flash/nor: add mrvlqspi flash controller driver

This patch adds support for QSPI flash controller driver for
Marvell's Wireless Microcontroller platform.
For more information please refer,
https://origin-www.marvell.com/microcontrollers/wi-fi-microcontroller-platform/

Following things have been tested on 88MC200 (Winbond W25Q80BV flash chip):
1. Flash sector level erase
2. Flash chip erase
3. Flash write in normal SPI mode
4. Flash fill (write and verify) in normal SPI mode

Change-Id: If4414ae3f77ff170b84e426a35b66c44590c5e06
Signed-off-by: Mahavir Jain <mjain@marvell.com>
Reviewed-on: http://openocd.zylin.com/2280
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Mahavir Jain 2014-09-04 15:31:16 +05:30 committed by Spencer Oliver
parent e921c69e0e
commit 447fb25324
4 changed files with 1196 additions and 1 deletions

View File

@ -0,0 +1,232 @@
/***************************************************************************
* Copyright (C) 2014 by Mahavir Jain <mjain@marvell.com> *
* *
* Adapted from (contrib/loaders/flash/lpcspifi_write.S): *
* Copyright (C) 2012 by George Harris *
* george@luminairecoffee.com *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
***************************************************************************/
.text
.syntax unified
.cpu cortex-m3
.thumb
.thumb_func
/*
* For compilation:
* arm-none-eabi-gcc -mcpu=cortex-m3 -mthumb -c contrib/loaders/flash/mrvlqspi_write.S
* arm-none-eabi-objcopy -O binary mrvlqspi_write.o code.bin
* Copy code.bin into mrvlqspi flash driver
*/
/*
* Params :
* r0 = workarea start, status (out)
* r1 = workarea end
* r2 = target address (offset from flash base)
* r3 = count (bytes)
* r4 = page size
* r5 = qspi base address
* Clobbered:
* r7 - rp
* r8 - wp, tmp
* r9 - send/receive data
* r10 - current page end address
*/
#define CNTL 0x0
#define CONF 0x4
#define DOUT 0x8
#define DIN 0xc
#define INSTR 0x10
#define ADDR 0x14
#define RDMODE 0x18
#define HDRCNT 0x1c
#define DINCNT 0x20
#define SS_EN (1 << 0)
#define XFER_RDY (1 << 1)
#define RFIFO_EMPTY (1 << 4)
#define WFIFO_EMPTY (1 << 6)
#define WFIFO_FULL (1 << 7)
#define FIFO_FLUSH (1 << 9)
#define RW_EN (1 << 13)
#define XFER_STOP (1 << 14)
#define XFER_START (1 << 15)
#define INS_WRITE_ENABLE 0x06
#define INS_READ_STATUS 0x05
#define INS_PAGE_PROGRAM 0x02
init:
mov.w r10, #0x00
find_next_page_boundary:
add r10, r4 /* Increment to the next page */
cmp r10, r2
/* If we have not reached the next page boundary after the target address, keep going */
bls find_next_page_boundary
write_enable:
/* Flush read/write fifo's */
bl flush_fifo
/* Instruction byte 1 */
movs r8, #0x1
str r8, [r5, #HDRCNT]
/* Set write enable instruction */
movs r8, #INS_WRITE_ENABLE
str r8, [r5, #INSTR]
movs r9, #0x1
bl start_tx
bl stop_tx
page_program:
/* Instruction byte 1, Addr byte 3 */
movs r8, #0x31
str r8, [r5, #HDRCNT]
/* Todo: set addr and data pin to single */
write_address:
mov r8, r2
str r8, [r5, #ADDR]
/* Set page program instruction */
movs r8, #INS_PAGE_PROGRAM
str r8, [r5, #INSTR]
/* Start write transfer */
movs r9, #0x1
bl start_tx
wait_fifo:
ldr r8, [r0] /* read the write pointer */
cmp r8, #0 /* if it's zero, we're gonzo */
beq exit
ldr r7, [r0, #4] /* read the read pointer */
cmp r7, r8 /* wait until they are not equal */
beq wait_fifo
write:
ldrb r9, [r7], #0x01 /* Load one byte from the FIFO, increment the read pointer by 1 */
