imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

tcl/target: add BCM2837 configuration file 

This is the Broadcom chip used in the Raspberry Pi 3,
and in later models of the Raspberry Pi 2.

Partial information is available in raspberry pi website:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837b0

Change-Id: I1188a7866304c59f670a543809aca3927174786e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6069
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is contained in:
Tarek BOCHKATI 2021-02-20 23:40:56 +01:00 committed by Antonio Borneo
parent f9b5e34e39
commit 77e1841f64
1 changed files with 64 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
tcl/target/bcm2837.cfg Normal file
View File

@ -0,0 +1,64 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# This is the Broadcom chip used in the Raspberry Pi 3,
# and in later models of the Raspberry Pi 2.
# Partial information is available in raspberry pi website:
# https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837
# https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837b0
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME bcm2837
}
if { [info exists CHIPCORES] } {
set _cores $CHIPCORES
} else {
set _cores 4
}
if { [info exists USE_SMP] } {
set _USE_SMP $USE_SMP
} else {
set _USE_SMP 0
}
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
} else {
set _DAP_TAPID 0x4ba00477
}
jtag newtap $_CHIPNAME cpu -expected-id $_DAP_TAPID -irlen 4
adapter speed 4000
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
# MEM-AP for direct access
target create $_CHIPNAME.ap mem_ap -dap $_CHIPNAME.dap -ap-num 0
# these addresses are obtained from the ROM table via 'dap info 0' command
set _DBGBASE {0x80010000 0x80012000 0x80014000 0x80016000}
set _CTIBASE {0x80018000 0x80019000 0x8001a000 0x8001b000}
set _smp_command "target smp"
for { set _core 0 } { $_core < $_cores } { incr _core } {
set _CTINAME $_CHIPNAME.cti$_core
set _TARGETNAME $_CHIPNAME.cpu$_core
cti create $_CTINAME -dap $_CHIPNAME.dap -ap-num 0 -baseaddr [lindex $_CTIBASE $_core]
target create $_TARGETNAME aarch64 -dap $_CHIPNAME.dap -ap-num 0 -dbgbase [lindex $_DBGBASE $_core] -cti $_CTINAME
$_TARGETNAME configure -event reset-assert-post { aarch64 dbginit }
set _smp_command "$_smp_command $_TARGETNAME"
}
if {$_USE_SMP} {
eval $_smp_command
}
# default target is cpu0
targets $_CHIPNAME.cpu0