Remove remaining references to FTD2XX driver
This includes a USB blaster configuration that only worked with that low-level access and some obsolete build-tests. Change-Id: I53d27cbf782ebbd131b1af25e358adf35f2b4500 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6660 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This commit is contained in:
Andreas Fritiofson
Antonio Borneo
parent
6fef2eca38
commit
4afd8852bb
|
|
@ -2459,7 +2459,7 @@ This driver is for adapters using the MPSSE (Multi-Protocol Synchronous Serial
|
|||
Engine) mode built into many FTDI chips, such as the FT2232, FT4232 and FT232H.
|
||||
|
||||
The driver is using libusb-1.0 in asynchronous mode to talk to the FTDI device,
|
||||
bypassing intermediate libraries like libftdi or D2XX.
|
||||
bypassing intermediate libraries like libftdi.
|
||||
|
||||
Support for new FTDI based adapters can be added completely through
|
||||
configuration files, without the need to patch and rebuild OpenOCD.
|
||||
|
|
@ -2728,13 +2728,6 @@ USB JTAG/USB-Blaster compatibles over one of the userspace libraries
|
|||
for FTDI chips. These interfaces have several commands, used to
|
||||
configure the driver before initializing the JTAG scan chain:
|
||||
|
||||
@deffn {Config Command} {usb_blaster device_desc} description
|
||||
Provides the USB device description (the @emph{iProduct string})
|
||||
of the FTDI FT245 device. If not
|
||||
specified, the FTDI default value is used. This setting is only valid
|
||||
if compiled with FTD2XX support.
|
||||
@end deffn
|
||||
|
||||
@deffn {Config Command} {usb_blaster vid_pid} vid pid
|
||||
The vendor ID and product ID of the FTDI FT245 device. If not specified,
|
||||
default values are used.
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/*******************************************************************************
|
||||
* Driver for OpenJTAG Project (www.openjtag.org) *
|
||||
* Compatible with libftdi and ftd2xx drivers. *
|
||||
* Compatible with libftdi drivers. *
|
||||
* *
|
||||
* Cypress CY7C65215 support *
|
||||
* Copyright (C) 2015 Vianney le Clément de Saint-Marcq, Essensium NV *
|
||||
|
|
|
|||
|
|
@ -36,7 +36,6 @@ struct ublast_lowlevel {
|
|||
uint16_t ublast_pid;
|
||||
uint16_t ublast_vid_uninit;
|
||||
uint16_t ublast_pid_uninit;
|
||||
char *ublast_device_desc;
|
||||
struct libusb_device_handle *libusb_dev;
|
||||
char *firmware_path;
|
||||
|
||||
|
|
|
|||
|
|
@ -119,7 +119,6 @@ struct ublast_info {
|
|||
|
||||
char *lowlevel_name;
|
||||
struct ublast_lowlevel *drv;
|
||||
char *ublast_device_desc;
|
||||
uint16_t ublast_vid, ublast_pid;
|
||||
uint16_t ublast_vid_uninit, ublast_pid_uninit;
|
||||
int flags;
|
||||
|
|
@ -140,7 +139,7 @@ static struct ublast_info info = {
|
|||
};
|
||||
|
||||
/*
|
||||
* Available lowlevel drivers (FTDI, FTD2xx, ...)
|
||||
* Available lowlevel drivers (FTDI, libusb, ...)
|
||||
*/
|
||||
struct drvs_map {
|
||||
char *name;
|
||||
|
|
@ -874,7 +873,6 @@ static int ublast_init(void)
|
|||
info.drv->ublast_pid = info.ublast_pid;
|
||||
info.drv->ublast_vid_uninit = info.ublast_vid_uninit;
|
||||
info.drv->ublast_pid_uninit = info.ublast_pid_uninit;
|
||||
info.drv->ublast_device_desc = info.ublast_device_desc;
|
||||
info.drv->firmware_path = info.firmware_path;
|
||||
|
||||
info.flags |= info.drv->flags;
|
||||
|
|
@ -908,16 +906,6 @@ static int ublast_quit(void)
|
|||
return info.drv->close(info.drv);
|
||||
}
|
||||
|
||||
COMMAND_HANDLER(ublast_handle_device_desc_command)
|
||||
{
|
||||
if (CMD_ARGC != 1)
|
||||
return ERROR_COMMAND_SYNTAX_ERROR;
|
||||
|
||||
info.ublast_device_desc = strdup(CMD_ARGV[0]);
|
||||
|
||||
return ERROR_OK;
|
||||
}
|
||||
|
||||
COMMAND_HANDLER(ublast_handle_vid_pid_command)
|
||||
{
|
||||
if (CMD_ARGC > 4) {
|
||||
|
|
@ -1031,13 +1019,6 @@ COMMAND_HANDLER(ublast_firmware_command)
|
|||
|
||||
|
||||
static const struct command_registration ublast_subcommand_handlers[] = {
|
||||
{
|
||||
.name = "device_desc",
|
||||
.handler = ublast_handle_device_desc_command,
|
||||
.mode = COMMAND_CONFIG,
|
||||
.help = "set the USB device description of the USB-Blaster",
|
||||
.usage = "description-string",
|
||||
},
|
||||
{
|
||||
.name = "vid_pid",
|
||||
.handler = ublast_handle_vid_pid_command,
|
||||
|
|
|
|||
|
|
@ -1,95 +0,0 @@
|
|||
# -*- mode: makefile -*-
|
||||
#
|
||||
default: _complain_
|
||||
include ./local.uses
|
||||
|
||||
%: _complain_
|
||||
|
||||
|
||||
_complain_:
|
||||
@echo ""
|
||||
@echo " Try the target: cygwin.buildtest or linux.buildtest "
|
||||
@echo ""
|
||||
|
||||
remove.install:
|
||||
rm -rf ${INSTALL_DIR}
|
||||
|
||||
.PHONY: remove.install
|
||||
|
||||
cygwin.buildtest:
|
||||
${MAKE} -f Makefile.ftd2xx clean all
|
||||
${MAKE} -f Makefile.openocd cygwin.easy.permutations
|
||||
${MAKE} -f Makefile.openocd mingw32.easy.permutations
|
||||
${MAKE} -f Makefile.libftdi all
|
||||
${MAKE} -f Makefile.openocd cygwin.libftdi
|
||||
|
||||
linux.buildtest:
|
||||
${MAKE} linux.easy.buildtest
|
||||
${MAKE} linux.ftd2xx_installed
|
||||
${MAKE} linux.ft2232_libftdi
|
||||
@echo ""
|
||||
@echo ""
|
||||
@echo "========================================"
|
||||
@echo " Linux Build Tests Complete "
|
||||
@echo "========================================"
|
||||
@echo ""
|
||||
@echo ""
|
||||
|
||||
|
||||
linux.easy.buildtest:
|
||||
@test -d openocd || (echo "Where the source to openocd?" && exit 1)
|
||||
${MAKE} -f Makefile.openocd bootstrap
|
||||
${MAKE} -f Makefile.ftd2xx all
|
||||
${MAKE} -f Makefile.openocd linux.easy.permutations
|
||||
|
||||
linux.ftd2xx_installed:
|
||||
${MAKE} remove.install
|
||||
${MAKE} linux.ftd2xx_installed.setup
|
||||
${MAKE} -f Makefile.openocd $@
|
||||
|
||||
linux.ft2232_libftdi:
|
||||
${MAKE} remove.install
|
||||
${MAKE} -f Makefile.libusb all
|
||||
${MAKE} -f Makefile.confuse all
|
||||
${MAKE} -f Makefile.libftdi all
|
||||
${MAKE} -f Makefile.openocd $@
|
||||
|
||||
# This target is used to "install" files from
|
||||
# the FTDICHIP.COM tar.gz unpack directory
|
||||
# into "a proper place" - where they should be found.
|
||||
linux.ftd2xx_installed.setup:
|
||||
mkdir -p ${INSTALL_DIR}/include
|
||||
mkdir -p ${EXEC_PREFIX}/lib
|
||||
@#
|
||||
@# Sanity check - make sure the .H file is findable
|
||||
@#
|
||||
@f=$(FTD2XX_LINUX_DIR)/ftd2xx.h && \
|
||||
test -f $$f || (echo "Error: $$f not found" ; exit 1)
|
||||
@#
|
||||
@# Header files are simple... just copy them.
|
||||
@#
|
||||
cp $(FTD2XX_LINUX_DIR)/ftd2xx.h $(PREFIX)/include/.
|
||||
cp $(FTD2XX_LINUX_DIR)/WinTypes.h $(PREFIX)/include/.
|
||||
@#
|
||||
@# .SO files are harder.
|
||||
@# (1) copy them, (2) make links
|
||||
@#
|
||||
cp $(FTD2XX_LINUX_DIR)/libftd2xx.so.$(FTD2XX_LINUX_VERSION) $(EXEC_PREFIX)/lib/.
|
||||
cd $(EXEC_PREFIX)/lib && rm -f libftd2xx.so.0
|
||||
cd $(EXEC_PREFIX)/lib && ln -s libftd2xx.so.$(FTD2XX_LINUX_VERSION) libftd2xx.so.0
|
||||
cd $(EXEC_PREFIX)/lib && rm -f libftd2xx.so
|
||||
cd $(EXEC_PREFIX)/lib && ln -s libftd2xx.so.$(FTD2XX_LINUX_VERSION) libftd2xx.so
|
||||
|
||||
|
||||
all.download:
|
||||
mkdir -p ${VIRGINS}
|
||||
${MAKE} -f Makefile.confuse download
|
||||
${MAKE} -f Makefile.libftdi download
|
||||
${MAKE} -f Makefile.ftd2xx download
|
||||
${MAKE} -f Makefile.libusb download
|
||||
|
||||
.PHONY: linux.buildtest \
|
||||
linux.easy.buildtest \
|
||||
linux.ftd2xx_installed \
|
||||
linux.ft22232_libftdi \
|
||||
linux.ftd2xx_installed.setup
|
||||
|
|
@ -1,46 +0,0 @@
|
|||
# -*- mode: makefile -*-
|
||||
default: _complain_
|
||||
include ./local.uses
|
||||
|
||||
TARFILE_LOCAL=${VIRGINS}/confuse-${LIBCONFUSE_VERSION}.tar.gz
|
||||
TARFILE_URL =http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/confuse-${LIBCONFUSE_VERSION}.tar.gz
|
||||
|
||||
CONFUSE_SRC_DIR =${HERE}/confuse-${LIBCONFUSE_VERSION}
|
||||
CONFUSE_BUILD_DIR =${HERE}/confuse-build
|
||||
|
||||
download:
|
||||
wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
|
||||
|
||||
unpack:
|
||||
rm -rf ${CONFUSE_SRC_DIR}
|
||||
tar xfz ${TARFILE_LOCAL}
|
||||
|
||||
clean::
|
||||
rm -rf ${CONFUSE_SRC_DIR}
|
||||
|
||||
configure:
|
||||
rm -rf ${CONFUSE_BUILD_DIR}
|
||||
mkdir ${CONFUSE_BUILD_DIR}
|
||||
cd ${CONFUSE_BUILD_DIR} && ${CONFUSE_SRC_DIR}/configure \
|
||||
--prefix=${PREFIX} \
|
||||
--exec-prefix=${EXEC_PREFIX}
|
||||
|
||||
clean::
|
||||
rm -rf ${CONFUSE_BUILD_DIR}
|
||||
|
||||
build:
|
||||
cd ${CONFUSE_BUILD_DIR} && ${MAKE}
|
||||
|
||||
install:
|
||||
cd ${CONFUSE_BUILD_DIR} && ${MAKE} install
|
||||
|
||||
all: unpack configure build install
|
||||
|
||||
_complain_:
|
||||
@echo ""
|
||||
@echo "Please try one of these targets: bootstrap, clean, configure, build, install"
|
||||
@echo " Or read the makefile and learn about the permutation test targets"
|
||||
@echo ""
|
||||
@echo "You also might find the download and unpack targets helpful."