bl write_data /* send the byte to the flash chip */
cmp r7, r1 /* wrap the read pointer if it is at the end */
it cs
addcs r7, r0, #8 /* skip loader args */
str r7, [r0, #4] /* store the new read pointer */
subs r3, r3, #1 /* decrement count */
cmp r3, #0 /* Exit if we have written everything */
beq write_wait
add r2, #1 /* Increment flash address by 1 */
cmp r10, r2 /* See if we have reached the end of a page */
bne wait_fifo /* If not, keep writing bytes */
write_wait:
bl stop_tx /* Otherwise, end the command and keep going w/ the next page */
add r10, r4 /* Move up the end-of-page address by the page size*/
check_flash_busy: /* Wait for the flash to finish the previous page write */
/* Flush read/write fifo's */
bl flush_fifo
/* Instruction byte 1 */
movs r8, #0x1
str r8, [r5, #HDRCNT]
/* Continuous data in of status register */
movs r8, #0x0
str r8, [r5, #DINCNT]
/* Set write enable instruction */
movs r8, #INS_READ_STATUS
str r8, [r5, #INSTR]
/* Start read transfer */
movs r9, #0x0
bl start_tx
wait_flash_busy:
bl read_data
and.w r9, r9, #0x1
cmp r9, #0x0
bne.n wait_flash_busy
bl stop_tx
cmp r3, #0
bne.n write_enable /* If it is done, start a new page write */
b exit /* All data written, exit */
write_data: /* Send/receive 1 byte of data over QSPI */
ldr r8, [r5, #CNTL]
lsls r8, r8, #24
bmi.n write_data
str r9, [r5, #DOUT]
bx lr
read_data: /* Read 1 byte of data over QSPI */
ldr r8, [r5, #CNTL]
lsls r8, r8, #27
bmi.n read_data
ldr r9, [r5, #DIN]
bx lr
flush_fifo: /* Flush read write fifos */
ldr r8, [r5, #CONF]
orr.w r8, r8, #FIFO_FLUSH
str r8, [r5, #CONF]
flush_reset:
ldr r8, [r5, #CONF]
lsls r8, r8, #22
bmi.n flush_reset
bx lr
start_tx:
ldr r8, [r5, #CNTL]
orr.w r8, r8, #SS_EN
str r8, [r5, #CNTL]
xfer_rdy:
ldr r8, [r5, #CNTL]
lsls r8, r8, #30
bpl.n xfer_rdy
ldr r8, [r5, #CONF]
bfi r8, r9, #13, #1
orr.w r8, r8, #XFER_START
str r8, [r5, #CONF]
bx lr
stop_tx:
ldr r8, [r5, #CNTL]
lsls r8, r8, #30
bpl.n stop_tx
wfifo_wait:
ldr r8, [r5, #CNTL]
lsls r8, r8, #25
bpl.n wfifo_wait
ldr r8, [r5, #CONF]
orr.w r8, r8, #XFER_STOP
str r8, [r5, #CONF]
xfer_start:
ldr r8, [r5, #CONF]
lsls r8, r8, #16
bmi.n xfer_start
ss_disable:
# Disable SS_EN
ldr r8, [r5, #CNTL]
bic.w r8, r8, #SS_EN
str r8, [r5, #CNTL]
wait:
ldr r8, [r5, #CNTL]
lsls r8, r8, #30
bpl.n wait
bx lr
error:
movs r0, #0
str r0, [r2, #4] /* set rp = 0 on error */
exit:
mov r0, r6
bkpt #0x00
.end

View File

@ -43,7 +43,8 @@ NOR_DRIVERS = \
kinetis.c \
mini51.c \
nuc1x.c \
nrf51.c
nrf51.c \
mrvlqspi.c
noinst_HEADERS = \
core.h \

View File

@ -56,6 +56,7 @@ extern struct flash_driver mdr_flash;
extern struct flash_driver mini51_flash;
extern struct flash_driver nuc1x_flash;
extern struct flash_driver nrf51_flash;
extern struct flash_driver mrvlqspi_flash;
/**
* The list of built-in flash drivers.
@ -96,6 +97,7 @@ static struct flash_driver *flash_drivers[] = {
&mini51_flash,
&nuc1x_flash,
&nrf51_flash,
&mrvlqspi_flash,
NULL,
};

960
src/flash/nor/mrvlqspi.c Normal file
View File

@ -0,0 +1,960 @@
/***************************************************************************
* Copyright (C) 2014 by Mahavir Jain <mjain@marvell.com> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
* *
***************************************************************************/
/*
* This is QSPI flash controller driver for Marvell's Wireless
* Microcontroller platform.
