tcl: add SPDX tag

For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
	fgrep -rL SPDX tcl | while read a;do \
	sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
	}' $a;done

With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.

Change-Id: Ief3da306a6e1978de7dfb8f552f9ff23151f9944
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7030
Tested-by: jenkins
This commit is contained in:
Antonio Borneo 2022-06-12 23:51:51 +02:00
parent 3bccc77999
commit 573a39b36c
54 changed files with 101 additions and 0 deletions

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
#----------------------------------------
# Purpose - Create some $BIT variables
# Create $K and $M variables

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set AIC_SMR [expr {$AT91C_BASE_AIC + 0x00000000} ]
global AIC_SMR
set AIC_SVR [expr {$AT91C_BASE_AIC + 0x00000080} ]

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set PIO_PER 0x00 ;# Enable Register
set PIO_PDR 0x04 ;# Disable Register
set PIO_PSR 0x08 ;# Status Register

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set AT91_PMC_SCER [expr {$AT91_PMC + 0x00}] ;# System Clock Enable Register
set AT91_PMC_SCDR [expr {$AT91_PMC + 0x04}] ;# System Clock Disable Register

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set AT91_RSTC_CR [expr {$AT91_RSTC + 0x00}] ;# Reset Controller Control Register
set AT91_RSTC_PROCRST [expr {1 << 0}] ;# Processor Reset
set AT91_RSTC_PERRST [expr {1 << 2}] ;# Peripheral Reset

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set AT91_WDT_CR [expr {$AT91_WDT + 0x00}] ;# Watchdog Control Register
set AT91_WDT_WDRSTT [expr {1 << 0}] ;# Restart
set AT91_WDT_KEY [expr {0xa5 << 24}] ;# KEY Password

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
source [find bitsbytes.tcl]
source [find cpu/arm/arm7tdmi.tcl]
source [find memory.tcl]

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
source [find bitsbytes.tcl]
source [find cpu/arm/arm7tdmi.tcl]
source [find memory.tcl]

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
#
# Peripheral identifiers/interrupts.
#

View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set AT91_MATRIX_MCFG [expr {$AT91_MATRIX + 0x00}] ;# Master Configuration Register #
set AT91_MATRIX_RCB0 [expr {1 << 0}] ;# Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master)

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
#
# Peripheral identifiers/interrupts.
#

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set AT91_MATRIX_MCFG0 [expr {$AT91_MATRIX + 0x00}] ;# Master Configuration Register 0
set AT91_MATRIX_MCFG1 [expr {$AT91_MATRIX + 0x04}] ;# Master Configuration Register 1
set AT91_MATRIX_MCFG2 [expr {$AT91_MATRIX + 0x08}] ;# Master Configuration Register 2

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
uplevel #0 [list source [find chip/atmel/at91/at91sam9_sdramc.cfg]]
uplevel #0 [list source [find chip/atmel/at91/at91_pmc.cfg]]
uplevel #0 [list source [find chip/atmel/at91/at91_pio.cfg]]

View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# SDRAM Controller (SDRAMC) registers
set AT91_SDRAMC_MR [expr {$AT91_SDRAMC + 0x00}] ;# SDRAM Controller Mode Register

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set AT91_SMC_READMODE [expr {1 << 0}] ;# Read Mode
set AT91_SMC_WRITEMODE [expr {1 << 1}] ;# Write Mode
set AT91_SMC_EXNWMODE [expr {3 << 4}] ;# NWAIT Mode

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# External Memory Map
set AT91_CHIPSELECT_0 0x10000000
set AT91_CHIPSELECT_1 0x20000000

View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-or-later
if [info exists AT91C_MAINOSC_FREQ] {
# user set this... let it be.

