imi415/openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ft2232: Set PWR_RST and LOOPBACK for xds100v2

Browse Source 
The CPLD on the xds100v2 expects to see a rising edge on PWR_RST to
enable the outputs.  This patch creates that transition correctly by
fixing the direction register for PWR_RST.

THe CPLD will also loop back the data if the LOOPBACK signal is
asserted.  Set this signal to an output and keep it clear.

This was tested with a TI DM3730 Beagleboard xM.

Change-Id: I4ea216bef6ae5c40e935741af5c69dc844d5d494
Signed-off-by: Kyle Manna <kyle.manna@fuel7.com>
Reviewed-on: http://openocd.zylin.com/189
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Kyle Manna 2011-10-22 00:27:36 -05:00 committed by Spencer Oliver
parent 36cc893086
commit 87552bc1d3
1 changed files with 39 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

53
src/jtag/drivers/ft2232.c
View File

@ -3175,40 +3175,65 @@ static int flossjtag_init(void)
return ftx232_dbus_write();
}
/*
* The reference schematic from TI for the XDS100v2 has a CPLD on which opens
* the door for a number of different configurations
*
* Known Implementations:
* http://processors.wiki.ti.com/images/9/93/TMS570LS20216_USB_STICK_Schematic.pdf
*
* http://processors.wiki.ti.com/index.php/XDS100 (rev2)
* * CLPD logic: Rising edge to enable outputs (XDS100_PWR_RST)
* * ACBUS3 to transition 0->1 (OE rising edge)
* * CPLD logic: Put the EMU0/1 pins in Hi-Z:
* * ADBUS5/GPIOL1 = EMU_EN = 1
* * ADBUS6/GPIOL2 = EMU0 = 0
* * ACBUS4/SPARE0 = EMU1 = 0
* * CPLD logic: Disable loopback
* * ACBUS6/SPARE2 = LOOPBACK = 0
*/
#define XDS100_nEMU_EN (1<<5)
#define XDS100_nEMU0 (1<<6)
#define XDS100_PWR_RST (1<<3)
#define XDS100_nEMU1 (1<<4)
#define XDS100_LOOPBACK (1<<6)
static int xds100v2_init(void)
{
low_output = 0x3A;
low_direction = 0x7B;
/* These are in the lower byte */
nTRST = 0x10;
nTRSTnOE = 0x10;
/* These aren't actually used on 14 pin connectors */
/* These are in the upper byte */
nSRST = 0x01;
nSRSTnOE = 0x01;
low_output = 0x08 | nTRST | XDS100_nEMU_EN;
low_direction = 0x0b | nTRSTnOE | XDS100_nEMU_EN | XDS100_nEMU0;
/* initialize low byte for jtag */
if (ft2232_set_data_bits_low_byte(low_output,low_direction) != ERROR_OK)
{
LOG_ERROR("couldn't initialize FT2232 with 'xds100v2' layout");
return ERROR_JTAG_INIT_FAILED;
}
nTRST = 0x10;
nTRSTnOE = 0x0; /* not output enable for nTRST */
nSRST = 0x00; /* TODO: SRST is not supported yet */
nSRSTnOE = 0x00; /* no output enable for nSRST */
high_output = 0x00;
high_direction = 0x59;
high_output = 0;
high_direction = nSRSTnOE | XDS100_LOOPBACK | XDS100_PWR_RST | XDS100_nEMU1;
/* initialize high byte for jtag */
if (ft2232_set_data_bits_high_byte(high_output,high_direction) != ERROR_OK)
{
LOG_ERROR("couldn't initialize FT2232 with 'xds100v2' layout");
LOG_ERROR("couldn't put CPLD in to reset with 'xds100v2' layout");
return ERROR_JTAG_INIT_FAILED;
}
high_output = 0x86;
high_direction = 0x59;
high_output |= XDS100_PWR_RST;
/* initialize high byte for jtag */
if (ft2232_set_data_bits_high_byte(high_output,high_direction) != ERROR_OK)
{
LOG_ERROR("couldn't initialize FT2232 with 'xds100v2' layout");
LOG_ERROR("couldn't bring CPLD out of reset with 'xds100v2' layout");
return ERROR_JTAG_INIT_FAILED;
}