202
mw64bit $DENALI_CTL_07_DATA 0x0000000300000206 mw64bit $DENALI_CTL_07_DATA 0x0000000300000206
mw64bit $DENALI_CTL_08_DATA 0x6400003f3f0a0209 mw64bit $DENALI_CTL_08_DATA 0x6400003f3f0a0209
mw64bit $DENALI_CTL_09_DATA 0x1a000000001a1a1a mw64bit $DENALI_CTL_09_DATA 0x1a000000001a1a1a
mw64bit $DENALI_CTL_10_DATA 0x0120202020191a18 mw64bit $DENALI_CTL_10_DATA 0x0120202020191a18
@ -222,15 +222,15 @@ proc configureDDR2regs_256M {} {
mw64bit $DENALI_CTL_17_DATA 0x0000000000000000 mw64bit $DENALI_CTL_17_DATA 0x0000000000000000
mw64bit $DENALI_CTL_18_DATA 0x0302000000000000 mw64bit $DENALI_CTL_18_DATA 0x0302000000000000
mw64bit $DENALI_CTL_19_DATA 0x00001300c8030600 mw64bit $DENALI_CTL_19_DATA 0x00001300c8030600
mw64bit $DENALI_CTL_20_DATA 0x0000000081fe00c8 mw64bit $DENALI_CTL_20_DATA 0x0000000081fe00c8
set wr_dqs_shift 0x40 set wr_dqs_shift 0x40
# start DDRC # start DDRC
mw64bit $DENALI_CTL_02_DATA [expr $DENALI_CTL_02_VAL | (1 << 32)] mw64bit $DENALI_CTL_02_DATA [expr $DENALI_CTL_02_VAL | (1 << 32)]
# wait int_status[2] (DRAM init complete) # wait int_status[2] (DRAM init complete)
puts -nonewline "Waiting for DDR2 controller to init..." puts -nonewline "Waiting for DDR2 controller to init..."
set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]] set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]]
while { [expr $tmp & 0x040000] == 0 } { while { [expr $tmp & 0x040000] == 0 } {
sleep 1 sleep 1
set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]] set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]]
} }
@ -267,9 +267,9 @@ proc configureDDR2regs_128M {} {
set DENALI_CTL_20_DATA [regs DENALI_CTL_20_DATA] set DENALI_CTL_20_DATA [regs DENALI_CTL_20_DATA]
set DENALI_CTL_02_VAL 0x0100010000010100 set DENALI_CTL_02_VAL 0x0100010000010100
set DENALI_CTL_11_VAL 0x433A42124A650A37 set DENALI_CTL_11_VAL 0x433A42124A650A37
# set some default values # set some default values
mw64bit $DENALI_CTL_00_DATA 0x0100000101010101 mw64bit $DENALI_CTL_00_DATA 0x0100000101010101
mw64bit $DENALI_CTL_01_DATA 0x0100000100000101 mw64bit $DENALI_CTL_01_DATA 0x0100000100000101
mw64bit $DENALI_CTL_02_DATA $DENALI_CTL_02_VAL mw64bit $DENALI_CTL_02_DATA $DENALI_CTL_02_VAL
@ -298,7 +298,7 @@ proc configureDDR2regs_128M {} {
# wait int_status[2] (DRAM init complete) # wait int_status[2] (DRAM init complete)
puts -nonewline "Waiting for DDR2 controller to init..." puts -nonewline "Waiting for DDR2 controller to init..."
set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]] set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]]
while { [expr $tmp & 0x040000] == 0 } { while { [expr $tmp & 0x040000] == 0 } {
sleep 1 sleep 1
set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]] set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]]
} }
@ -318,18 +318,18 @@ proc setupUART0 {} {
set GPIO_IOCTRL_REG [regs GPIO_IOCTRL_REG] set GPIO_IOCTRL_REG [regs GPIO_IOCTRL_REG]
set GPIO_IOCTRL_VAL [regs GPIO_IOCTRL_VAL] set GPIO_IOCTRL_VAL [regs GPIO_IOCTRL_VAL]
set GPIO_IOCTRL_UART0 [regs GPIO_IOCTRL_UART0] set GPIO_IOCTRL_UART0 [regs GPIO_IOCTRL_UART0]
set UART0_LCR [regs UART0_LCR] set UART0_LCR [regs UART0_LCR]
set LCR_DLAB [regs LCR_DLAB] set LCR_DLAB [regs LCR_DLAB]
set UART0_DLL [regs UART0_DLL] set UART0_DLL [regs UART0_DLL]
set UART0_DLH [regs UART0_DLH] set UART0_DLH [regs UART0_DLH]
set UART0_IIR [regs UART0_IIR] set UART0_IIR [regs UART0_IIR]
set UART0_IER [regs UART0_IER] set UART0_IER [regs UART0_IER]
set LCR_ONE_STOP [regs LCR_ONE_STOP] set LCR_ONE_STOP [regs LCR_ONE_STOP]
set LCR_CHAR_LEN_8 [regs LCR_CHAR_LEN_8] set LCR_CHAR_LEN_8 [regs LCR_CHAR_LEN_8]
set FCR_XMITRES [regs FCR_XMITRES] set FCR_XMITRES [regs FCR_XMITRES]
set FCR_RCVRRES [regs FCR_RCVRRES] set FCR_RCVRRES [regs FCR_RCVRRES]
set FCR_FIFOEN [regs FCR_FIFOEN] set FCR_FIFOEN [regs FCR_FIFOEN]
set IER_UUE [regs IER_UUE] set IER_UUE [regs IER_UUE]
# unlock writing to IOCTRL register # unlock writing to IOCTRL register
mww $GPIO_LOCK_REG $GPIO_IOCTRL_VAL mww $GPIO_LOCK_REG $GPIO_IOCTRL_VAL
@ -355,7 +355,7 @@ proc setupUART0 {} {
proc putcUART0 {char} { proc putcUART0 {char} {
set UART0_LSR [regs UART0_LSR] set UART0_LSR [regs UART0_LSR]
set UART0_THR [regs UART0_THR] set UART0_THR [regs UART0_THR]
set LSR_TEMT [regs LSR_TEMT] set LSR_TEMT [regs LSR_TEMT]
@ -392,7 +392,7 @@ proc trainDDR2 {} {
proc flashUBOOT {file} { proc flashUBOOT {file} {
# this will update uboot on NOR partition # this will update uboot on NOR partition
set EXP_CS0_BASEADDR [regs EXP_CS0_BASEADDR] set EXP_CS0_BASEADDR [regs EXP_CS0_BASEADDR]
# setup CS0 controller for NOR # setup CS0 controller for NOR
setupNOR setupNOR
# make sure we are accessing the lower part of NOR # make sure we are accessing the lower part of NOR