|
||||
@echo ""
|
||||
@exit 1
|
||||
|
|
@ -1,88 +0,0 @@
|
|||
# -*- mode: makefile -*-
|
||||
#
|
||||
default: _complain_
|
||||
|
||||
include ./local.uses
|
||||
|
||||
# WARNING... the file on the ftdi chip site has a SPACE in the filename GRRR!!!
|
||||
# We fix that with the "-O" option to wget.
|
||||
ZIPFILE_LOCAL=${VIRGINS}/cdm.${FTD2XX_WIN32_VERSION}.zip
|
||||
ZIPFILE_URL ="http://www.ftdichip.com/Drivers/CDM/CDM ${FTD2XX_WIN32_VERSION}.zip"
|
||||
|
||||
TARFILE_LOCAL=${VIRGINS}/libftd2xx${FTD2XX_LINUX_VERSION}.tar.gz
|
||||
TARFILE_URL =http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx${FTD2XX_LINUX_VERSION}.tar.gz
|
||||
|
||||
TARFILE_64_LOCAL=${VIRGINS}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64.tar.gz
|
||||
TARFILE_64_URL =http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64.tar.gz
|
||||
|
||||
|
||||
download.win32:
|
||||
mkdir -p ${VIRGINS}
|
||||
wget -O ${ZIPFILE_LOCAL} ${ZIPFILE_URL}
|
||||
|
||||
unpack.win32:
|
||||
rm -rf ${FTD2XX_WIN32_DIR}
|
||||
mkdir -p ${FTD2XX_WIN32_DIR}
|
||||
cd ${FTD2XX_WIN32_DIR} && unzip ${ZIPFILE_LOCAL}
|
||||
|
||||
clean::
|
||||
rm -rf ${FTD2XX_WIN32_DIR}
|
||||
|
||||
download.linux:
|
||||
mkdir -p ${VIRGINS}
|
||||
wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
|
||||
|
||||
clean::
|
||||
rm -rf ${FTD2XX_LINUX_DIR}
|
||||
|
||||
unpack.linux:
|
||||
rm -rf ${FTD2XX_LINUX_DIR}
|
||||
mkdir -p ${FTD2XX_LINUX_DIR}
|
||||
tar xfz ${TARFILE_LOCAL}
|
||||
|
||||
download.linux.x86_64:
|
||||
mkdir -p ${VIRGINS}
|
||||
wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
|
||||
|
||||
unpack.linux.x86_64:
|
||||
rm -rf ${FTD2XX_LINUX_64_DIR}
|
||||
mkdir -p ${FTD2XX_LINUX_64_DIR}
|
||||
tar xfz ${TARFILE_64_LOCAL}
|
||||
|
||||
clean::
|
||||
rm -rf ${FTD2XX_LINUX_64_DIR}
|
||||
|
||||
download: download.win32 download.linux
|
||||
|
||||
unpack.cygwin unpack.mingw32: unpack.win32
|
||||
|
||||
unpack: unpack.${BUILD_SYSNAME}
|
||||
|
||||
# Nothing to do here
|
||||
build:
|
||||
@echo "Done"
|
||||
|
||||
#Nothing to do here
|
||||
configure:
|
||||
@echo "Done"
|
||||
|
||||
# Nothing to do here
|
||||
install:
|
||||
@echo "Done"
|
||||
|
||||
all: unpack configure build install
|
||||
|
||||
.PHONY: install
|
||||
|
||||
# Nothing to do here
|
||||
clean::
|
||||
@echo "Done"
|
||||
|
||||
_complain_:
|
||||
@echo ""
|
||||
@echo "Please try one of these targets: bootstrap, clean, configure, build, install"
|
||||
@echo " Or read the makefile and learn about the permutation test targets"
|
||||
@echo ""
|
||||
@echo "You also might find the download and unpack targets helpful."
|
||||
@echo ""
|
||||
@exit 1
|
||||
|
|
@ -1,51 +0,0 @@
|
|||
# -*- mode: makefile -*-
|
||||
default: _complain_
|
||||
include ./local.uses
|
||||
|
||||
TARFILE_LOCAL = ${VIRGINS}/libftdi-${LIBFTDI_VERSION}.tar.gz
|
||||
TARFILE_URL = http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${LIBFTDI_VERSION}.tar.gz
|
||||
|
||||
LIBFTDI_SRC_DIR = ${HERE}/libftdi-${LIBFTDI_VERSION}
|
||||
LIBFTDI_BUILD_DIR= ${HERE}/libftdi-build
|
||||
|
||||
download:
|
||||
mkdir -p virgins
|
||||
wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBFTDI_SRC_DIR}
|
||||
|
||||
unpack:
|
||||
tar xf ${TARFILE_LOCAL}
|
||||
|
||||
PATH := ${EXEC_PREFIX}/bin:${PATH}
|
||||
export PATH
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBFTDI_BUILD_DIR}
|
||||
|
||||
configure:
|
||||
rm -rf ${LIBFTDI_BUILD_DIR}
|
||||
mkdir -p ${LIBFTDI_BUILD_DIR}
|
||||
cd ${LIBFTDI_BUILD_DIR} && ${LIBFTDI_SRC_DIR}/configure \
|
||||
--prefix=${PREFIX} \
|
||||
--exec-prefix=${EXEC_PREFIX}
|
||||
|
||||
build:
|
||||
cd ${LIBFTDI_BUILD_DIR} && ${MAKE}
|
||||
|
||||
install:
|
||||
cd ${LIBFTDI_BUILD_DIR} && ${MAKE} install
|
||||
|
||||
all: unpack configure build install
|
||||
|
||||
.PHONY: install
|
||||
|
||||
_complain_:
|
||||
@echo ""
|
||||
@echo "Please try one of these targets: bootstrap, clean, configure, build, install"
|
||||
@echo " Or read the makefile and learn about the permutation test targets"
|
||||
@echo ""
|
||||
@echo "You also might find the download and unpack targets helpful."
|
||||
@echo ""
|
||||
@exit 1
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
# -*- mode: makefile -*-
|
||||
default: _complain_
|
||||
|
||||
include ./local.uses
|
||||
|
||||
ifeq (x"$BUILD_SYSNAME",x"cygwin")
|
||||
$(error Please use the Win32 specific port of LibUSB not the Unix version)
|
||||
endif
|
||||
ifeq (x"$BUILD_SYSNAME",x"mingw32")
|
||||
$(error Please use the win32 specific port of LibUSB not the Unix version)
|
||||
endif
|
||||
|
||||
TARFILE_LOCAL = ${VIRGINS}/libusb-${LIBUSB_VERSION_linux}.tar.bz2
|
||||
TARFILE_URL = http://downloads.sourceforge.net/libusb/libusb-${LIBUSB_VERSION_linux}.tar.gz
|
||||
|
||||
LIBUSB_SRC_DIR = ${HERE}/libusb-${LIBUSB_VERSION}
|
||||
LIBUSB_BUILD_DIR = ${HERE}/libusb-build
|
||||
|
||||
download:
|
||||
wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
|
||||
|
||||
unpack:
|
||||
rm -rf ${LIBUSB_SRC_DIR}
|
||||
tar xfz ${TARFILE_LOCAL}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBUSB_SRC_DIR}
|
||||
|
||||
configure:
|
||||
rm -rf ${LIBUSB_BUILD_DIR}
|
||||
mkdir -p ${LIBUSB_BUILD_DIR}
|
||||
cd ${LIBUSB_BUILD_DIR} && ${LIBUSB_SRC_DIR}/configure \
|
||||
--prefix=${PREFIX} --exec-prefix=${EXEC_PREFIX}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBUSB_BUILD_DIR}
|
||||
|
||||
build:
|
||||
cd ${LIBUSB_BUILD_DIR} && ${MAKE}
|
||||
|
||||
install:
|
||||
cd ${LIBUSB_BUILD_DIR} && ${MAKE} install
|
||||
|
||||
all: unpack configure build install
|
||||
|
||||
.PHONY: install
|
||||
|
||||
_complain_:
|
||||
@echo ""
|
||||
@echo "Please try one of these targets: bootstrap, clean, configure, build, install"
|
||||
@echo " Or read the makefile and learn about the permutation test targets"
|
||||
@echo ""
|
||||
@echo "You also might find the download and unpack targets helpful."