View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set RTTC_RTMR [expr {$AT91C_BASE_RTTC + 0x00}]
set RTTC_RTAR [expr {$AT91C_BASE_RTTC + 0x04}]

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Setup register
#
# ncs_read_setup

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# the DBGU and USARTs are 'almost' indentical'
set DBGU_CR [expr {$AT91C_BASE_DBGU + 0x00000000}]
set DBGU_MR [expr {$AT91C_BASE_DBGU + 0x00000004}]

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Quirks to bypass missing SRST on JTAG connector
# EVALSPEAr310 Rev. 2.0
# http://www.st.com/spear

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Generic init scripts for all ST SPEAr3xx family
# http://www.st.com/spear
#

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Init scripts to configure DDR controller of SPEAr3xx
# http://www.st.com/spear
# Original values taken from XLoader source code

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
source [find bitsbytes.tcl]
source [find cpu/arm/cortex_m3.tcl]
source [find memory.tcl]

View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set RCC_CR [expr {$RCC_BASE + 0x00}]
set RCC_CFGR [expr {$RCC_BASE + 0x04}]

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# /* Peripheral and SRAM base address in the alias region */
set PERIPH_BB_BASE 0x42000000
set SRAM_BB_BASE 0x22000000

View File

@ -1 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-or-later
source [find chip/ti/lm3s/lm3s_regs.tcl]

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
#*****************************************************************************
#
# The following are defines for the System Control register addresses.

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Altera MAXV 5M24OZ/5M570Z CPLD
# see MAX V Device Handbook
# Table 6-3: 32-Bit MAX V Device IDCODE

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Altera MAXII EPM240T100C CPLD
if { [info exists CHIPNAME] } {

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set _USER1 0x02
if { [info exists JTAGSPI_IR] } {

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Lattice ispMACH 4000ZE family, device LC4032ZE
# just configure a tap
jtag newtap LC4032ZE tap -irlen 8 -expected-id 0x01806043

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# xilinx spartan6
# http://www.xilinx.com/support/documentation/user_guides/ug380.pdf

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# xilinx series 7 (artix, kintex, virtex)
# http://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
#xilinx coolrunner xcr3256
#simple device - just configure a tap
jtag newtap xcr tap -irlen 5 -ircapture 0x01 -irmask 0x1f -expected-id 0x0494c093

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Xilinx Ultrascale (Kintex, Virtex, Zynq)
# https://www.xilinx.com/support/documentation/user_guides/ug570-ultrascale-configuration.pdf

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set CPU_TYPE arm
set CPU_NAME arm7tdmi
set CPU_ARCH armv4t

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set CPU_TYPE arm
set CPU_NAME arm920
set CPU_ARCH armv4t

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set CPU_TYPE arm
set CPU_NAME arm946
set CPU_ARCH armv5te

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set CPU_TYPE arm
set CPU_NAME arm966
set CPU_ARCH armv5te

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
set CPU_TYPE arm
set CPU_NAME cortex_m3
set CPU_ARCH armv7

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# see MAX 10 FPGA Device Architecture
# Table 3-1: IDCODE Information for MAX 10 Devices
# Intel MAX 10M02 0x31810dd

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Altera Cyclone III EP3C10
# see Cyclone III Device Handbook, Volume 1;
# Table 145. 32-Bit Cyclone III Device IDCODE

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
proc xilinx_dna_addr {chip} {
array set addrs {
Spartan6 0x30

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Xilinx XADC support for 7 Series FPGAs
#
# The 7 Series FPGAs contain an on-chip 12 bit ADC that can probe die

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Helper for common memory read/modify/write procedures
# mrw: "memory read word", returns value of $reg

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# MEMORY
#
# All Memory regions have two components.

View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-or-later
proc proc_exists { NAME } {
set n [info commands $NAME]

View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-or-later
add_help_text selftest "run selftest using working ram <tmpfile> <address> <size>"

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
adapter srst delay 200
jtag_ntrst_delay 200

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
echo "\n\nFirmware recovery helpers"
echo "Use -c firmware_help to get help\n"

View File

@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Algorithms by Michael Barr, released into public domain
# Ported to OpenOCD by Shane Volpe, additional fixes by Paul Fertser