imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ADIv5: use new DAP ops for AP read/write 

Make ADIv5 internals use the two new transport-neutral calls for reading
and writing DP registers; and do the same for external callers.  Also,
bugfix some of their call sites to handle the fault returns, instead of
ignoring them.

Remove most of the JTAG-specific calls, using their code as the bodies
of the JTAG-specific implementation for the new methods.

NOTE that there's a remaining issue:  mem_ap_read_buf_u32() makes calls
which are JTAG-specific.  A later patch will need to remove those, so
JTAG-specific operations can be removed from this file, and so that SWD
support will be able to properly drop in as just a transport layer to the
ADIv5 infrastructure.  (The way read results are posted may need some more
attention in the transport-neutrality interface.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This commit is contained in:
David Brownell 2010-03-02 22:49:36 -08:00
parent 61ee632dbc
commit 381ce4308c
3 changed files with 79 additions and 106 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

165
src/target/arm_adi_v5.c
View File

@ -328,8 +328,16 @@ static int jtagdp_transaction_endcheck(struct swjdp_common *swjdp)
LOG_DEBUG("jtag-dp: CTRL/STAT 0x%" PRIx32, ctrlstat);
dap_ap_read_reg_u32(swjdp, AP_REG_CSW, &mem_ap_csw);
dap_ap_read_reg_u32(swjdp, AP_REG_TAR, &mem_ap_tar);
retval = dap_queue_ap_read(swjdp,
AP_REG_CSW, &mem_ap_csw);
if (retval != ERROR_OK)
return retval;
retval = dap_queue_ap_read(swjdp,
AP_REG_TAR, &mem_ap_tar);
if (retval != ERROR_OK)
return retval;
if ((retval = dap_run(swjdp)) != ERROR_OK)
return retval;
LOG_ERROR("MEM_AP_CSW 0x%" PRIx32 ", MEM_AP_TAR 0x%"
@ -375,79 +383,6 @@ void dap_ap_select(struct swjdp_common *swjdp,uint8_t apsel)
}
}
/** Select the AP register bank matching bits 7:4 of ap_reg. */
static int dap_ap_bankselect(struct swjdp_common *swjdp, uint32_t ap_reg)
{
uint32_t select = (ap_reg & 0x000000F0);
if (select != swjdp->ap_bank_value)
{
swjdp->ap_bank_value = select;
select |= swjdp->apsel;
return dap_queue_dp_write(swjdp, DP_SELECT, select);
} else
return ERROR_OK;
}
/* FIXME remove dap_ap_{read,write}_reg() and dap_ap_write_reg_u32()
* ... these should become the bodies of the JTAG implementations of
* dap_queue_ap_{read,write}(), then all their current callers should
* switch over to the transport-neutral calls.
*/
static int dap_ap_write_reg(struct swjdp_common *swjdp,
uint32_t reg_addr, uint8_t *out_value_buf)
{
int retval;
retval = dap_ap_bankselect(swjdp, reg_addr);
if (retval != ERROR_OK)
return retval;
return adi_jtag_ap_write_check(swjdp, reg_addr, out_value_buf);
}
/**
* Asynchronous (queued) AP register write.
*
* @param swjdp The DAP whose currently selected AP will be written.
* @param reg_addr Eight bit AP register address.
* @param value Word to be written at reg_addr
*
* @return ERROR_OK if the transaction was properly queued, else a fault code.
*/
int dap_ap_write_reg_u32(struct swjdp_common *swjdp,
uint32_t reg_addr, uint32_t value)
{
uint8_t out_value_buf[4];
buf_set_u32(out_value_buf, 0, 32, value);
return dap_ap_write_reg(swjdp,
reg_addr, out_value_buf);
}
/**
* Asynchronous (queued) AP register eread.
*
* @param swjdp The DAP whose currently selected AP will be read.
* @param reg_addr Eight bit AP register address.
* @param value Points to where the 32-bit (little-endian) word will be stored.
*
* @return ERROR_OK if the transaction was properly queued, else a fault code.
*/
int dap_ap_read_reg_u32(struct swjdp_common *swjdp,
uint32_t reg_addr, uint32_t *value)
{
int retval;
retval = dap_ap_bankselect(swjdp, reg_addr);
if (retval != ERROR_OK)
return retval;
return adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_APACC, reg_addr,
DPAP_READ, 0, value);
}
/**
* Queue transactions setting up transfer parameters for the