|
||||
@echo ""
|
||||
@exit 1
|
||||
|
|
@ -1,193 +0,0 @@
|
|||
# -*- mode: makefile -*-
|
||||
#
|
||||
default: _complain_
|
||||
|
||||
include ./local.uses
|
||||
|
||||
|
||||
SRC_DIR ?= $(HERE)/openocd
|
||||
BUILD_SUFFIX ?= $(BUILD_MACHINE)
|
||||
BUILD_DIR =$(HERE)/openocd.$(BUILD_SUFFIX)
|
||||
|
||||
checkout:
|
||||
svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
|
||||
|
||||
remove.install:
|
||||
rm -rf ${INSTALL_DIR}
|
||||
|
||||
#========================================
|
||||
# Win32 Build Permutations
|
||||
# none
|
||||
# parport
|
||||
# ftd2xx - (ftdichip)
|
||||
# libftd
|
||||
CONFIG_OPTIONS_win32_none =
|
||||
CONFIG_OPTIONS_win32_parport = --enable-parport
|
||||
CONFIG_OPTIONS_win32_ftd2xx = --enable-parport --enable-ft2232_ftd2xx --with-ftd2xx-win32-zipdir=$(FTD2XX_WIN32_DIR)
|
||||
|
||||
CYGWIN_EASY_PERMUTATIONS += none
|
||||
CYGWIN_EASY_PERMUTATIONS += parport
|
||||
CYGWIN_EASY_PERMUTATIONS += ftd2xx
|
||||
|
||||
MINGW32_EASY_PERMUTATIONS += none
|
||||
MINGW32_EASY_PERMUTATIONS += parport
|
||||
MINGW32_EASY_PERMUTATIONS += ftd2xx
|
||||
|
||||
|
||||
# This is not a possible permutation, it is manual :-(
|
||||
# Why? Because "libftdi" installs things into install/include
|
||||
# which would efect the 'ftd2xx' win32 build
|
||||
CONFIG_OPTIONS_win32_libftdi = --enable-parport --enable-ft2232_libftdi
|
||||
|
||||
# Default build for win32... is the ftd2xx type build.
|
||||
PERMUTE_win32 ?= ftd2xx
|
||||
CONFIG_OPTIONS_win32 ?= $(CONFIG_OPTIONS_win32_$(PERMUTE_win32))
|
||||
CONFIG_OPTIONS_cygwin = $(CONFIG_OPTIONS_win32)
|
||||
CONFIG_OPTIONS_mingw32 = $(CONFIG_OPTIONS_win32)
|
||||
|
||||
#========================================
|
||||
# Linux Build Permuatations
|
||||
# none
|
||||
# parport
|
||||
# ft2232_ftd2xx
|
||||
# ft2232_libftdi
|
||||
CONFIG_OPTIONS_linux_none =
|
||||
LINUX_EASY_PERMUTATIONS += none
|
||||
|
||||
CONFIG_OPTIONS_linux_parport = --enable-parport
|
||||
LINUX_EASY_PERMUTATIONS += parport
|
||||
|
||||
CONFIG_OPTIONS_linux_ft2232_libftdi = --enable-parport --enable-ft2232-libftdi
|
||||
#this cannot be done as part of the permutations.
|
||||
#LINUX_EASY_PERMUTATIONS += ft2232_libftdi
|
||||
|
||||
CONFIG_OPTIONS_linux_ft2232_ftd2xx_static = \
|
||||
--enable-parport \
|
||||
--enable-ft2232-ftd2xx --with-ftd2xx-lib=static --with-ftd2xx-linux-tardir=$(FTD2XX_LINUX_DIR)
|
||||
LINUX_EASY_PERMUTATIONS += ft2232_ftd2xx_static
|
||||
|
||||
# this is not a possible permutation it is manual :-(
|
||||
# why? because it interfers with the other permutations
|
||||
# by "installing files" in the $(INSTALL_DIR)
|
||||
CONFIG_OPTIONS_linux_ftd2xx_installed = \
|
||||
--enable-parport \
|
||||
--enable-ft2232-ftd2xx \
|
||||
--with-ftd2xx-lib=shared
|
||||
|
||||
# The default build permutation is
|
||||
PERMUTE_linux ?= ft2232_ftd2xx_static
|
||||
CONFIG_OPTIONS_linux = $(CONFIG_OPTIONS_linux_$(PERMUTE_linux))
|
||||
|
||||
CONFIG_OPTIONS_darwin=\
|
||||
--enable-ftd2232-libftdi
|
||||
|
||||
# Which build are we doing?
|
||||
CONFIG_OPTIONS := $(CONFIG_OPTIONS_$(BUILD_SYSNAME))
|
||||
|
||||
bootstrap:
|
||||
cd $(SRC_DIR) && bash ./bootstrap
|
||||
|
||||
clean::
|
||||
rm -rf $(BUILD_DIR)
|
||||
|
||||
ifndef CFLAGS
|
||||
_CFLAGS=true
|
||||
else
|
||||
_CFLAGS=export CFLAGS="${CFLAGS}"
|
||||
endif
|
||||
|
||||
|
||||
# if this was given... then pass it on
|
||||
configure:
|
||||
@echo " Build Sysname: $(BUILD_SYSNAME)"
|
||||
@echo " Config Options: $(CONFIG_OPTIONS)"
|
||||
rm -rf $(BUILD_DIR)
|
||||
mkdir $(BUILD_DIR)
|
||||
${_CFLAGS} && \
|
||||
cd $(BUILD_DIR) && \
|
||||
$(SRC_DIR)/configure \
|
||||
--prefix=$(PREFIX) \
|
||||
--exec-prefix=$(EXEC_PREFIX) \
|
||||
$(CONFIG_OPTIONS)
|
||||
|
||||
build:
|
||||
cd $(BUILD_DIR) && $(MAKE)
|
||||
|
||||
install:
|
||||
cd $(BUILD_DIR) && $(MAKE) install
|
||||
|
||||
all: configure build install
|
||||
|
||||
.PHONY: install
|
||||
|
||||
# The "cygwin.libftdi" requires that libftdi be built
|
||||
# and installed *PRIOR* to running this target.
|
||||
# it is not part of the permutations because ...
|
||||
# it interfers with the ftd2xx based builds
|
||||
cygwin.libftdi:
|
||||
$(MAKE) -f Makefile.openocd bootstrap
|
||||
$(MAKE) BUILD_SUFFIX=$@ PERMUTE_win32=libftdi -f Makefile.openocd all
|
||||
|
||||
cygwin.easy.permutations: remove.install ${CYGWIN_EASY_PERMUTATIONS:%=_cygwin.%}
|
||||
|
||||
_cygwin.%:
|
||||
@echo ""
|
||||
@echo ""
|
||||
@echo "========================================"
|
||||
@echo "Permutation Build... $@"
|
||||
@echo "========================================"
|
||||
@echo ""
|
||||
@echo ""
|
||||
$(MAKE) PERMUTE_win32=$* BUILD_SUFFIX=cygwin.$* -f Makefile.openocd all
|
||||
$(EXEC_PREFIX)/bin/openocd -v
|
||||
|
||||
mingw32.easy.permutations: remove.install ${MINGW32_EASY_PERMUTATIONS:%=_mingw32.%}
|
||||
|
||||
# I (duane) build openocd-mingw32 via Cygwin.
|
||||
# Sadly, the "mingw32" buid for cygwin does not include
|
||||
# the required "elf.h" header files... so ...
|
||||
# we have them in our own private helper place.
|
||||
_mingw32.%:
|
||||
@echo ""
|
||||
@echo ""
|
||||
@echo "========================================"
|
||||
@echo "Permutation Build... $@"
|
||||
@echo "========================================"
|
||||
@echo ""
|
||||
@echo ""
|
||||
CFLAGS="-mno-cygwin -I$(HERE)/mingw32_help/include" \
|
||||
$(MAKE) -f Makefile.openocd all ;\
|
||||
$(EXEC_PREFIX)/bin/openocd -v
|
||||
|
||||
win32.permutations: mingw32.permutations cygwin.permutations
|
||||
|
||||
|
||||
# SMOKE TEST - Build every linux permuation...
|
||||
# If "openocd -v" does exit(0) we are good enough.
|
||||
|
||||
linux.easy.permutations: remove.install ${LINUX_EASY_PERMUTATIONS:%=_linux.%}
|
||||
|
||||
|
||||
_linux.%:
|
||||
@echo ""
|
||||
@echo ""
|
||||
@echo "========================================"
|
||||
@echo "Permutation Build... $@"
|
||||
@echo "========================================"
|
||||
@echo ""
|
||||
@echo ""
|
||||
$(MAKE) PERMUTE_linux=$* BUILD_SUFFIX=linux.$* -f Makefile.openocd all
|
||||
$(EXEC_PREFIX)/bin/openocd -v
|
||||
|
||||
linux.ftd2xx_installed:
|
||||
${MAKE} -f Makefile.openocd _$@
|
||||
|
||||
linux.ft2232_libftdi:
|
||||
${MAKE} -f Makefile.openocd _$@
|
||||
|
||||
_complain_:
|
||||
@echo ""
|
||||
@echo "Please try one of these targets: bootstrap, clean, configure, build, install"
|
||||
@echo " Or read the makefile and learn about the permutation test targets"
|
||||
@echo ""
|
||||
@exit 1
|
||||
|
|
@ -1,38 +0,0 @@
|
|||
-- Duane Ellis'es test case for building numerous openocd configurations...
|
||||
Dec 26,2008
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
1) Make a directory some where..
|
||||
|
||||
mkdir ~/test
|
||||
|
||||
2) Change to that directory
|
||||
|
||||
cd ~/test
|
||||
|
||||
3) Checkout OpenOCD in that directory.
|
||||
|
||||
cd ~/test
|
||||
svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
|
||||
|
||||
4) Copy the "build.test1" directory to the "~/work" directory.
|
||||
|
||||
|
||||
cd ~/test
|
||||
cp ~/openocd/testing/build.test1/. ~/test/.
|
||||
|
||||
5) If needed, download various components.
|
||||
|
||||
cd ~/work
|
||||
make all.download
|
||||
|
||||
|
||||
6) For Linux - type:
|
||||
|
||||
cd ~/work
|
||||
make linux.buildtest
|
||||
|
||||
7) For Cygwin - type:
|
||||
|
||||
cd ~/work
|
||||
make cygwin.buildtest
|
||||
|
|
@ -1,39 +0,0 @@
|
|||
# -*- mode: makefile -*-
|
||||
HERE := $(shell pwd)
|
||||
|
||||
# Solve problems on systems with DASH.. Grrr...
|
||||
SHELL=/bin/bash
|
||||
export SHELL
|
||||
|
||||
VIRGINS=${HERE}/virgins
|
||||
|
||||
# Determine the build platform.
|
||||
BUILD_SYSNAME_Linux =linux
|
||||
BUILD_SYSNAME_linux =linux
|
||||
BUILD_SYSNAME_CYGWIN_NT =cygwin
|
||||
BUILD_SYSNAME_MINGW32_NT =mingw32
|
||||
BUILD_SYSNAME_Darwin =darwin
|
||||
BUILD_SYSNAME_darwin =darwin
|
||||
BUILD_SYSNAME :=$(BUILD_SYSNAME_$(shell uname --sysname | cut -d'-' -f1))
|
||||
|
||||
# And machine (ie: i686, x86_64, or what)
|
||||
BUILD_MACHINE :=$(BUILD_SYSNAME).$(shell uname -m)
|
||||
|
||||
|
||||
INSTALL_DIR := $(HERE)/install
|
||||
PREFIX := ${INSTALL_DIR}
|
||||
EXEC_PREFIX := ${INSTALL_DIR}/${BUILD_MACHINE}
|
||||
|
||||
LIBFTDI_VERSION=0.14
|
||||
LIBCONFUSE_VERSION=2.5
|
||||
|
||||
LIBUSB_VERSION_linux=0.1.12
|
||||
|
||||
LIBUSB_VERSION=${LIBUSB_VERSION_${BUILD_SYSNAME}}
|
||||
|
||||
FTD2XX_WIN32_VERSION=2.04.14
|
||||
FTD2XX_WIN32_DIR = ${HERE}/ftd2xx.win32
|
||||
|
||||
FTD2XX_LINUX_VERSION=0.4.16
|
||||
FTD2XX_LINUX_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}
|
||||
FTD2XX_LINUX_64_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64
|
||||
|
|
@ -1,38 +0,0 @@
|
|||
/* elf.h
|
||||
|
||||
Copyright 2005 Red Hat, Inc.