*
* For more information please refer,
* https://origin-www.marvell.com/microcontrollers/wi-fi-microcontroller-platform/
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "imp.h"
#include "spi.h"
#include <helper/binarybuffer.h>
#include <target/algorithm.h>
#include <target/armv7m.h>
#define QSPI_R_EN (0x0)
#define QSPI_W_EN (0x1)
#define QSPI_SS_DISABLE (0x0)
#define QSPI_SS_ENABLE (0x1)
#define WRITE_DISBALE (0x0)
#define WRITE_ENABLE (0x1)
#define QSPI_TIMEOUT (1000)
#define FIFO_FLUSH_TIMEOUT (1000)
#define BLOCK_ERASE_TIMEOUT (1000)
#define CHIP_ERASE_TIMEOUT (10000)
#define SS_EN (1 << 0)
#define XFER_RDY (1 << 1)
#define RFIFO_EMPTY (1 << 4)
#define WFIFO_EMPTY (1 << 6)
#define WFIFO_FULL (1 << 7)
#define FIFO_FLUSH (1 << 9)
#define RW_EN (1 << 13)
#define XFER_STOP (1 << 14)
#define XFER_START (1 << 15)
#define CONF_MASK (0x7)
#define CONF_OFFSET (10)
#define INS_WRITE_ENABLE 0x06
#define INS_WRITE_DISABLE 0x04
#define INS_READ_STATUS 0x05
#define INS_PAGE_PROGRAM 0x02
#define CNTL 0x0 /* QSPI_BASE + 0x0 */
#define CONF 0x4
#define DOUT 0x8
#define DIN 0xc
#define INSTR 0x10
#define ADDR 0x14
#define RDMODE 0x18
#define HDRCNT 0x1c
#define DINCNT 0x20
struct mrvlqspi_flash_bank {
int probed;
uint32_t reg_base;
uint32_t bank_num;
const struct flash_device *dev;
};
static inline uint32_t mrvlqspi_get_reg(struct flash_bank *bank, uint32_t reg)
{
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
return reg + mrvlqspi_info->reg_base;
}
static inline int mrvlqspi_set_din_cnt(struct flash_bank *bank, uint32_t count)
{
struct target *target = bank->target;
return target_write_u32(target, mrvlqspi_get_reg(bank, DINCNT), count);
}
static inline int mrvlqspi_set_addr(struct flash_bank *bank, uint32_t addr)
{
struct target *target = bank->target;
return target_write_u32(target, mrvlqspi_get_reg(bank, ADDR), addr);
}
static inline int mrvlqspi_set_instr(struct flash_bank *bank, uint32_t instr)
{
struct target *target = bank->target;
return target_write_u32(target, mrvlqspi_get_reg(bank, INSTR), instr);
}
static inline int mrvlqspi_set_hdr_cnt(struct flash_bank *bank, uint32_t hdr_cnt)
{
struct target *target = bank->target;
return target_write_u32(target, mrvlqspi_get_reg(bank, HDRCNT), hdr_cnt);
}
static int mrvlqspi_set_conf(struct flash_bank *bank, uint32_t conf_val)
{
int retval;
uint32_t regval;
struct target *target = bank->target;
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CONF), &regval);
if (retval != ERROR_OK)
return retval;
regval &= ~(CONF_MASK << CONF_OFFSET);
regval |= (conf_val << CONF_OFFSET);
return target_write_u32(target,
mrvlqspi_get_reg(bank, CONF), regval);
}
static int mrvlqspi_set_ss_state(struct flash_bank *bank, bool state, int timeout)
{
int retval;
uint32_t regval;
struct target *target = bank->target;
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CNTL), &regval);
if (retval != ERROR_OK)
return retval;
if (state)
regval |= SS_EN;
else
regval &= ~(SS_EN);
retval = target_write_u32(target,
mrvlqspi_get_reg(bank, CNTL), regval);
if (retval != ERROR_OK)
return retval;
/* wait for xfer_ready to set */
for (;;) {
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CNTL), &regval);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("status: 0x%x", regval);
if ((regval & XFER_RDY) == XFER_RDY)
break;
if (timeout-- <= 0) {
LOG_ERROR("timed out waiting for flash");
return ERROR_FAIL;
}
alive_sleep(1);
}
return ERROR_OK;
}
static int mrvlqspi_start_transfer(struct flash_bank *bank, bool rw_mode)
{
int retval;
uint32_t regval;
struct target *target = bank->target;
retval = mrvlqspi_set_ss_state(bank, QSPI_SS_ENABLE, QSPI_TIMEOUT);
if (retval != ERROR_OK)
return retval;
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CONF), &regval);
if (retval != ERROR_OK)
return retval;
if (rw_mode)
regval |= RW_EN;
else
regval &= ~(RW_EN);
regval |= XFER_START;
retval = target_write_u32(target,
mrvlqspi_get_reg(bank, CONF), regval);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
static int mrvlqspi_stop_transfer(struct flash_bank *bank)
