imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

target.cfg: update to use new flash configuration syntax 

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
This commit is contained in:
Spencer Oliver 2009-12-17 10:53:09 +00:00
parent 960ad2f776
commit 3616b93eee
11 changed files with 15 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
tcl/target/aduc702x.cfg
View File

@ -36,7 +36,7 @@ $_TARGETNAME configure -work-area-phys 0x10000 -work-area-size 0x2000
## flash configuration
# only target number is needed
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME aduc702x 0 0 0 0 0
flash bank $_FLASHNAME aduc702x 0 0 0 0 $_TARGETNAME
## If you use the watchdog, the following code makes sure that the board
## doesn't reboot when halted via JTAG. Yes, on the older generation

2
tcl/target/faux.cfg
View File

@ -27,4 +27,4 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
#dummy flash driver
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME faux 0x01000000 0x200000 2 2 0
flash bank $_FLASHNAME faux 0x01000000 0x200000 2 2 $_TARGETNAME

2
tcl/target/lpc2900.cfg
View File

@ -63,4 +63,4 @@ arm7_9 dcc_downloads enable
# Flash: flash bank lpc2900 0 0 0 0 <target#> <flash clock (CLK_SYS_FMC) in kHz>
# Flash base address, total flash size, and number of sectors are all configured automatically.
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME lpc2900 0 0 0 0 $_TARGETNAME $FLASH_CLOCK
flash bank $_FLASHNAME lpc2900 0 0 0 0 $_TARGETNAME $FLASH_CLOCK

2
tcl/target/mega128.cfg
View File

@ -23,7 +23,7 @@ target create $_TARGETNAME avr -endian $_ENDIAN -chain-position $_TARGETNAME
#$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME avr 0 0 0 0 0
flash bank $_FLASHNAME avr 0 0 0 0 $_TARGETNAME
#to use it, script will be like:
#init

4
tcl/target/pic32mx.cfg
View File

@ -34,9 +34,9 @@ target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAM
$_TARGETNAME configure -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME pic32mx 0xbd000000 0 0 0 0
flash bank $_FLASHNAME pic32mx 0xbd000000 0 0 0 $_TARGETNAME
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME pic32mx 0xbfc00000 0 0 0 0
flash bank $_FLASHNAME pic32mx 0xbfc00000 0 0 0 $_TARGETNAME
# For more information about the configuration files, take a look at:
# openocd.texi

2
tcl/target/sam7se512.cfg
View File

@ -36,5 +36,5 @@ $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-a
#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432

2
tcl/target/sam7x256.cfg
View File

@ -47,7 +47,7 @@ $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-a
#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432
# For more information about the configuration files, take a look at:
# openocd.texi

4
tcl/target/str710.cfg
View File

@ -40,9 +40,9 @@ $_TARGETNAME configure -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-a
#flash bank str7x <base> <size> 0 0 <target#> <variant>
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 0 STR71x
flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 0 STR71x
flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 $_TARGETNAME STR71x
# For more information about the configuration files, take a look at:
# openocd.texi

2
tcl/target/str730.cfg
View File

@ -43,5 +43,5 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-a
#flash bank <driver> <base> <size> <chip_width> <bus_width>
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 0 STR3x
flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 $_TARGETNAME STR3x

4
tcl/target/str750.cfg
View File

@ -46,7 +46,7 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-a
#flash bank <driver> <base> <size> <chip_width> <bus_width>
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 0 STR75x
flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 $_TARGETNAME STR75x
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME str7x 0x200C0000 0x00004000 0 0 0 STR75x
flash bank $_FLASHNAME str7x 0x200C0000 0x00004000 0 0 $_TARGETNAME STR75x

4
tcl/target/str912.cfg
View File

@ -64,9 +64,9 @@ $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-ar
#flash bank str9x <base> <size> 0 0 <target#> <variant>
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 $_TARGETNAME
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0
flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 $_TARGETNAME
# For more information about the configuration files, take a look at:
# openocd.texi