|
||||
|
||||
This file is part of Cygwin.
|
||||
|
||||
This software is a copyrighted work licensed under the terms of the
|
||||
Cygwin license. Please consult the file "CYGWIN_LICENSE" for
|
||||
details. */
|
||||
|
||||
#ifndef _ELF_H_
|
||||
#define _ELF_H_
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
typedef signed char int8_t;
|
||||
typedef unsigned char u_int8_t;
|
||||
typedef short int16_t;
|
||||
typedef unsigned short u_int16_t;
|
||||
typedef int int32_t;
|
||||
typedef unsigned int u_int32_t;
|
||||
typedef long long int64_t;
|
||||
typedef unsigned long long u_int64_t;
|
||||
typedef int32_t register_t;
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
#include <sys/types.h>
|
||||
#include <sys/elf32.h>
|
||||
#include <sys/elf64.h>
|
||||
#include <sys/elf_generic.h>
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*_ELF_H_*/
|
||||
|
|
@ -1,22 +0,0 @@
|
|||
/* sys/cdefs.h
|
||||
|
||||
Copyright 1998, 2000, 2001 Red Hat, Inc.
|
||||
|
||||
This file is part of Cygwin.
|
||||
|
||||
This software is a copyrighted work licensed under the terms of the
|
||||
Cygwin license. Please consult the file "CYGWIN_LICENSE" for
|
||||
details. */
|
||||
|
||||
#ifndef _SYS_CDEFS_H
|
||||
#define _SYS_CDEFS_H
|
||||
#ifdef __cplusplus
|
||||
#define __BEGIN_DECLS extern "C" {
|
||||
#define __END_DECLS }
|
||||
#else
|
||||
#define __BEGIN_DECLS
|
||||
#define __END_DECLS
|
||||
#endif
|
||||
#define __P(protos) protos /* full-blown ANSI C */
|
||||
#define __CONCAT(__x,__y) __x##__y
|
||||
#endif
|
||||
|
|
@ -1,156 +0,0 @@
|
|||
/*-
|
||||
* Copyright (c) 1996-1998 John D. Polstra.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD: src/sys/sys/elf32.h,v 1.8 2002/05/30 08:32:18 dfr Exp $
|
||||
*/
|
||||
|
||||
#ifndef _SYS_ELF32_H_
|
||||
#define _SYS_ELF32_H_ 1
|
||||
|
||||
#include <sys/elf_common.h>
|
||||
|
||||
/*
|
||||
* ELF definitions common to all 32-bit architectures.
|
||||
*/
|
||||
|
||||
typedef u_int32_t Elf32_Addr;
|
||||
typedef u_int16_t Elf32_Half;
|
||||
typedef u_int32_t Elf32_Off;
|
||||
typedef int32_t Elf32_Sword;
|
||||
typedef u_int32_t Elf32_Word;
|
||||
typedef u_int32_t Elf32_Size;
|
||||
typedef Elf32_Off Elf32_Hashelt;
|
||||
|
||||
/*
|
||||
* ELF header.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
unsigned char e_ident[EI_NIDENT]; /* File identification. */
|
||||
Elf32_Half e_type; /* File type. */
|
||||
Elf32_Half e_machine; /* Machine architecture. */
|
||||
Elf32_Word e_version; /* ELF format version. */
|
||||
Elf32_Addr e_entry; /* Entry point. */
|
||||
Elf32_Off e_phoff; /* Program header file offset. */
|
||||
Elf32_Off e_shoff; /* Section header file offset. */
|
||||
Elf32_Word e_flags; /* Architecture-specific flags. */
|
||||
Elf32_Half e_ehsize; /* Size of ELF header in bytes. */
|
||||
Elf32_Half e_phentsize; /* Size of program header entry. */
|
||||
Elf32_Half e_phnum; /* Number of program header entries. */
|
||||
Elf32_Half e_shentsize; /* Size of section header entry. */
|
||||
Elf32_Half e_shnum; /* Number of section header entries. */
|
||||
Elf32_Half e_shstrndx; /* Section name strings section. */
|
||||
} Elf32_Ehdr;
|
||||
|
||||
/*
|
||||
* Section header.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
Elf32_Word sh_name; /* Section name (index into the
|
||||
section header string table). */
|
||||
Elf32_Word sh_type; /* Section type. */
|
||||
Elf32_Word sh_flags; /* Section flags. */
|
||||
Elf32_Addr sh_addr; /* Address in memory image. */
|
||||
Elf32_Off sh_offset; /* Offset in file. */
|
||||
Elf32_Size sh_size; /* Size in bytes. */
|
||||
Elf32_Word sh_link; /* Index of a related section. */
|
||||
Elf32_Word sh_info; /* Depends on section type. */
|
||||
Elf32_Size sh_addralign; /* Alignment in bytes. */
|
||||
Elf32_Size sh_entsize; /* Size of each entry in section. */
|
||||
} Elf32_Shdr;
|
||||
|
||||
/*
|
||||
* Program header.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
Elf32_Word p_type; /* Entry type. */
|
||||
Elf32_Off p_offset; /* File offset of contents. */
|
||||
Elf32_Addr p_vaddr; /* Virtual address in memory image. */
|
||||
Elf32_Addr p_paddr; /* Physical address (not used). */
|
||||
Elf32_Size p_filesz; /* Size of contents in file. */
|
||||
Elf32_Size p_memsz; /* Size of contents in memory. */
|
||||
Elf32_Word p_flags; /* Access permission flags. */
|
||||
Elf32_Size p_align; /* Alignment in memory and file. */
|
||||
} Elf32_Phdr;
|
||||
|
||||
/*
|
||||
* Dynamic structure. The ".dynamic" section contains an array of them.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
Elf32_Sword d_tag; /* Entry type. */
|
||||
union {
|
||||
Elf32_Size d_val; /* Integer value. */
|
||||
Elf32_Addr d_ptr; /* Address value. */
|
||||
} d_un;
|
||||
} Elf32_Dyn;
|
||||
|
||||
/*
|
||||
* Relocation entries.
|
||||
*/
|
||||
|
||||
/* Relocations that don't need an addend field. */
|
||||
typedef struct {
|
||||
Elf32_Addr r_offset; /* Location to be relocated. */
|
||||
Elf32_Word r_info; /* Relocation type and symbol index. */
|
||||
} Elf32_Rel;
|
||||
|
||||
/* Relocations that need an addend field. */
|
||||
typedef struct {
|
||||
Elf32_Addr r_offset; /* Location to be relocated. */
|
||||
Elf32_Word r_info; /* Relocation type and symbol index. */
|
||||
Elf32_Sword r_addend; /* Addend. */
|
||||
} Elf32_Rela;
|
||||
|
||||
/* Macros for accessing the fields of r_info. */
|
||||
#define ELF32_R_SYM(info) ((info) >> 8)
|
||||
#define ELF32_R_TYPE(info) ((unsigned char)(info))
|
||||
|
||||
/* Macro for constructing r_info from field values. */
|
||||
#define ELF32_R_INFO(sym, type) (((sym) << 8) + (unsigned char)(type))
|
||||
|
||||
/*
|
||||
* Symbol table entries.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
Elf32_Word st_name; /* String table index of name. */
|
||||
Elf32_Addr st_value; /* Symbol value. */
|
||||
Elf32_Size st_size; /* Size of associated object. */
|
||||
unsigned char st_info; /* Type and binding information. */
|
||||
unsigned char st_other; /* Reserved (not used). */
|
||||
Elf32_Half st_shndx; /* Section index of symbol. */
|
||||
} Elf32_Sym;
|
||||
|
||||
/* Macros for accessing the fields of st_info. */
|
||||
#define ELF32_ST_BIND(info) ((info) >> 4)
|
||||
#define ELF32_ST_TYPE(info) ((info) & 0xf)
|
||||
|
||||
/* Macro for constructing st_info from field values. */
|
||||
#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
|
||||
|
||||
#endif /* !_SYS_ELF32_H_ */
|
||||
|
|
@ -1,172 +0,0 @@
|
|||
/*-
|
||||
* Copyright (c) 1996-1998 John D. Polstra.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD: src/sys/sys/elf64.h,v 1.10 2002/05/30 08:32:18 dfr Exp $
|
||||
*/
|
||||
|
||||
#ifndef _SYS_ELF64_H_
|
||||
#define _SYS_ELF64_H_ 1
|
||||
|
||||
#include <sys/elf_common.h>
|
||||
|
||||
/*
|
||||
* ELF definitions common to all 64-bit architectures.
|
||||
*/
|
||||
|
||||
typedef uint64_t Elf64_Addr;
|
||||
typedef uint16_t Elf64_Half;
|
||||
typedef uint32_t Elf64_Word;
|
||||
typedef int32_t Elf64_Sword;
|
||||
typedef uint64_t Elf64_Xword;
|
||||
typedef int64_t Elf64_Sxword;
|
||||
typedef uint64_t Elf64_Off;
|
||||
typedef uint16_t Elf64_Section;
|
||||
typedef Elf64_Half Elf64_Versym;
|
||||
typedef uint16_t Elf64_Quarter;
|
||||
|
||||
/*
|
||||
* Types of dynamic symbol hash table bucket and chain elements.
|
||||
*
|
||||
* This is inconsistent among 64 bit architectures, so a machine dependent
|
||||
* typedef is required.