{
int retval;
uint32_t regval;
struct target *target = bank->target;
int timeout = QSPI_TIMEOUT;
/* wait for xfer_ready and wfifo_empty to set */
for (;;) {
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CNTL), &regval);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("status: 0x%x", regval);
if ((regval & (XFER_RDY | WFIFO_EMPTY)) ==
(XFER_RDY | WFIFO_EMPTY))
break;
if (timeout-- <= 0) {
LOG_ERROR("timed out waiting for flash");
return ERROR_FAIL;
}
alive_sleep(1);
}
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CONF), &regval);
if (retval != ERROR_OK)
return retval;
regval |= XFER_STOP;
retval = target_write_u32(target,
mrvlqspi_get_reg(bank, CONF), regval);
if (retval != ERROR_OK)
return retval;
/* wait for xfer_start to reset */
for (;;) {
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CONF), &regval);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("status: 0x%x", regval);
if ((regval & XFER_START) == 0)
break;
if (timeout-- <= 0) {
LOG_ERROR("timed out waiting for flash");
return ERROR_FAIL;
}
alive_sleep(1);
}
retval = mrvlqspi_set_ss_state(bank, QSPI_SS_DISABLE, QSPI_TIMEOUT);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
static int mrvlqspi_fifo_flush(struct flash_bank *bank, int timeout)
{
int retval;
uint32_t val;
struct target *target = bank->target;
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CONF), &val);
if (retval != ERROR_OK)
return retval;
val |= FIFO_FLUSH;
retval = target_write_u32(target,
mrvlqspi_get_reg(bank, CONF), val);
if (retval != ERROR_OK)
return retval;
/* wait for fifo_flush to clear */
for (;;) {
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CONF), &val);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("status: 0x%x", val);
if ((val & FIFO_FLUSH) == 0)
break;
if (timeout-- <= 0) {
LOG_ERROR("timed out waiting for flash");
return ERROR_FAIL;
}
alive_sleep(1);
}
return ERROR_OK;
}
static int mrvlqspi_read_byte(struct flash_bank *bank, uint8_t *data)
{
int retval;
uint32_t val;
struct target *target = bank->target;
/* wait for rfifo_empty to reset */
for (;;) {
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, CNTL), &val);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("status: 0x%x", val);
if ((val & RFIFO_EMPTY) == 0)
break;
usleep(10);
}
retval = target_read_u32(target,
mrvlqspi_get_reg(bank, DIN), &val);
if (retval != ERROR_OK)
return retval;
*data = val & 0xFF;
return ERROR_OK;
}
static int mrvlqspi_flash_busy_status(struct flash_bank *bank, int timeout)
{
uint8_t val;
int retval;
/* Flush read/write fifo's */
retval = mrvlqspi_fifo_flush(bank, FIFO_FLUSH_TIMEOUT);
if (retval != ERROR_OK)
return retval;
/* Set instruction/addr count value */
retval = mrvlqspi_set_hdr_cnt(bank, 0x1);
if (retval != ERROR_OK)
return retval;
/* Read flash status register in continuous manner */
retval = mrvlqspi_set_din_cnt(bank, 0x0);
if (retval != ERROR_OK)
return retval;
/* Set instruction */
retval = mrvlqspi_set_instr(bank, INS_READ_STATUS);
if (retval != ERROR_OK)
return retval;
/* Set data and addr pin length */
retval = mrvlqspi_set_conf(bank, 0x0);
if (retval != ERROR_OK)
return retval;
/* Enable read mode transfer */
retval = mrvlqspi_start_transfer(bank, QSPI_R_EN);
if (retval != ERROR_OK)
return retval;
for (;;) {
retval = mrvlqspi_read_byte(bank, &val);
if (retval != ERROR_OK)
return retval;
if (!(val & 0x1))
break;
if (timeout-- <= 0) {
LOG_ERROR("timed out waiting for flash");
return ERROR_FAIL;
}
alive_sleep(1);
}
return mrvlqspi_stop_transfer(bank);
}
static int mrvlqspi_set_write_status(struct flash_bank *bank, bool mode)
{
int retval;
uint32_t instr;
/* Flush read/write fifo's */
retval = mrvlqspi_fifo_flush(bank, FIFO_FLUSH_TIMEOUT);
if (retval != ERROR_OK)
return retval;
/* Set instruction/addr count value */
retval = mrvlqspi_set_hdr_cnt(bank, 0x1);
if (retval != ERROR_OK)
return retval;
if (mode)
instr = INS_WRITE_ENABLE;
else
instr = INS_WRITE_DISABLE;
/* Set instruction */
retval = mrvlqspi_set_instr(bank, instr);
if (retval != ERROR_OK)
return retval;