* currently selected MEM-AP.
@ -475,7 +410,7 @@ int dap_setup_accessport(struct swjdp_common *swjdp, uint32_t csw, uint32_t tar)
if (csw != swjdp->ap_csw_value)
{
/* LOG_DEBUG("DAP: Set CSW %x",csw); */
retval = dap_ap_write_reg_u32(swjdp, AP_REG_CSW, csw);
retval = dap_queue_ap_write(swjdp, AP_REG_CSW, csw);
if (retval != ERROR_OK)
return retval;
swjdp->ap_csw_value = csw;
@ -483,7 +418,7 @@ int dap_setup_accessport(struct swjdp_common *swjdp, uint32_t csw, uint32_t tar)
if (tar != swjdp->ap_tar_value)
{
/* LOG_DEBUG("DAP: Set TAR %x",tar); */
retval = dap_ap_write_reg_u32(swjdp, AP_REG_TAR, tar);
retval = dap_queue_ap_write(swjdp, AP_REG_TAR, tar);
if (retval != ERROR_OK)
return retval;
swjdp->ap_tar_value = tar;
@ -518,7 +453,7 @@ int mem_ap_read_u32(struct swjdp_common *swjdp, uint32_t address,
if (retval != ERROR_OK)
return retval;
return dap_ap_read_reg_u32(swjdp, AP_REG_BD0 | (address & 0xC), value);
return dap_queue_ap_read(swjdp, AP_REG_BD0 | (address & 0xC), value);
}
/**
@ -569,7 +504,7 @@ int mem_ap_write_u32(struct swjdp_common *swjdp, uint32_t address,
if (retval != ERROR_OK)
return retval;
return dap_ap_write_reg_u32(swjdp, AP_REG_BD0 | (address & 0xC),
return dap_queue_ap_write(swjdp, AP_REG_BD0 | (address & 0xC),
value);
}
@ -645,7 +580,10 @@ int mem_ap_write_buf_u32(struct swjdp_common *swjdp, uint8_t *buffer, int count,
for (writecount = 0; writecount < blocksize; writecount++)
{
dap_ap_write_reg(swjdp, AP_REG_DRW, buffer + 4 * writecount);
retval = dap_queue_ap_write(swjdp, AP_REG_DRW,
*(uint32_t *) (buffer + 4 * writecount));
if (retval != ERROR_OK)
break;
}
if (dap_run(swjdp) == ERROR_OK)
@ -725,7 +663,11 @@ static int mem_ap_write_buf_packed_u16(struct swjdp_common *swjdp,
}
memcpy(&outvalue, buffer, sizeof(uint32_t));
dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
retval = dap_queue_ap_write(swjdp,
AP_REG_DRW, outvalue);
if (retval != ERROR_OK)
break;
if (dap_run(swjdp) != ERROR_OK)
{
LOG_WARNING("Block write error address "
@ -759,7 +701,10 @@ int mem_ap_write_buf_u16(struct swjdp_common *swjdp, uint8_t *buffer, int count,
uint16_t svalue;
memcpy(&svalue, buffer, sizeof(uint16_t));
uint32_t outvalue = (uint32_t)svalue << 8 * (address & 0x3);
dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
retval = dap_queue_ap_write(swjdp, AP_REG_DRW, outvalue);
if (retval != ERROR_OK)
break;
retval = dap_run(swjdp);
if (retval != ERROR_OK)
break;
@ -822,7 +767,11 @@ static int mem_ap_write_buf_packed_u8(struct swjdp_common *swjdp,
}
memcpy(&outvalue, buffer, sizeof(uint32_t));
dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
retval = dap_queue_ap_write(swjdp,
AP_REG_DRW, outvalue);
if (retval != ERROR_OK)
break;
if (dap_run(swjdp) != ERROR_OK)
{
LOG_WARNING("Block write error address "
@ -854,7 +803,10 @@ int mem_ap_write_buf_u8(struct swjdp_common *swjdp, uint8_t *buffer, int count,
{
dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
uint32_t outvalue = (uint32_t)*buffer << 8 * (address & 0x3);
dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
retval = dap_queue_ap_write(swjdp, AP_REG_DRW, outvalue);
if (retval != ERROR_OK)
break;
retval = dap_run(swjdp);
if (retval != ERROR_OK)
break;
@ -903,6 +855,13 @@ int mem_ap_read_buf_u32(struct swjdp_common *swjdp, uint8_t *buffer,
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_SINGLE,
address);
/* FIXME remove these three calls to adi_jtag_dp_scan(),
* so this routine becomes transport-neutral. Be careful
* not to cause performance problems with JTAG; would it
* suffice to loop over dap_queue_ap_read(), or would that
* be slower when JTAG is the chosen transport?
*/
/* Scan out first read */
adi_jtag_dp_scan(swjdp, JTAG_DP_APACC, AP_REG_DRW,
DPAP_READ, 0, NULL, NULL);
@ -992,7 +951,7 @@ static int mem_ap_read_buf_packed_u16(struct swjdp_common *swjdp,
do
{
dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
