imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

document new flash syntax 

Updates the user documentation with the new syntax for defining
flash and nand banks.
This commit is contained in:
Zachary T Welch 2009-11-18 03:16:37 -08:00
parent 3e1f5e7c64
commit 4b18ef15a3
1 changed files with 6 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
doc/openocd.texi
View File

@ -3540,7 +3540,7 @@ board by (re)installing working boot firmware.
@section Flash Configuration Commands
@cindex flash configuration
@deffn {Config Command} {flash bank} driver base size chip_width bus_width target [driver_options]
@deffn {Config Command} {flash bank} name driver base size chip_width bus_width target [driver_options]
Configures a flash bank which provides persistent storage
for addresses from @math{base} to @math{base + size - 1}.
These banks will often be visible to GDB through the target's memory map.
@ -3548,6 +3548,8 @@ In some cases, configuring a flash bank will activate extra commands;
see the driver-specific documentation.
@itemize @bullet
@item @var{name} ... may be used to reference the flash bank
in other flash commands.
@item @var{driver} ... identifies the controller driver
associated with the flash bank being declared.
This is usually @code{cfi} for external flash, or else
@ -4456,7 +4458,7 @@ NAND chips must be declared in configuration scripts,
plus some additional configuration that's done after
OpenOCD has initialized.
@deffn {Config Command} {nand device} controller target [configparams...]
@deffn {Config Command} {nand device} name controller target [configparams...]
Declares a NAND device, which can be read and written to
after it has been configured through @command{nand probe}.
In OpenOCD, devices are single chips; this is unlike some
@ -4470,6 +4472,8 @@ initialization has completed. Use it in board specific
configuration files, not interactively.
@itemize @bullet
@item @var{name} ... may be used to reference the NAND bank
in other commands.
@item @var{controller} ... identifies the controller driver
associated with the NAND device being declared.
@xref{NAND Driver List}.