retval = mrvlqspi_start_transfer(bank, QSPI_W_EN);
if (retval != ERROR_OK)
return retval;
retval = mrvlqspi_stop_transfer(bank);
if (retval != ERROR_OK)
return retval;
return retval;
}
static int mrvlqspi_read_id(struct flash_bank *bank, uint32_t *id)
{
uint8_t id_buf[3] = {0, 0, 0};
int retval, i;
LOG_DEBUG("Getting ID");
/* Flush read/write fifo's */
retval = mrvlqspi_fifo_flush(bank, FIFO_FLUSH_TIMEOUT);
if (retval != ERROR_OK)
return retval;
/* Set instruction/addr count value */
retval = mrvlqspi_set_hdr_cnt(bank, 0x1);
if (retval != ERROR_OK)
return retval;
/* Set count for number of bytes to read */
retval = mrvlqspi_set_din_cnt(bank, 0x3);
if (retval != ERROR_OK)
return retval;
/* Set instruction */
retval = mrvlqspi_set_instr(bank, SPIFLASH_READ_ID);
if (retval != ERROR_OK)
return retval;
/* Set data and addr pin length */
retval = mrvlqspi_set_conf(bank, 0x0);
if (retval != ERROR_OK)
return retval;
retval = mrvlqspi_start_transfer(bank, QSPI_R_EN);
if (retval != ERROR_OK)
return retval;
for (i = 0; i < 3; i++) {
retval = mrvlqspi_read_byte(bank, &id_buf[i]);
if (retval != ERROR_OK)
return retval;
}
LOG_DEBUG("ID is 0x%x 0x%x 0x%x", id_buf[0], id_buf[1], id_buf[2]);
retval = mrvlqspi_set_ss_state(bank, QSPI_SS_DISABLE, QSPI_TIMEOUT);
if (retval != ERROR_OK)
return retval;
*id = id_buf[2] << 16 | id_buf[1] << 8 | id_buf[0];
return ERROR_OK;
}
static int mrvlqspi_block_erase(struct flash_bank *bank, uint32_t offset)
{
int retval;
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
/* Set flash write enable */
retval = mrvlqspi_set_write_status(bank, WRITE_ENABLE);
if (retval != ERROR_OK)
return retval;
/* Set instruction/addr count value */
retval = mrvlqspi_set_hdr_cnt(bank, (0x1 | (0x3 << 4)));
if (retval != ERROR_OK)
return retval;
/* Set read offset address */
retval = mrvlqspi_set_addr(bank, offset);
if (retval != ERROR_OK)
return retval;
/* Set instruction */
retval = mrvlqspi_set_instr(bank, mrvlqspi_info->dev->erase_cmd);
if (retval != ERROR_OK)
return retval;
retval = mrvlqspi_start_transfer(bank, QSPI_W_EN);
if (retval != ERROR_OK)
return retval;
retval = mrvlqspi_stop_transfer(bank);
if (retval != ERROR_OK)
return retval;
return mrvlqspi_flash_busy_status(bank, BLOCK_ERASE_TIMEOUT);
}
static int mrvlqspi_bulk_erase(struct flash_bank *bank)
{
int retval;
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
/* Set flash write enable */
retval = mrvlqspi_set_write_status(bank, WRITE_ENABLE);
if (retval != ERROR_OK)
return retval;
/* Set instruction */
retval = mrvlqspi_set_instr(bank, mrvlqspi_info->dev->chip_erase_cmd);
if (retval != ERROR_OK)
return retval;
retval = mrvlqspi_start_transfer(bank, QSPI_W_EN);
if (retval != ERROR_OK)
return retval;
retval = mrvlqspi_stop_transfer(bank);
if (retval != ERROR_OK)
return retval;
return mrvlqspi_flash_busy_status(bank, CHIP_ERASE_TIMEOUT);
}
static int mrvlqspi_flash_erase(struct flash_bank *bank, int first, int last)
{
struct target *target = bank->target;
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
int retval = ERROR_OK;
int sector;
LOG_DEBUG("erase from sector %d to sector %d", first, last);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if ((first < 0) || (last < first) || (last >= bank->num_sectors)) {
LOG_ERROR("Flash sector invalid");
return ERROR_FLASH_SECTOR_INVALID;
}
if (!(mrvlqspi_info->probed)) {
LOG_ERROR("Flash bank not probed");
return ERROR_FLASH_BANK_NOT_PROBED;
}
for (sector = first; sector <= last; sector++) {
if (bank->sectors[sector].is_protected) {
LOG_ERROR("Flash sector %d protected", sector);
return ERROR_FAIL;
}
}
/* If we're erasing the entire chip and the flash supports
* it, use a bulk erase instead of going sector-by-sector. */
if (first == 0 && last == (bank->num_sectors - 1)
&& mrvlqspi_info->dev->chip_erase_cmd !=
mrvlqspi_info->dev->erase_cmd) {
LOG_DEBUG("Chip supports the bulk erase command."\
" Will use bulk erase instead of sector-by-sector erase.");
retval = mrvlqspi_bulk_erase(bank);
if (retval == ERROR_OK) {
return retval;
} else
LOG_WARNING("Bulk flash erase failed."
