Laurentiu Cocanu - document various commands.

git-svn-id: svn://svn.berlios.de/openocd/trunk@1083 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
oharboe 2008-10-17 14:53:08 +00:00
parent 871d2f2d01
commit 39d5677fc9
1 changed files with 28 additions and 0 deletions

View File

@ -835,6 +835,13 @@ openocd -c "fast enable" -c "interface dummy" -f target/str710.cfg
@subsection Target state handling
@itemize @bullet
@item @b{reg} [@option{#}|@option{name}] [value]
@cindex reg
@*Access a single register by its number[@option{#}] or by its [@option{name}].
No arguments: list all available registers for the current target.
Number or name argument: display a register
Number or name and value arguments: set register value
@item @b{poll} [@option{on}|@option{off}]
@cindex poll
@*Poll the target for its current state. If the target is in debug mode, architecture
@ -880,6 +887,10 @@ With no arguments a "reset run" is executed
@*Immediately halt the target, and execute the reset script (works only with certain
configurations)
@end itemize
@item @b{soft_reset_halt}
@cindex reset
@*Requesting target halt and executing a soft reset.
@end itemize
@subsection Memory access commands
@ -919,6 +930,23 @@ These commands allow accesses of a specific size to the memory system:
This will first attempt comparison using a crc checksum, if this fails it will try a binary compare.
@end itemize
@subsection Breakpoint commands
@cindex Breakpoint commands
@itemize @bullet
@item @b{bp} <@var{addr}> <@var{len}> [@var{hw}]
@cindex bp
@*set breakpoint <address> <length> [hw]
@item @b{rbp} <@var{addr}>
@cindex rbp
@*remove breakpoint <adress>
@item @b{wp} <@var{addr}> <@var{len}> <@var{r}|@var{w}|@var{a}> [@var{value}] [@var{mask}]
@cindex wp
@*set watchpoint <address> <length> <r/w/a> [value] [mask]
@item @b{rwp} <@var{addr}>
@cindex rwp
@*remove watchpoint <adress>
@end itemize
@subsection Flash commands
@cindex Flash commands
@itemize @bullet