doc: fix some typo about STMicroelectronics name

s/ST/STMicroelectronics/
s/ST Micro/STMicroelectronics/
s/ST Microelectronics/STMicroelectronics/

Change-Id: I62aef331d172db22a70841a089c1889e37997cde
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4718
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Antonio Borneo 2018-10-04 11:11:31 +02:00 committed by Spencer Oliver
parent 0bad9a42a3
commit 32aec3b5c8
1 changed files with 12 additions and 12 deletions

View File

@ -156,8 +156,8 @@ OpenOCD internally. @xref{Debug Adapter Hardware}.
@b{GDB Debug:} It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T,
ARM922T, ARM926EJ--S, ARM966E--S), XScale (PXA25x, IXP42x), Cortex-M3
(Stellaris LM3, ST STM32 and Energy Micro EFM32) and Intel Quark (x10xx)
based cores to be debugged via the GDB protocol.
(Stellaris LM3, STMicroelectronics STM32 and Energy Micro EFM32) and
Intel Quark (x10xx) based cores to be debugged via the GDB protocol.
@b{Flash Programming:} Flash writing is supported for external
CFI-compatible NOR flashes (Intel and AMD/Spansion command set) and several
@ -477,8 +477,8 @@ SWD and not JTAG, thus not supported.
@end itemize
@section USB ST-LINK based
ST Micro has an adapter called @b{ST-LINK}.
They only work with ST Micro chips, notably STM32 and STM8.
STMicroelectronics has an adapter called @b{ST-LINK}.
They only work with STMicroelectronics chips, notably STM32 and STM8.
@itemize @bullet
@item @b{ST-LINK}
@ -3047,7 +3047,7 @@ This is a driver that supports multiple High Level Adapters.
This type of adapter does not expose some of the lower level api's
that OpenOCD would normally use to access the target.
Currently supported adapters include the ST ST-LINK and TI ICDI.
Currently supported adapters include the STMicroelectronics ST-LINK and TI ICDI.
ST-LINK firmware version >= V2.J21.S4 recommended due to issues with earlier
versions of firmware where serial number is reset after first use. Suggest
using ST firmware update utility to upgrade ST-LINK firmware even if current
@ -6470,7 +6470,7 @@ applied to all of them.
@deffn {Flash Driver} stm32f1x
All members of the STM32F0, STM32F1 and STM32F3 microcontroller families
from ST Microelectronics include internal flash and use ARM Cortex-M0/M3/M4 cores.
from STMicroelectronics include internal flash and use ARM Cortex-M0/M3/M4 cores.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
@ -6530,7 +6530,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
@deffn {Flash Driver} stm32f2x
All members of the STM32F2, STM32F4 and STM32F7 microcontroller families from ST Microelectronics
All members of the STM32F2, STM32F4 and STM32F7 microcontroller families from STMicroelectronics
include internal flash and use ARM Cortex-M3/M4/M7 cores.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
@ -6584,7 +6584,7 @@ The @var{num} parameter is a value shown by @command{flash banks}, @var{optcr2}
@end deffn
@deffn {Flash Driver} stm32h7x
All members of the STM32H7 microcontroller families from ST Microelectronics
All members of the STM32H7 microcontroller families from STMicroelectronics
include internal flash and use ARM Cortex-M7 core.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
@ -6620,7 +6620,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
@deffn {Flash Driver} stm32lx
All members of the STM32L microcontroller families from ST Microelectronics
All members of the STM32L microcontroller families from STMicroelectronics
include internal flash and use ARM Cortex-M3 and Cortex-M0+ cores.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
@ -6660,7 +6660,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
@deffn {Flash Driver} stm32l4x
All members of the STM32L4 microcontroller families from ST Microelectronics
All members of the STM32L4 microcontroller families from STMicroelectronics
include internal flash and use ARM Cortex-M4 cores.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
@ -6732,7 +6732,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
@deffn {Flash Driver} str7x
All members of the STR7 microcontroller family from ST Microelectronics
All members of the STR7 microcontroller family from STMicroelectronics
include internal flash and use ARM7TDMI cores.
The @var{str7x} driver defines one mandatory parameter, @var{variant},
which is either @code{STR71x}, @code{STR73x} or @code{STR75x}.
@ -6749,7 +6749,7 @@ for the specified flash bank.
@end deffn
@deffn {Flash Driver} str9x
Most members of the STR9 microcontroller family from ST Microelectronics
Most members of the STR9 microcontroller family from STMicroelectronics
include internal flash and use ARM966E cores.
The str9 needs the flash controller to be configured using
the @command{str9x flash_config} command prior to Flash programming.