" Falling back to sector-by-sector erase.");
}
for (sector = first; sector <= last; sector++) {
retval = mrvlqspi_block_erase(bank,
sector * mrvlqspi_info->dev->sectorsize);
if (retval != ERROR_OK)
return retval;
}
return retval;
}
static int mrvlqspi_flash_write(struct flash_bank *bank, const uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
int retval = ERROR_OK;
uint32_t page_size, fifo_size;
struct working_area *fifo;
struct reg_param reg_params[6];
struct armv7m_algorithm armv7m_info;
struct working_area *write_algorithm;
int sector;
LOG_DEBUG("offset=0x%08" PRIx32 " count=0x%08" PRIx32,
offset, count);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (offset + count > mrvlqspi_info->dev->size_in_bytes) {
LOG_WARNING("Writes past end of flash. Extra data discarded.");
count = mrvlqspi_info->dev->size_in_bytes - offset;
}
/* Check sector protection */
for (sector = 0; sector < bank->num_sectors; sector++) {
/* Start offset in or before this sector? */
/* End offset in or behind this sector? */
if ((offset <
(bank->sectors[sector].offset + bank->sectors[sector].size))
&& ((offset + count - 1) >= bank->sectors[sector].offset)
&& bank->sectors[sector].is_protected) {
LOG_ERROR("Flash sector %d protected", sector);
return ERROR_FAIL;
}
}
page_size = mrvlqspi_info->dev->pagesize;
/* See contrib/loaders/flash/mrvlqspi.S for src */
static const uint8_t mrvlqspi_flash_write_code[] = {
0x4f, 0xf0, 0x00, 0x0a, 0xa2, 0x44, 0x92, 0x45,
0x7f, 0xf6, 0xfc, 0xaf, 0x00, 0xf0, 0x6b, 0xf8,
0x5f, 0xf0, 0x01, 0x08, 0xc5, 0xf8, 0x1c, 0x80,
0x5f, 0xf0, 0x06, 0x08, 0xc5, 0xf8, 0x10, 0x80,
0x5f, 0xf0, 0x01, 0x09, 0x00, 0xf0, 0x6b, 0xf8,
0x00, 0xf0, 0x7d, 0xf8, 0x5f, 0xf0, 0x31, 0x08,
0xc5, 0xf8, 0x1c, 0x80, 0x90, 0x46, 0xc5, 0xf8,
0x14, 0x80, 0x5f, 0xf0, 0x02, 0x08, 0xc5, 0xf8,
0x10, 0x80, 0x5f, 0xf0, 0x01, 0x09, 0x00, 0xf0,
0x5a, 0xf8, 0xd0, 0xf8, 0x00, 0x80, 0xb8, 0xf1,
0x00, 0x0f, 0x00, 0xf0, 0x8b, 0x80, 0x47, 0x68,
0x47, 0x45, 0x3f, 0xf4, 0xf6, 0xaf, 0x17, 0xf8,
0x01, 0x9b, 0x00, 0xf0, 0x30, 0xf8, 0x8f, 0x42,
0x28, 0xbf, 0x00, 0xf1, 0x08, 0x07, 0x47, 0x60,
0x01, 0x3b, 0x00, 0x2b, 0x00, 0xf0, 0x05, 0x80,
0x02, 0xf1, 0x01, 0x02, 0x92, 0x45, 0x7f, 0xf4,
0xe4, 0xaf, 0x00, 0xf0, 0x50, 0xf8, 0xa2, 0x44,
0x00, 0xf0, 0x2d, 0xf8, 0x5f, 0xf0, 0x01, 0x08,
0xc5, 0xf8, 0x1c, 0x80, 0x5f, 0xf0, 0x00, 0x08,
0xc5, 0xf8, 0x20, 0x80, 0x5f, 0xf0, 0x05, 0x08,
0xc5, 0xf8, 0x10, 0x80, 0x5f, 0xf0, 0x00, 0x09,
0x00, 0xf0, 0x29, 0xf8, 0x00, 0xf0, 0x13, 0xf8,
0x09, 0xf0, 0x01, 0x09, 0xb9, 0xf1, 0x00, 0x0f,
0xf8, 0xd1, 0x00, 0xf0, 0x34, 0xf8, 0x00, 0x2b,
0xa4, 0xd1, 0x00, 0xf0, 0x53, 0xb8, 0xd5, 0xf8,
0x00, 0x80, 0x5f, 0xea, 0x08, 0x68, 0xfa, 0xd4,
0xc5, 0xf8, 0x08, 0x90, 0x70, 0x47, 0xd5, 0xf8,
0x00, 0x80, 0x5f, 0xea, 0xc8, 0x68, 0xfa, 0xd4,
0xd5, 0xf8, 0x0c, 0x90, 0x70, 0x47, 0xd5, 0xf8,
0x04, 0x80, 0x48, 0xf4, 0x00, 0x78, 0xc5, 0xf8,
0x04, 0x80, 0xd5, 0xf8, 0x04, 0x80, 0x5f, 0xea,
0x88, 0x58, 0xfa, 0xd4, 0x70, 0x47, 0xd5, 0xf8,
0x00, 0x80, 0x48, 0xf0, 0x01, 0x08, 0xc5, 0xf8,
0x00, 0x80, 0xd5, 0xf8, 0x00, 0x80, 0x5f, 0xea,
0x88, 0x78, 0xfa, 0xd5, 0xd5, 0xf8, 0x04, 0x80,
0x69, 0xf3, 0x4d, 0x38, 0x48, 0xf4, 0x00, 0x48,
0xc5, 0xf8, 0x04, 0x80, 0x70, 0x47, 0xd5, 0xf8,
0x00, 0x80, 0x5f, 0xea, 0x88, 0x78, 0xfa, 0xd5,
0xd5, 0xf8, 0x00, 0x80, 0x5f, 0xea, 0x48, 0x68,
0xfa, 0xd5, 0xd5, 0xf8, 0x04, 0x80, 0x48, 0xf4,
0x80, 0x48, 0xc5, 0xf8, 0x04, 0x80, 0xd5, 0xf8,
0x04, 0x80, 0x5f, 0xea, 0x08, 0x48, 0xfa, 0xd4,
0xd5, 0xf8, 0x00, 0x80, 0x28, 0xf0, 0x01, 0x08,
0xc5, 0xf8, 0x00, 0x80, 0xd5, 0xf8, 0x00, 0x80,
0x5f, 0xea, 0x88, 0x78, 0xfa, 0xd5, 0x70, 0x47,
0x00, 0x20, 0x50, 0x60, 0x30, 0x46, 0x00, 0xbe
};