|
||||
*/
|
||||
|
||||
#ifdef __alpha__
|
||||
typedef Elf64_Off Elf64_Hashelt;
|
||||
#else
|
||||
typedef Elf64_Half Elf64_Hashelt;
|
||||
#endif
|
||||
|
||||
/*
|
||||
* ELF header.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
unsigned char e_ident[EI_NIDENT]; /* File identification. */
|
||||
Elf64_Half e_type; /* File type. */
|
||||
Elf64_Half e_machine; /* Machine architecture. */
|
||||
Elf64_Word e_version; /* ELF format version. */
|
||||
Elf64_Addr e_entry; /* Entry point. */
|
||||
Elf64_Off e_phoff; /* Program header file offset. */
|
||||
Elf64_Off e_shoff; /* Section header file offset. */
|
||||
Elf64_Word e_flags; /* Architecture-specific flags. */
|
||||
Elf64_Half e_ehsize; /* Size of ELF header in bytes. */
|
||||
Elf64_Half e_phentsize; /* Size of program header entry. */
|
||||
Elf64_Half e_phnum; /* Number of program header entries. */
|
||||
Elf64_Half e_shentsize; /* Size of section header entry. */
|
||||
Elf64_Half e_shnum; /* Number of section header entries. */
|
||||
Elf64_Half e_shstrndx; /* Section name strings section. */
|
||||
} Elf64_Ehdr;
|
||||
|
||||
/*
|
||||
* Section header.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
Elf64_Word sh_name; /* Section name (index into the
|
||||
section header string table). */
|
||||
Elf64_Word sh_type; /* Section type. */
|
||||
Elf64_Xword sh_flags; /* Section flags. */
|
||||
Elf64_Addr sh_addr; /* Address in memory image. */
|
||||
Elf64_Off sh_offset; /* Offset in file. */
|
||||
Elf64_Xword sh_size; /* Size in bytes. */
|
||||
Elf64_Word sh_link; /* Index of a related section. */
|
||||
Elf64_Word sh_info; /* Depends on section type. */
|
||||
Elf64_Xword sh_addralign; /* Alignment in bytes. */
|
||||
Elf64_Xword sh_entsize; /* Size of each entry in section. */
|
||||
} Elf64_Shdr;
|
||||
|
||||
/*
|
||||
* Program header.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
Elf64_Word p_type; /* Entry type. */
|
||||
Elf64_Word p_flags; /* Access permission flags. */
|
||||
Elf64_Off p_offset; /* File offset of contents. */
|
||||
Elf64_Addr p_vaddr; /* Virtual address in memory image. */
|
||||
Elf64_Addr p_paddr; /* Physical address (not used). */
|
||||
Elf64_Xword p_filesz; /* Size of contents in file. */
|
||||
Elf64_Xword p_memsz; /* Size of contents in memory. */
|
||||
Elf64_Xword p_align; /* Alignment in memory and file. */
|
||||
} Elf64_Phdr;
|
||||
|
||||
/*
|
||||
* Dynamic structure. The ".dynamic" section contains an array of them.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
Elf64_Sxword d_tag; /* Entry type. */
|
||||
union {
|
||||
Elf64_Xword d_val; /* Integer value. */
|
||||
Elf64_Addr d_ptr; /* Address value. */
|
||||
} d_un;
|
||||
} Elf64_Dyn;
|
||||
|
||||
/*
|
||||
* Relocation entries.
|
||||
*/
|
||||
|
||||
/* Relocations that don't need an addend field. */
|
||||
typedef struct {
|
||||
Elf64_Addr r_offset; /* Location to be relocated. */
|
||||
Elf64_Xword r_info; /* Relocation type and symbol index. */
|
||||
} Elf64_Rel;
|
||||
|
||||
/* Relocations that need an addend field. */
|
||||
typedef struct {
|
||||
Elf64_Addr r_offset; /* Location to be relocated. */
|
||||
Elf64_Xword r_info; /* Relocation type and symbol index. */
|
||||
Elf64_Sxword r_addend; /* Addend. */
|
||||
} Elf64_Rela;
|
||||
|
||||
/* Macros for accessing the fields of r_info. */
|
||||
#define ELF64_R_SYM(info) ((info) >> 32)
|
||||
#define ELF64_R_TYPE(info) ((unsigned char)(info))
|
||||
|
||||
/* Macro for constructing r_info from field values. */
|
||||
#define ELF64_R_INFO(sym, type) (((sym) << 32) + (unsigned char)(type))
|
||||
|
||||
/*
|
||||
* Symbol table entries.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
Elf64_Word st_name; /* String table index of name. */
|
||||
unsigned char st_info; /* Type and binding information. */
|
||||
unsigned char st_other; /* Reserved (not used). */
|
||||
Elf64_Section st_shndx; /* Section index of symbol. */
|
||||
Elf64_Addr st_value; /* Symbol value. */
|
||||
Elf64_Xword st_size; /* Size of associated object. */
|
||||
} Elf64_Sym;
|
||||
|
||||
/* Macros for accessing the fields of st_info. */
|
||||
#define ELF64_ST_BIND(info) ((info) >> 4)
|
||||
#define ELF64_ST_TYPE(info) ((info) & 0xf)
|
||||
|
||||
/* Macro for constructing st_info from field values. */
|
||||
#define ELF64_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
|
||||
|
||||
#endif /* !_SYS_ELF64_H_ */
|
||||
|
|
@ -1,299 +0,0 @@
|
|||
/*-
|
||||
* Copyright (c) 1998 John D. Polstra.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD: src/sys/sys/elf_common.h,v 1.15 2004/05/05 02:38:54 marcel Exp $
|
||||
*/
|
||||
|
||||
#ifndef _SYS_ELF_COMMON_H_
|
||||
#define _SYS_ELF_COMMON_H_ 1
|
||||
|
||||
/*
|
||||
* ELF definitions that are independent of architecture or word size.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Note header. The ".note" section contains an array of notes. Each
|
||||
* begins with this header, aligned to a word boundary. Immediately
|
||||
* following the note header is n_namesz bytes of name, padded to the
|
||||
* next word boundary. Then comes n_descsz bytes of descriptor, again
|
||||
* padded to a word boundary. The values of n_namesz and n_descsz do
|
||||
* not include the padding.
|
||||
*/
|
||||
|
||||
typedef struct {
|
||||
u_int32_t n_namesz; /* Length of name. */
|
||||
u_int32_t n_descsz; /* Length of descriptor. */
|
||||
u_int32_t n_type; /* Type of this note. */
|
||||
} Elf_Note;
|
||||
|
||||
/* Indexes into the e_ident array. Keep synced with
|
||||
http://www.sco.com/developer/gabi/ch4.eheader.html */
|
||||
#define EI_MAG0 0 /* Magic number, byte 0. */
|
||||
#define EI_MAG1 1 /* Magic number, byte 1. */
|
||||
#define EI_MAG2 2 /* Magic number, byte 2. */
|
||||
#define EI_MAG3 3 /* Magic number, byte 3. */
|
||||
#define EI_CLASS 4 /* Class of machine. */
|
||||
#define EI_DATA 5 /* Data format. */
|
||||
#define EI_VERSION 6 /* ELF format version. */
|
||||
#define EI_OSABI 7 /* Operating system / ABI identification */
|
||||
#define EI_ABIVERSION 8 /* ABI version */
|
||||
#define OLD_EI_BRAND 8 /* Start of architecture identification. */
|
||||
#define EI_PAD 9 /* Start of padding (per SVR4 ABI). */
|
||||
#define EI_NIDENT 16 /* Size of e_ident array. */
|
||||
|
||||
/* Values for the magic number bytes. */
|
||||
#define ELFMAG0 0x7f
|
||||
#define ELFMAG1 'E'
|
||||
#define ELFMAG2 'L'
|
||||
#define ELFMAG3 'F'
|
||||
#define ELFMAG "\177ELF" /* magic string */
|
||||
#define SELFMAG 4 /* magic string size */
|
||||
|
||||
/* Values for e_ident[EI_VERSION] and e_version. */
|
||||
#define EV_NONE 0
|
||||
#define EV_CURRENT 1
|
||||
|
||||
/* Values for e_ident[EI_CLASS]. */
|
||||
#define ELFCLASSNONE 0 /* Unknown class. */
|
||||
#define ELFCLASS32 1 /* 32-bit architecture. */
|
||||
#define ELFCLASS64 2 /* 64-bit architecture. */
|
||||
|
||||
/* Values for e_ident[EI_DATA]. */
|
||||
#define ELFDATANONE 0 /* Unknown data format. */
|
||||
#define ELFDATA2LSB 1 /* 2's complement little-endian. */
|
||||
#define ELFDATA2MSB 2 /* 2's complement big-endian. */
|
||||
|
||||
/* Values for e_ident[EI_OSABI]. */
|
||||
#define ELFOSABI_SYSV 0 /* UNIX System V ABI */
|
||||
#define ELFOSABI_NONE ELFOSABI_SYSV /* symbol used in old spec */
|
||||
#define ELFOSABI_HPUX 1 /* HP-UX operating system */
|
||||
#define ELFOSABI_NETBSD 2 /* NetBSD */
|
||||
#define ELFOSABI_LINUX 3 /* GNU/Linux */
|
||||
#define ELFOSABI_HURD 4 /* GNU/Hurd */
|
||||
#define ELFOSABI_86OPEN 5 /* 86Open common IA32 ABI */
|
||||
#define ELFOSABI_SOLARIS 6 /* Solaris */
|
||||
#define ELFOSABI_MONTEREY 7 /* Monterey */
|
||||
#define ELFOSABI_IRIX 8 /* IRIX */
|
||||
#define ELFOSABI_FREEBSD 9 /* FreeBSD */
|
||||
#define ELFOSABI_TRU64 10 /* TRU64 UNIX */
|
||||
#define ELFOSABI_MODESTO 11 /* Novell Modesto */
|
||||
#define ELFOSABI_OPENBSD 12 /* OpenBSD */
|
||||
#define ELFOSABI_ARM 97 /* ARM */
|
||||
#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */
|
||||
|
||||
/* e_ident */
|
||||
#define IS_ELF(ehdr) ((ehdr).e_ident[EI_MAG0] == ELFMAG0 && \
|
||||
(ehdr).e_ident[EI_MAG1] == ELFMAG1 && \
|
||||
(ehdr).e_ident[EI_MAG2] == ELFMAG2 && \
|
||||
(ehdr).e_ident[EI_MAG3] == ELFMAG3)
|
||||
|
||||
/* Values for e_type. */
|
||||
#define ET_NONE 0 /* Unknown type. */
|
||||
#define ET_REL 1 /* Relocatable. */
|
||||
#define ET_EXEC 2 /* Executable. */
|
||||
#define ET_DYN 3 /* Shared object. */
|
||||
#define ET_CORE 4 /* Core file. */
|
||||
|
||||
/* Values for e_machine. */
|
||||
#define EM_NONE 0 /* Unknown machine. */
|
||||
#define EM_M32 1 /* AT&T WE32100. */
|
||||
#define EM_SPARC 2 /* Sun SPARC. */
|
||||
#define EM_386 3 /* Intel i386. */
|
||||
#define EM_68K 4 /* Motorola 68000. */
|
||||
#define EM_88K 5 /* Motorola 88000. */
|
||||
#define EM_486 6 /* Intel i486. */
|
||||
#define EM_860 7 /* Intel i860. */
|
||||
#define EM_MIPS 8 /* MIPS R3000 Big-Endian only */
|
||||
|
||||
/* Extensions. This list is not complete. */
|
||||
#define EM_S370 9 /* IBM System/370 */