retval = dap_queue_ap_read(swjdp, AP_REG_DRW, &invalue);
if (dap_run(swjdp) != ERROR_OK)
{
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
@ -1037,7 +996,10 @@ int mem_ap_read_buf_u16(struct swjdp_common *swjdp, uint8_t *buffer,
while (count > 0)
{
dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
retval = dap_queue_ap_read(swjdp, AP_REG_DRW, &invalue);
if (retval != ERROR_OK)
break;
retval = dap_run(swjdp);
if (retval != ERROR_OK)
break;
@ -1094,7 +1056,7 @@ static int mem_ap_read_buf_packed_u8(struct swjdp_common *swjdp,
do
{
dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
retval = dap_queue_ap_read(swjdp, AP_REG_DRW, &invalue);
if (dap_run(swjdp) != ERROR_OK)
{
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
@ -1139,7 +1101,7 @@ int mem_ap_read_buf_u8(struct swjdp_common *swjdp, uint8_t *buffer,
while (count > 0)
{
dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
retval = dap_queue_ap_read(swjdp, AP_REG_DRW, &invalue);
retval = dap_run(swjdp);
if (retval != ERROR_OK)
break;
@ -1199,6 +1161,7 @@ static int jtag_dp_q_write(struct swjdp_common *dap, unsigned reg,
reg, DPAP_WRITE, data, NULL);
}
/** Select the AP register bank matching bits 7:4 of reg. */
static int jtag_ap_q_bankselect(struct swjdp_common *dap, unsigned reg)
{
uint32_t select = reg & 0x000000F0;
@ -1219,17 +1182,23 @@ static int jtag_ap_q_read(struct swjdp_common *dap, unsigned reg,
if (retval != ERROR_OK)
return retval;
return dap_ap_read_reg_u32(dap, reg, data);
return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_APACC, reg,
DPAP_READ, 0, data);
}
static int jtag_ap_q_write(struct swjdp_common *dap, unsigned reg,
uint32_t data)
{
int retval = jtag_ap_q_bankselect(dap, reg);
uint8_t out_value_buf[4];
int retval = jtag_ap_q_bankselect(dap, reg);
if (retval != ERROR_OK)
return retval;
return dap_ap_write_reg_u32(dap, reg, data);
buf_set_u32(out_value_buf, 0, 32, data);
return adi_jtag_ap_write_check(dap, reg, out_value_buf);
}
static int jtag_ap_q_abort(struct swjdp_common *dap, uint8_t *ack)
@ -1355,8 +1324,8 @@ int ahbap_debugport_init(struct swjdp_common *swjdp)
* Should it? If the ROM address is valid, is this the right
* place to scan the table and do any topology detection?
*/
dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &idreg);
dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &romaddr);
retval = dap_queue_ap_read(swjdp, AP_REG_IDR, &idreg);
retval = dap_queue_ap_read(swjdp, AP_REG_BASE, &romaddr);
LOG_DEBUG("MEM-AP #%d ID Register 0x%" PRIx32
", Debug ROM Address 0x%" PRIx32,
@ -1398,8 +1367,8 @@ int dap_info_command(struct command_context *cmd_ctx,
apselold = swjdp->apsel;
dap_ap_select(swjdp, apsel);
dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &dbgbase);
dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &apid);
retval = dap_queue_ap_read(swjdp, AP_REG_BASE, &dbgbase);
retval = dap_queue_ap_read(swjdp, AP_REG_IDR, &apid);
retval = dap_run(swjdp);
if (retval != ERROR_OK)
return retval;
@ -1770,7 +1739,7 @@ DAP_COMMAND_HANDLER(dap_baseaddr_command)
* though they're not common for now. This should
* use the ID register to verify it's a MEM-AP.
*/
dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &baseaddr);
retval = dap_queue_ap_read(swjdp, AP_REG_BASE, &baseaddr);
retval = dap_run(swjdp);
if (retval != ERROR_OK)
return retval;
@ -1825,7 +1794,7 @@ DAP_COMMAND_HANDLER(dap_apsel_command)
}
dap_ap_select(swjdp, apsel);
dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &apid);
retval = dap_queue_ap_read(swjdp, AP_REG_IDR, &apid);
retval = dap_run(swjdp);
if (retval != ERROR_OK)
return retval;
@ -1859,7 +1828,7 @@ DAP_COMMAND_HANDLER(dap_apid_command)
if (apselsave != apsel)
dap_ap_select(swjdp, apsel);
dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &apid);
retval = dap_queue_ap_read(swjdp, AP_REG_IDR, &apid);
retval = dap_run(swjdp);
if (retval != ERROR_OK)
return retval;