if (target_alloc_working_area(target, sizeof(mrvlqspi_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_ERROR("Insufficient working area. You must configure"\
" a working area > %zdB in order to write to SPIFI flash.",
sizeof(mrvlqspi_flash_write_code));
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
retval = target_write_buffer(target, write_algorithm->address,
sizeof(mrvlqspi_flash_write_code),
mrvlqspi_flash_write_code);
if (retval != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return retval;
}
/* FIFO allocation */
fifo_size = target_get_working_area_avail(target);
if (fifo_size == 0) {
/* if we already allocated the writing code but failed to get fifo
* space, free the algorithm */
target_free_working_area(target, write_algorithm);
LOG_ERROR("Insufficient working area. Please allocate at least"\
" %zdB of working area to enable flash writes.",
sizeof(mrvlqspi_flash_write_code) + 1
);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
} else if (fifo_size < page_size)
LOG_WARNING("Working area size is limited; flash writes may be"\
" slow. Increase working area size to at least %zdB"\
" to reduce write times.",
(size_t)(sizeof(mrvlqspi_flash_write_code) + page_size)
);
if (target_alloc_working_area(target, fifo_size, &fifo) != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(&reg_params[0], "r0", 32, PARAM_IN_OUT); /* buffer start, status (out) */
init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT); /* buffer end */
init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT); /* target address */
init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT); /* count (halfword-16bit) */
init_reg_param(&reg_params[4], "r4", 32, PARAM_OUT); /* page size */
init_reg_param(&reg_params[5], "r5", 32, PARAM_OUT); /* qspi base address */
buf_set_u32(reg_params[0].value, 0, 32, fifo->address);
buf_set_u32(reg_params[1].value, 0, 32, fifo->address + fifo->size);
buf_set_u32(reg_params[2].value, 0, 32, offset);
buf_set_u32(reg_params[3].value, 0, 32, count);
buf_set_u32(reg_params[4].value, 0, 32, page_size);
buf_set_u32(reg_params[5].value, 0, 32, (uint32_t) mrvlqspi_info->reg_base);
retval = target_run_flash_async_algorithm(target, buffer, count, 1,
0, NULL,
6, reg_params,
fifo->address, fifo->size,
write_algorithm->address, 0,
&armv7m_info
);
if (retval != ERROR_OK)
LOG_ERROR("Error executing flash write algorithm");
target_free_working_area(target, fifo);
target_free_working_area(target, write_algorithm);
destroy_reg_param(&reg_params[0]);
destroy_reg_param(&reg_params[1]);
destroy_reg_param(&reg_params[2]);
destroy_reg_param(&reg_params[3]);
destroy_reg_param(&reg_params[4]);
destroy_reg_param(&reg_params[5]);
return retval;
}
int mrvlqspi_flash_read(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
int retval;
uint32_t i;
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (!(mrvlqspi_info->probed)) {
LOG_ERROR("Flash bank not probed");
return ERROR_FLASH_BANK_NOT_PROBED;
}
/* Flush read/write fifo's */
retval = mrvlqspi_fifo_flush(bank, FIFO_FLUSH_TIMEOUT);
if (retval != ERROR_OK)
return retval;
/* Set instruction/addr count value */
retval = mrvlqspi_set_hdr_cnt(bank, (0x1 | (0x3 << 4)));
if (retval != ERROR_OK)
return retval;
/* Set count for number of bytes to read */
retval = mrvlqspi_set_din_cnt(bank, count);
if (retval != ERROR_OK)
return retval;
/* Set read address */
retval = mrvlqspi_set_addr(bank, offset);
if (retval != ERROR_OK)
return retval;
/* Set instruction */
retval = mrvlqspi_set_instr(bank, SPIFLASH_READ);
if (retval != ERROR_OK)
return retval;
/* Set data and addr pin length */
retval = mrvlqspi_set_conf(bank, 0x0);