|
||||
#define EM_MIPS_RS4_BE 10 /* MIPS R4000 Big-Endian */ /* Depreciated */
|
||||
#define EM_PARISC 15 /* HPPA */
|
||||
#define EM_SPARC32PLUS 18 /* SPARC v8plus */
|
||||
#define EM_PPC 20 /* PowerPC 32-bit */
|
||||
#define EM_PPC64 21 /* PowerPC 64-bit */
|
||||
#define EM_ARM 40 /* ARM */
|
||||
#define EM_SPARCV9 43 /* SPARC v9 64-bit */
|
||||
#define EM_IA_64 50 /* Intel IA-64 Processor */
|
||||
#define EM_X86_64 62 /* Advanced Micro Devices x86-64 */
|
||||
#define EM_ALPHA 0x9026 /* Alpha (written in the absence of an ABI */
|
||||
|
||||
/* Special section indexes. */
|
||||
#define SHN_UNDEF 0 /* Undefined, missing, irrelevant. */
|
||||
#define SHN_LORESERVE 0xff00 /* First of reserved range. */
|
||||
#define SHN_LOPROC 0xff00 /* First processor-specific. */
|
||||
#define SHN_HIPROC 0xff1f /* Last processor-specific. */
|
||||
#define SHN_ABS 0xfff1 /* Absolute values. */
|
||||
#define SHN_COMMON 0xfff2 /* Common data. */
|
||||
#define SHN_HIRESERVE 0xffff /* Last of reserved range. */
|
||||
|
||||
/* sh_type */
|
||||
#define SHT_NULL 0 /* inactive */
|
||||
#define SHT_PROGBITS 1 /* program defined information */
|
||||
#define SHT_SYMTAB 2 /* symbol table section */
|
||||
#define SHT_STRTAB 3 /* string table section */
|
||||
#define SHT_RELA 4 /* relocation section with addends */
|
||||
#define SHT_HASH 5 /* symbol hash table section */
|
||||
#define SHT_DYNAMIC 6 /* dynamic section */
|
||||
#define SHT_NOTE 7 /* note section */
|
||||
#define SHT_NOBITS 8 /* no space section */
|
||||
#define SHT_REL 9 /* relocation section - no addends */
|
||||
#define SHT_SHLIB 10 /* reserved - purpose unknown */
|
||||
#define SHT_DYNSYM 11 /* dynamic symbol table section */
|
||||
#define SHT_NUM 12 /* number of section types */
|
||||
#define SHT_LOOS 0x60000000 /* First of OS specific semantics */
|
||||
#define SHT_HIOS 0x6fffffff /* Last of OS specific semantics */
|
||||
#define SHT_LOPROC 0x70000000 /* reserved range for processor */
|
||||
#define SHT_HIPROC 0x7fffffff /* specific section header types */
|
||||
#define SHT_LOUSER 0x80000000 /* reserved range for application */
|
||||
#define SHT_HIUSER 0xffffffff /* specific indexes */
|
||||
|
||||
/* Flags for sh_flags. */
|
||||
#define SHF_WRITE 0x1 /* Section contains writable data. */
|
||||
#define SHF_ALLOC 0x2 /* Section occupies memory. */
|
||||
#define SHF_EXECINSTR 0x4 /* Section contains instructions. */
|
||||
#define SHF_TLS 0x400 /* Section contains TLS data. */
|
||||
#define SHF_MASKPROC 0xf0000000 /* Reserved for processor-specific. */
|
||||
|
||||
/* Values for p_type. */
|
||||
#define PT_NULL 0 /* Unused entry. */
|
||||
#define PT_LOAD 1 /* Loadable segment. */
|
||||
#define PT_DYNAMIC 2 /* Dynamic linking information segment. */
|
||||
#define PT_INTERP 3 /* Pathname of interpreter. */
|
||||
#define PT_NOTE 4 /* Auxiliary information. */
|
||||
#define PT_SHLIB 5 /* Reserved (not used). */
|
||||
#define PT_PHDR 6 /* Location of program header itself. */
|
||||
#define PT_TLS 7 /* Thread local storage segment */
|
||||
|
||||
#define PT_COUNT 8 /* Number of defined p_type values. */
|
||||
|
||||
#define PT_LOOS 0x60000000 /* OS-specific */
|
||||
#define PT_HIOS 0x6fffffff /* OS-specific */
|
||||
#define PT_LOPROC 0x70000000 /* First processor-specific type. */
|
||||
#define PT_HIPROC 0x7fffffff /* Last processor-specific type. */
|
||||
|
||||
/* Values for p_flags. */
|
||||
#define PF_X 0x1 /* Executable. */
|
||||
#define PF_W 0x2 /* Writable. */
|
||||
#define PF_R 0x4 /* Readable. */
|
||||
|
||||
/* Values for d_tag. */
|
||||
#define DT_NULL 0 /* Terminating entry. */
|
||||
#define DT_NEEDED 1 /* String table offset of a needed shared
|
||||
library. */
|
||||
#define DT_PLTRELSZ 2 /* Total size in bytes of PLT relocations. */
|
||||
#define DT_PLTGOT 3 /* Processor-dependent address. */
|
||||
#define DT_HASH 4 /* Address of symbol hash table. */
|
||||
#define DT_STRTAB 5 /* Address of string table. */
|
||||
#define DT_SYMTAB 6 /* Address of symbol table. */
|
||||
#define DT_RELA 7 /* Address of ElfNN_Rela relocations. */
|
||||
#define DT_RELASZ 8 /* Total size of ElfNN_Rela relocations. */
|
||||
#define DT_RELAENT 9 /* Size of each ElfNN_Rela relocation entry. */
|
||||
#define DT_STRSZ 10 /* Size of string table. */
|
||||
#define DT_SYMENT 11 /* Size of each symbol table entry. */
|
||||
#define DT_INIT 12 /* Address of initialization function. */
|
||||
#define DT_FINI 13 /* Address of finalization function. */
|
||||
#define DT_SONAME 14 /* String table offset of shared object
|
||||
name. */
|
||||
#define DT_RPATH 15 /* String table offset of library path. [sup] */
|
||||
#define DT_SYMBOLIC 16 /* Indicates "symbolic" linking. [sup] */
|
||||
#define DT_REL 17 /* Address of ElfNN_Rel relocations. */
|
||||
#define DT_RELSZ 18 /* Total size of ElfNN_Rel relocations. */
|
||||
#define DT_RELENT 19 /* Size of each ElfNN_Rel relocation. */
|
||||
#define DT_PLTREL 20 /* Type of relocation used for PLT. */
|
||||
#define DT_DEBUG 21 /* Reserved (not used). */
|
||||
#define DT_TEXTREL 22 /* Indicates there may be relocations in
|
||||
non-writable segments. [sup] */
|
||||
#define DT_JMPREL 23 /* Address of PLT relocations. */
|
||||
#define DT_BIND_NOW 24 /* [sup] */
|
||||
#define DT_INIT_ARRAY 25 /* Address of the array of pointers to
|
||||
initialization functions */
|
||||
#define DT_FINI_ARRAY 26 /* Address of the array of pointers to
|
||||
termination functions */
|
||||
#define DT_INIT_ARRAYSZ 27 /* Size in bytes of the array of
|
||||
initialization functions. */
|
||||
#define DT_FINI_ARRAYSZ 28 /* Size in bytes of the array of
|
||||
terminationfunctions. */
|
||||
#define DT_RUNPATH 29 /* String table offset of a null-terminated
|
||||
library search path string. */
|
||||
#define DT_FLAGS 30 /* Object specific flag values. */
|
||||
#define DT_ENCODING 32 /* Values greater than or equal to DT_ENCODING
|
||||
and less than DT_LOOS follow the rules for
|
||||
the interpretation of the d_un union
|
||||
as follows: even == 'd_ptr', even == 'd_val'
|
||||
or none */
|
||||
#define DT_PREINIT_ARRAY 32 /* Address of the array of pointers to
|
||||
pre-initialization functions. */
|
||||
#define DT_PREINIT_ARRAYSZ 33 /* Size in bytes of the array of
|
||||
pre-initialization functions. */
|
||||
|
||||
#define DT_COUNT 33 /* Number of defined d_tag values. */
|
||||
|
||||
#define DT_LOOS 0x6000000d /* First OS-specific */
|
||||
#define DT_HIOS 0x6fff0000 /* Last OS-specific */
|
||||
#define DT_LOPROC 0x70000000 /* First processor-specific type. */
|
||||
#define DT_HIPROC 0x7fffffff /* Last processor-specific type. */
|
||||
|
||||
/* Values for DT_FLAGS */
|
||||
#define DF_ORIGIN 0x0001 /* Indicates that the object being loaded may
|
||||
make reference to the $ORIGIN substitution
|
||||
string */
|
||||
#define DF_SYMBOLIC 0x0002 /* Indicates "symbolic" linking. */
|
||||
#define DF_TEXTREL 0x0004 /* Indicates there may be relocations in
|
||||
non-writable segments. */
|
||||
#define DF_BIND_NOW 0x0008 /* Indicates that the dynamic linker should
|
||||
process all relocations for the object
|
||||
containing this entry before transferring
|
||||
control to the program. */
|
||||
#define DF_STATIC_TLS 0x0010 /* Indicates that the shared object or
|
||||
executable contains code using a static
|
||||
thread-local storage scheme. */
|
||||
|
||||
/* Values for n_type. Used in core files. */
|
||||
#define NT_PRSTATUS 1 /* Process status. */
|
||||
#define NT_FPREGSET 2 /* Floating point registers. */
|
||||
#define NT_PRPSINFO 3 /* Process state info. */
|
||||
|
||||
/* Symbol Binding - ELFNN_ST_BIND - st_info */
|
||||
#define STB_LOCAL 0 /* Local symbol */
|
||||
#define STB_GLOBAL 1 /* Global symbol */
|
||||
#define STB_WEAK 2 /* like global - lower precedence */
|
||||
#define STB_LOPROC 13 /* reserved range for processor */
|
||||
#define STB_HIPROC 15 /* specific symbol bindings */
|
||||
|
||||
/* Symbol type - ELFNN_ST_TYPE - st_info */
|
||||
#define STT_NOTYPE 0 /* Unspecified type. */
|
||||
#define STT_OBJECT 1 /* Data object. */
|
||||
#define STT_FUNC 2 /* Function. */
|
||||
#define STT_SECTION 3 /* Section. */
|
||||
#define STT_FILE 4 /* Source file. */
|
||||
#define STT_TLS 6 /* TLS object. */
|
||||
#define STT_LOPROC 13 /* reserved range for processor */
|
||||
#define STT_HIPROC 15 /* specific symbol types */
|
||||
|
||||
/* Special symbol table indexes. */
|
||||
#define STN_UNDEF 0 /* Undefined symbol index. */
|
||||
|
||||
#endif /* !_SYS_ELF_COMMON_H_ */
|
||||
|
|
@ -1,91 +0,0 @@
|
|||
/*-
|
||||
* Copyright (c) 1998 John D. Polstra.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD: src/sys/sys/elf_generic.h,v 1.6 2002/07/20 02:56:11 peter Exp $
|
||||
*/
|
||||
|
||||
#ifndef _SYS_ELF_GENERIC_H_
|
||||
#define _SYS_ELF_GENERIC_H_ 1
|
||||
|
||||
#include <sys/cdefs.h>
|
||||
|
||||
/*
|
||||
* Definitions of generic ELF names which relieve applications from
|
||||
* needing to know the word size.