6
tcl/target/telo.cfg
View File

@ -11,7 +11,7 @@ source [find c100helper.tcl]
# Note that libftd2xx.so tries to assert srst # Note that libftd2xx.so tries to assert srst
# which break this script # which break this script
# use libftdi.so library instead with this script # use libftdi.so library instead with this script
# make the reset asserted to # make the reset asserted to
# allow RC circuit to discharge for: [ms] # allow RC circuit to discharge for: [ms]
jtag_nsrst_assert_width 100 jtag_nsrst_assert_width 100
jtag_ntrst_assert_width 100 jtag_ntrst_assert_width 100
@ -39,7 +39,7 @@ $_TARGETNAME configure -event reset-deassert-post {
# Force target into ARM state. # Force target into ARM state.
# soft_reset_halt # not implemented on ARM11 # soft_reset_halt # not implemented on ARM11
puts "Detected SRSRT asserted on C100.CPU" puts "Detected SRSRT asserted on C100.CPU"
} }
$_TARGETNAME configure -event reset-assert-post { $_TARGETNAME configure -event reset-assert-post {
@ -47,7 +47,7 @@ $_TARGETNAME configure -event reset-assert-post {
#sleep 10 #sleep 10
} }
proc power_restore {} { puts "Sensed power restore. No action." } proc power_restore {} { puts "Sensed power restore. No action." }
proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." } proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." }

12
tcl/target/tmpa900.cfg
View File

@ -2,15 +2,15 @@
# Target: Toshiba TMPA910 # Target: Toshiba TMPA910
###################################### ######################################
if { [info exists CHIPNAME] } { if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME set _CHIPNAME $CHIPNAME
} else { } else {
set _CHIPNAME tmpa910 set _CHIPNAME tmpa910
} }
if { [info exists ENDIAN] } { if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN set _ENDIAN $ENDIAN
} else { } else {
set _ENDIAN little set _ENDIAN little
} }

12
tcl/target/tmpa910.cfg
View File

@ -2,15 +2,15 @@
# Target: Toshiba TMPA910 # Target: Toshiba TMPA910
###################################### ######################################
if { [info exists CHIPNAME] } { if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME set _CHIPNAME $CHIPNAME
} else { } else {
set _CHIPNAME tmpa910 set _CHIPNAME tmpa910
} }
if { [info exists ENDIAN] } { if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN set _ENDIAN $ENDIAN
} else { } else {
set _ENDIAN little set _ENDIAN little
} }