if (retval != ERROR_OK)
return retval;
retval = mrvlqspi_start_transfer(bank, QSPI_R_EN);
if (retval != ERROR_OK)
return retval;
for (i = 0; i < count; i++) {
retval = mrvlqspi_read_byte(bank, &buffer[i]);
if (retval != ERROR_OK)
return retval;
}
retval = mrvlqspi_set_ss_state(bank, QSPI_SS_DISABLE, QSPI_TIMEOUT);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
static int mrvlqspi_probe(struct flash_bank *bank)
{
struct target *target = bank->target;
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
uint32_t id = 0;
int retval;
struct flash_sector *sectors;
/* If we've already probed, we should be fine to skip this time. */
if (mrvlqspi_info->probed)
return ERROR_OK;
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
mrvlqspi_info->probed = 0;
mrvlqspi_info->bank_num = bank->bank_number;
/* Read flash JEDEC ID */
retval = mrvlqspi_read_id(bank, &id);
if (retval != ERROR_OK)
return retval;
mrvlqspi_info->dev = NULL;
for (const struct flash_device *p = flash_devices; p->name ; p++)
if (p->device_id == id) {
mrvlqspi_info->dev = p;
break;
}
if (!mrvlqspi_info->dev) {
LOG_ERROR("Unknown flash device ID 0x%08x", id);
return ERROR_FAIL;
}
LOG_INFO("Found flash device \'%s\' ID 0x%08x",
mrvlqspi_info->dev->name, mrvlqspi_info->dev->device_id);
/* Set correct size value */
bank->size = mrvlqspi_info->dev->size_in_bytes;
/* create and fill sectors array */
bank->num_sectors = mrvlqspi_info->dev->size_in_bytes /
mrvlqspi_info->dev->sectorsize;
sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
if (sectors == NULL) {
LOG_ERROR("not enough memory");
return ERROR_FAIL;
}
for (int sector = 0; sector < bank->num_sectors; sector++) {
sectors[sector].offset =
sector * mrvlqspi_info->dev->sectorsize;
sectors[sector].size = mrvlqspi_info->dev->sectorsize;
sectors[sector].is_erased = -1;
sectors[sector].is_protected = 0;
}
bank->sectors = sectors;
mrvlqspi_info->probed = 1;
return ERROR_OK;
}
static int mrvlqspi_auto_probe(struct flash_bank *bank)
{
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
if (mrvlqspi_info->probed)
return ERROR_OK;
return mrvlqspi_probe(bank);
}
static int mrvlqspi_flash_erase_check(struct flash_bank *bank)
{
/* Not implemented yet */
return ERROR_OK;
}
static int mrvlqspi_protect_check(struct flash_bank *bank)
{
/* Not implemented yet */
return ERROR_OK;
}
int mrvlqspi_get_info(struct flash_bank *bank, char *buf, int buf_size)
{
struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
if (!(mrvlqspi_info->probed)) {
snprintf(buf, buf_size,
"\nQSPI flash bank not probed yet\n");
return ERROR_OK;
}
snprintf(buf, buf_size, "\nQSPI flash information:\n"
" Device \'%s\' ID 0x%08x\n",
mrvlqspi_info->dev->name, mrvlqspi_info->dev->device_id);
return ERROR_OK;
}
FLASH_BANK_COMMAND_HANDLER(mrvlqspi_flash_bank_command)
{
struct mrvlqspi_flash_bank *mrvlqspi_info;
if (CMD_ARGC < 7)
return ERROR_COMMAND_SYNTAX_ERROR;
mrvlqspi_info = malloc(sizeof(struct mrvlqspi_flash_bank));
if (mrvlqspi_info == NULL) {
LOG_ERROR("not enough memory");
return ERROR_FAIL;
}
/* Get QSPI controller register map base address */
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[6], mrvlqspi_info->reg_base);
bank->driver_priv = mrvlqspi_info;
mrvlqspi_info->probed = 0;
return ERROR_OK;
}
struct flash_driver mrvlqspi_flash = {
.name = "mrvlqspi",
.flash_bank_command = mrvlqspi_flash_bank_command,
.erase = mrvlqspi_flash_erase,
.protect = NULL,
.write = mrvlqspi_flash_write,
.read = mrvlqspi_flash_read,
.probe = mrvlqspi_probe,
.auto_probe = mrvlqspi_auto_probe,
.erase_check = mrvlqspi_flash_erase_check,
.protect_check = mrvlqspi_protect_check,
.info = mrvlqspi_get_info,
};