|
||||
*/
|
||||
|
||||
#ifndef __ELF_WORD_SIZE
|
||||
# define __ELF_WORD_SIZE 32
|
||||
#endif
|
||||
|
||||
#if __ELF_WORD_SIZE != 32 && __ELF_WORD_SIZE != 64
|
||||
#error "__ELF_WORD_SIZE must be defined as 32 or 64"
|
||||
#endif
|
||||
|
||||
#define ELF_CLASS __CONCAT(ELFCLASS,__ELF_WORD_SIZE)
|
||||
|
||||
#if BYTE_ORDER == LITTLE_ENDIAN
|
||||
#define ELF_DATA ELFDATA2LSB
|
||||
#elif BYTE_ORDER == BIG_ENDIAN
|
||||
#define ELF_DATA ELFDATA2MSB
|
||||
#else
|
||||
#error "Unknown byte order"
|
||||
#endif
|
||||
|
||||
#if __ELF_WORD_SIZE == 32
|
||||
#define __elfN(x) elf32_##x
|
||||
#define __ElfN(x) Elf32_##x
|
||||
#define __ELFN(x) ELF32_##x
|
||||
#else
|
||||
#define __elfN(x) elf364_##x
|
||||
#define __ElfN(x) Elf364_##x
|
||||
#define __ELFN(x) ELF364_##x
|
||||
#endif
|
||||
#define __ElfType(x) typedef __ElfN(x) Elf_##x
|
||||
|
||||
#define FOO
|
||||
__ElfType(Addr);
|
||||
__ElfType(Half);
|
||||
__ElfType(Off);
|
||||
__ElfType(Sword);
|
||||
__ElfType(Word);
|
||||
__ElfType(Size);
|
||||
__ElfType(Hashelt);
|
||||
__ElfType(Ehdr);
|
||||
__ElfType(Shdr);
|
||||
__ElfType(Phdr);
|
||||
__ElfType(Dyn);
|
||||
__ElfType(Rel);
|
||||
__ElfType(Rela);
|
||||
__ElfType(Sym);
|
||||
|
||||
#define ELF_R_SYM __ELFN(R_SYM)
|
||||
#define ELF_R_TYPE __ELFN(R_TYPE)
|
||||
#define ELF_R_INFO __ELFN(R_INFO)
|
||||
#define ELF_ST_BIND __ELFN(ST_BIND)
|
||||
#define ELF_ST_TYPE __ELFN(ST_TYPE)
|
||||
#define ELF_ST_INFO __ELFN(ST_INFO)
|
||||
|
||||
#endif /* !_SYS_ELF_GENERIC_H_ */
|
||||
|
|
@ -1,193 +0,0 @@
|
|||
# -*- mode: makefile -*-
|
||||
#========================================
|
||||
# DO NOT DELETE THE LINE BELOW
|
||||
_default: default
|
||||
# DO NOT DELETE THE LINE_ABOVE
|
||||
#========================================
|
||||
|
||||
#========================================
|
||||
#
|
||||
# There are no user configurable options here.
|
||||
#
|
||||
# All user configurable options are in local.uses
|
||||
#
|
||||
include ./local.uses
|
||||
#
|
||||
#========================================
|
||||
|
||||
#========================================
|
||||
# This is the USB driver for the FTDI2XX chips.
|
||||
# It is a "closed" solution from FTDICHIP.COM
|
||||
# Some claim it is faster then the open/free
|
||||
# solution: win32-libusb+libftdi.
|
||||
#
|
||||
ftd2xx.download:
|
||||
mkdir -p ${VIRGINS}
|
||||
wget -O ${FTD2XX_ZIPFILE_LOCAL} \
|
||||
${FTD2XX_ZIPFILE_URL}
|
||||
|
||||
ftd2xx.unpack:
|
||||
rm -rf ${FTD2XX_WIN32_DIR}
|
||||
mkdir -p ${FTD2XX_WIN32_DIR}
|
||||
cd ${FTD2XX_WIN32_DIR} && unzip \
|
||||
${FTD2XX_ZIPFILE_LOCAL}
|
||||
|
||||
ftd2xx.build:
|
||||
@echo "Nothing to do for: $@"
|
||||
|
||||
ftd2xx.configure:
|
||||
@echo "Nothing to do for: $@"
|
||||
|
||||
ftd2xx.install:
|
||||
@echo "Nothing to do for: $@"
|
||||
|
||||
clean::
|
||||
rm -rf ${FTD2XX_WIN32_DIR}
|
||||
|
||||
ftd2xx.all: ftd2xx.unpack ftd2xx.configure \
|
||||
ftd2xx.build ftd2xx.install
|
||||
|
||||
|
||||
#========================================-
|
||||
# LIBFTDI - requires LIBCONFUSE..
|
||||
# So we handle it here :-(
|
||||
|
||||
libconfuse.download:
|
||||
mkdir -p virgins
|
||||
wget -O ${LIBCONFUSE_TARFILE_LOCAL} \
|
||||
${LIBCONFUSE_TARFILE_URL}
|
||||
|
||||
libconfuse.unpack:
|
||||
tar xfz ${LIBCONFUSE_TARFILE_LOCAL}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBCONFUSE_SRC_DIR}
|
||||
|
||||
libconfuse.configure:
|
||||
rm -rf ${LIBCONFUSE_BUILD_DIR}
|
||||
mkdir -p ${LIBCONFUSE_BUILD_DIR}
|
||||
cd ${LIBCONFUSE_BUILD_DIR} && \
|
||||
${LIBCONFUSE_SRC_DIR}/configure \
|
||||
--prefix=${PREFIX}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBCONFUSE_BUILD_DIR}
|
||||
|
||||
libconfuse.build:
|
||||
cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE}
|
||||
|
||||
libconfuse.install:
|
||||
cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE} install
|
||||
|
||||
libconfuse.all: libconfuse.unpack libconfuse.configure \
|
||||
libconfuse.build libconfuse.install
|
||||
|
||||
#========================================
|
||||
# LIBFTDI - the open source (and free)
|
||||
# alternative to (closed) FTD2XX drivers.
|
||||
|
||||
libftdi.download:
|
||||
mkdir -p virgins
|
||||
wget -O ${LIBFTDI_TARFILE_LOCAL} \
|
||||
${LIBFTDI_TARFILE_URL}
|
||||
|
||||
libftdi.unpack:
|
||||
tar xfz ${LIBFTDI_TARFILE_LOCAL}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBFTDI_SRC_DIR}
|
||||
|
||||
libftdi.configure:
|
||||
rm -rf ${LIBFTDI_BUILD_DIR}
|
||||
mkdir -p ${LIBFTDI_BUILD_DIR}
|
||||
cd ${LIBFTDI_BUILD_DIR} && \
|
||||
${LIBFTDI_SRC_DIR}/configure \
|
||||
--prefix=${PREFIX}
|
||||
|
||||
clean::
|
||||
rm -rf ${LIBFTDI_BUILD_DIR}
|
||||
|
||||
libftdi.build:
|
||||
cd ${LIBFTDI_BUILD_DIR} && ${MAKE}
|
||||
|
||||
libftdi.install:
|
||||
cd ${LIBFTDI_BUILD_DIR} && ${MAKE} install
|
||||
|
||||
libftdi.all: libftdi.unpack libftdi.configure \
|
||||
libftdi.build libftdi.install
|
||||
|
||||
#========================================
|
||||
# Openocd...
|
||||
|
||||
openocd.bootstrap:
|
||||
cd ${OPENOCD_SRC_DIR} && bash ./bootstrap
|
||||
|
||||
openocd.configure:
|
||||
rm -rf ${OPENOCD_BUILD_DIR}
|
||||
mkdir -p ${OPENOCD_BUILD_DIR}
|
||||
cd ${OPENOCD_BUILD_DIR} && ${OPENOCD_SRC_DIR}/configure \
|
||||
--prefix=${INSTALL_DIR} \
|
||||
${OPENOCD_CONFIG_OPTIONS}
|
||||
|
||||
openocd.build:
|
||||
cd ${OPENOCD_BUILD_DIR} && ${MAKE}
|
||||
|
||||
openocd.docs:
|
||||
cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE}
|
||||
|
||||
openocd.docs.pdf:
|
||||
cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} pdf
|
||||
|
||||
openocd.docs.html:
|
||||
cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} html
|
||||
|
||||
# fixme:
|
||||
# need to add a "make one huge html file target"
|
||||
|
||||
openocd.install:
|
||||
cd ${OPENOCD_BUILD_DIR} && ${MAKE} install
|
||||
|
||||
#========================================
|
||||
# The world...
|
||||
|
||||
# Manual step.
|
||||
download.all: \
|
||||
ftd2xx.download \
|
||||
libconfuse.download \
|
||||
libftdi.download
|
||||
|
||||
ifeq (x"${FT2232_DRIVER}",x"ftd2xx")
|
||||
prebuild: ftd2xx.all
|
||||
endif
|
||||
|
||||
ifeq (x"${FT2232_DRIVER}",x"libftdi")
|
||||
prebuild: libconfuse.all libftdi.all
|
||||
endif
|
||||
|
||||
remake: \
|
||||
openocd.bootstrap \
|
||||
openocd.configure \
|
||||
openocd.build \
|
||||
openocd.install
|
||||
|
||||
initial.build : download.all prebuild remake
|
||||
|
||||
all:
|
||||
@echo ""
|
||||
@echo " This makefile does not support an 'all' target"
|
||||
@echo ""
|
||||
@echo " If this is your *FIRST* time building... "
|
||||
@echo " Then use this command: \"make initial.build\""
|
||||
@echo ""
|
||||
@echo " The \"default\" target is for openocd developers"
|
||||
@echo " and rebuilds openocd completely.."