4
src/target/arm_adi_v5.h
View File

@ -350,10 +350,6 @@ void dap_ap_select(struct swjdp_common *dap,uint8_t apsel);
/* Queued AP transactions */
int dap_setup_accessport(struct swjdp_common *swjdp,
uint32_t csw, uint32_t tar);
int dap_ap_write_reg_u32(struct swjdp_common *swjdp,
uint32_t addr, uint32_t value);
int dap_ap_read_reg_u32(struct swjdp_common *swjdp,
uint32_t addr, uint32_t *value);
/* Queued MEM-AP memory mapped single word transfers */
int mem_ap_read_u32(struct swjdp_common *swjdp, uint32_t address, uint32_t *value);

16
src/target/cortex_m3.c
View File

@ -72,13 +72,19 @@ static int cortexm3_dap_read_coreregister_u32(struct swjdp_common *swjdp,
/* mem_ap_write_u32(swjdp, DCB_DCRSR, regnum); */
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRSR & 0xFFFFFFF0);
dap_ap_write_reg_u32(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum);
retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum);
if (retval != ERROR_OK)
return retval;
/* mem_ap_read_u32(swjdp, DCB_DCRDR, value); */
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRDR & 0xFFFFFFF0);
dap_ap_read_reg_u32(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
retval = dap_queue_ap_read(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
if (retval != ERROR_OK)
return retval;
retval = dap_run(swjdp);
if (retval != ERROR_OK)
return retval;
/* restore DCB_DCRDR - this needs to be in a seperate
* transaction otherwise the emulated DCC channel breaks */
@ -101,11 +107,13 @@ static int cortexm3_dap_write_coreregister_u32(struct swjdp_common *swjdp,
/* mem_ap_write_u32(swjdp, DCB_DCRDR, core_regs[i]); */
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRDR & 0xFFFFFFF0);
dap_ap_write_reg_u32(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
// XXX check retval
/* mem_ap_write_u32(swjdp, DCB_DCRSR, i | DCRSR_WnR); */
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRSR & 0xFFFFFFF0);
dap_ap_write_reg_u32(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum | DCRSR_WnR);
retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum | DCRSR_WnR);
// XXX check retval
retval = dap_run(swjdp);