|
||||
@echo ""
|
||||
|
||||
default:
|
||||
test -d ${OPENOCD_SRC_DIR} || (echo "Where is: The OPENOCD source?"; exit 1)
|
||||
${MAKE} remake
|
||||
|
||||
whatis_%:
|
||||
@echo ""
|
||||
@echo "Makevariable: $* => ${${*}}"
|
||||
@echo ""
|
||||
|
|
@ -1,58 +0,0 @@
|
|||
|
||||
This makefile is how I Duane Ellis (openocd@duaneellis.com) builds
|
||||
openocd test purposes on Cygwin. I have included it here so others
|
||||
might also make use of the same configuration that I use to develop
|
||||
Openocd.
|
||||
|
||||
--Duane Ellis
|
||||
|
||||
To make use of it do the following:
|
||||
|
||||
(1) Check out openocd in the standard way.
|
||||
|
||||
For example - in cygwin, type this:
|
||||
|
||||
bash$ mkdir -p /home/duane/test
|
||||
bash$ cd /home/duane/test
|
||||
bash$ svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
|
||||
|
||||
(2) COPY this folder "right above" where you have OpenOCD.
|
||||
|
||||
bash$ cd /home/duane/test
|
||||
bash$ cp ./openocd/testing/build.test2/* /home/duane/test/.
|
||||
|
||||
(3) OPTIONALLY
|
||||
|
||||
You might want to review the file "local.uses"
|
||||
Change options and so forth at the top of the file.
|
||||
|
||||
(4) Initially, you need to download some additional files.
|
||||
These include "libftdi", "libconfuse", and the ftd2xx drivers.
|
||||
|
||||
(5) You also need to build the supporting libraries and install them
|
||||
(They are installed "locally" only)
|
||||
|
||||
Type this command:
|
||||
|
||||
bash$ cd /home/duane/test
|
||||
|
||||
bash$ make initial.build
|
||||
|
||||
which: (1) downloads files
|
||||
(2) builds the libs
|
||||
(3) builds OpenOCD
|
||||
|
||||
(6) As you hack upon OpenOCD... to rebuild OpenOCD...
|
||||
|
||||
bash$ cd /home/duane/test
|
||||
|
||||
bash$ make remake
|
||||
|
||||
which: (1) re-bootstraps
|
||||
(2) re-configures
|
||||
(3) re-builds
|
||||
(4) re-installs.
|
||||
|
||||
=======
|
||||
**END**
|
||||
=======
|
||||
|
|
@ -1,161 +0,0 @@
|
|||
# -*- mode: makefile -*-
|
||||
#========================================
|
||||
# DO NOT REMOVE THE LINE BELOW
|
||||
HERE := $(shell pwd)
|
||||
# DO NOT REMOVE THE LINE ABOVE
|
||||
#========================================
|
||||
|
||||
# These are common CYGWIN build settings.
|
||||
# Comment out things you do not want.
|
||||
# Or unComment things you want.
|
||||
|
||||
# PCs always have printer ports...
|
||||
X86_PRINTER_PORT ?= y
|
||||
|
||||
# Chose *ONE* of these three solutions.
|
||||
#FTD2232_DRIVER = none
|
||||
FT2232_DRIVER = ftd2xx
|
||||
#FT2232_DRIVER = libftdi
|
||||
|
||||
# Do you have "libusb" installed?
|
||||
ifeq (x"${FT2232_DRIVER}",x"libftdi")
|
||||
# With LIBFTDI... LIBUSB is manditory.
|
||||
USE_LIBUSB = y
|
||||
endif
|
||||
|
||||
# By default... we assume libusb not present.
|
||||
USE_LIBUSB ?= n
|
||||
|
||||
#========================================
|
||||
# DO NOT EDIT SETTINGS BELOW THIS LINE
|
||||
#========================================
|
||||
|
||||
|
||||
|
||||
#========================================
|
||||
# House keeping...
|
||||
|
||||
# Solve problems on systems with DASH.. Grrr...
|
||||
SHELL=/bin/bash
|
||||
export SHELL
|
||||
|
||||
VIRGINS ?= ${HERE}/virgins
|
||||
INSTALL_DIR ?= $(HERE)/install
|
||||
PREFIX ?= ${INSTALL_DIR}
|
||||
|
||||
# Determine the build platform.
|
||||
BUILD_SYSNAME_Linux =linux
|
||||
BUILD_SYSNAME_linux =linux
|
||||
BUILD_SYSNAME_CYGWIN_NT =cygwin
|
||||
BUILD_SYSNAME_MINGW32_NT =mingw32
|
||||
BUILD_SYSNAME_Darwin =darwin
|
||||
BUILD_SYSNAME_darwin =darwin
|
||||
BUILD_SYSNAME :=$(BUILD_SYSNAME_$(shell uname --sysname | cut -d'-' -f1))
|
||||
|
||||
# And machine (ie: i686, x86_64, or what ever)
|
||||
BUILD_MACHINE :=$(BUILD_SYSNAME).$(shell uname -m)
|
||||
|
||||
|
||||
#========================================
|
||||
#
|
||||
|
||||
FTD2XX_LINUX_VERSION=0.4.16
|
||||
FTD2XX_LINUX_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}
|
||||
FTD2XX_LINUX_64_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64
|
||||
|
||||
|
||||
# Wiggler type interfaces are here.
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-gw16012
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio
|
||||
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-amtjtagaccel
|
||||
|
||||
|
||||
# FTD2XX only supports these
|
||||
OPENOCD_CONFIG_OPTIONS_ft2232_none =
|
||||
OPENOCD_CONFIG_OPTIONS_ft2232_ftd2xx = --enable-ft2232_ftd2xx --enable-presto_ftd2xx --with-ftd2xx-win32-zipdir=${FTD2XX_WIN32_DIR}
|
||||
OPENOCD_CONFIG_OPTIONS_ft2232_libftdi = --enable-ft2232_libftdi --enable-presto_libftdi
|
||||
|
||||
# LIBUSB - adds support for these.
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-jlink
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-rlink
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-vsllink
|
||||
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog
|
||||
|
||||
#========================================
|
||||
# EXPLICITY NOT SUPPORTED INTERFACES
|
||||
#
|
||||
# zy1000.c
|
||||
# This is a standalone hardware box
|
||||
# it is *NOT* a cygwin thing.
|
||||
#
|
||||
# at91rm9200.c
|
||||
# This is a uC/Linux (or linux) that
|
||||
# runs uC/Linux and uses the gpio pins
|
||||
# to bit-bang JTAG stuff.
|
||||
#
|
||||
# ep93xx.c
|
||||
# Just like at91rm9200 - different chip.
|
||||
|
||||
#========================================
|
||||
# Build OPENOCD config options...
|
||||
# Always enable "dummy"
|
||||
OPENOCD_CONFIG_OPTIONS += --enable-dummy
|
||||
#
|
||||
# Today: Cannot enable 'oocd_trace' on cygwin.
|
||||
# it assumes/uses termios functions like
|
||||
# cfmakeraw() which do not exist on cygwin.
|
||||
#
|
||||
#OPENOCD_CONFIG_OPTIONS += --enable-oocd-trace
|
||||
#
|
||||
# Add printer options..
|
||||
OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_printer_${X86_PRINTER_PORT}}
|
||||
|
||||
# Add the FTD2232 based options.
|
||||
OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_ft2232_${FT2232_DRIVER}}
|
||||
|
||||
# Add LIBUSB based options.
|
||||
OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_libusb_${USE_LIBUSB}}
|
||||
|
||||
|
||||
#========================================
|
||||
# WARNING... the file on the ftdi chip site has a SPACE in the filename GRRR!!!
|
||||
# We fix that with the "-O" option to wget.
|
||||
FTD2XX_WIN32_VERSION=2.04.14
|
||||
FTD2XX_WIN32_DIR = ${HERE}/ftd2xx.win32
|
||||
|
||||
FTD2XX_ZIPFILE_LOCAL=${VIRGINS}/cdm.${FTD2XX_WIN32_VERSION}.zip
|
||||
# Damn thing has a space in the F-ing filename!
|
||||
FTD2XX_ZIPFILE_URL ="http://www.ftdichip.com/Drivers/CDM/CDM ${FTD2XX_WIN32_VERSION}.zip"
|
||||
|
||||
|
||||
#========================================
|
||||
# LIBCONFUSE - used by LIBFTDI..
|
||||
LIBCONFUSE_VERSION=2.5
|
||||
LIBCONFUSE_TARFILE_LOCAL=${VIRGINS}/confuse-${LIBCONFUSE_VERSION}.tar.gz
|
||||
LIBCONFUSE_TARFILE_URL =http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/confuse-${LIBCONFUSE_VERSION}.tar.gz
|
||||
|
||||
LIBCONFUSE_SRC_DIR =${HERE}/confuse-${LIBCONFUSE_VERSION}
|
||||
LIBCONFUSE_BUILD_DIR =${HERE}/confuse-build
|
||||
|
||||
|
||||
#========================================
|
||||
# LIBFTDI... (which uses libusb, and libconfuse)
|
||||
LIBFTDI_VERSION=0.14
|
||||
LIBFTDI_TARFILE_LOCAL = ${VIRGINS}/libftdi-${LIBFTDI_VERSION}.tar.gz
|
||||
LIBFTDI_TARFILE_URL = http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${LIBFTDI_VERSION}.tar.gz
|
||||
|
||||
LIBFTDI_SRC_DIR = ${HERE}/libftdi-${LIBFTDI_VERSION}
|
||||
LIBFTDI_BUILD_DIR= ${HERE}/libftdi-build
|
||||
|
||||
#========================================
|
||||
# Finally - OpenOCD...
|
||||
#
|
||||
OPENOCD_BUILD_DIR =${HERE}/openocd-build
|
||||
OPENOCD_SRC_DIR =${HERE}/openocd
|
||||
|
||||
#========================================
|
||||
# END ..
|
||||
#========================================
|
||||
Loading…
Reference in New Issue