Alan Carvalho de Assis <acassis@gmail.com> imx31pdk.cfg reset init event

git-svn-id: svn://svn.berlios.de/openocd/trunk@1322 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
oharboe 2009-01-15 13:09:20 +00:00
parent 9094500ba6
commit 8fc9bcb7f5
2 changed files with 106 additions and 97 deletions

View File

@ -0,0 +1,101 @@
# The IMX31PDK eval board has a single IMX31 chip
source [find target/imx31.cfg]
$_TARGETNAME configure -event gdb-attach { reset init }
$_TARGETNAME configure -event reset-init { imx31pdk_init }
proc imx31pdk_init { } {
# This setup puts RAM at 0x80000000
# reset the board correctly
reset run
reset halt
# ========================================
# Init CCM
# ========================================
mww 0x53FC0000 0x040
mww 0x53F80000 0x074B0B7D
sleep 100
# ========================================
# 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
# ========================================
mww 0x53F80004 0xFF871D50
mww 0x53F80010 0x00271C1B
# ========================================
# Configure CPLD on CS5
# ========================================
mww 0xb8002050 0x0000DCF6
mww 0xb8002054 0x444A4541
mww 0xb8002058 0x44443302
# ========================================
# SDCLK
# ========================================
mww 0x43FAC26C 0
# ========================================
# CAS
# ========================================
mww 0x43FAC270 0
# ========================================
# RAS
# ========================================
mww 0x43FAC274 0
# ========================================
# CS2 (CSD0)
# ========================================
mww 0x43FAC27C 0x1000
# ========================================
# DQM3
# ========================================
mww 0x43FAC284 0
# ========================================
# DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
# ========================================
mww 0x43FAC288 0
mww 0x43FAC28C 0
mww 0x43FAC290 0
mww 0x43FAC294 0
mww 0x43FAC298 0
mww 0x43FAC29C 0
mww 0x43FAC2A0 0
mww 0x43FAC2A4 0
mww 0x43FAC2A8 0
mww 0x43FAC2AC 0
mww 0x43FAC2B0 0
mww 0x43FAC2B4 0
mww 0x43FAC2B8 0
mww 0x43FAC2BC 0
mww 0x43FAC2C0 0
mww 0x43FAC2C4 0
mww 0x43FAC2C8 0
mww 0x43FAC2CC 0
mww 0x43FAC2D0 0
mww 0x43FAC2D4 0
mww 0x43FAC2D8 0
mww 0x43FAC2DC 0
# ========================================
# Initialization script for 32 bit DDR on MX31 PDK
# ========================================
mww 0xB8001010 0x00000004
mww 0xB8001004 0x006ac73a
mww 0xB8001000 0x92100000
mww 0x80000f00 0x12344321
mww 0xB8001000 0xa2100000
mww 0x80000000 0x12344321
mww 0x80000000 0x12344321
mww 0xB8001000 0xb2100000
mwb 0x80000033 0xda
mwb 0x81000000 0xff
mww 0xB8001000 0x82226080
mww 0x80000000 0xDEADBEEF
mww 0xB8001010 0x0000000c
}

View File

@ -1,4 +1,8 @@
echo Setting up for the FreeScale iMX31 Board.\n
echo Script to load ledtest on iMX31PDK.\n
# Note: you need to startup openocd with "-f board/imx31pdk.cfg"
# in order to it initialize RAM memory.
# SETUP GDB :
#
# Common gdb setup for ARM CPUs
@ -9,104 +13,8 @@ set prompt (arm-gdb)
set endian little
dir .
# DEFINE MACROS :
#
# Create a "refresh" macro to update gdb's screens after the cpu
# has been stopped by the other CPU or following an "monitor allstop"
define refresh
monitor set hbreak
cont
monitor clear hbreak
end
# CONNECT TO TARGET :
target remote 127.0.0.1:3333
monitor reset run
#FIX!!!! should be reset init!
monitor reset halt
# iMX31 PDK board initialization commands:
#// init_ccm
monitor mww 0x53FC0000 0x040
monitor mww 0x53F80000 0x074B0B7D
#//532-133-66.5
#//monitor mww 0x53F80004 0xFF871D58
#//monitor mww 0x53F80010 0x0033280C
#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
monitor mww 0x53F80004 0xFF871D50
monitor mww 0x53F80010 0x00271C1B
#// 208-104-52
#//monitor mww 0x53F80004 0xFF871D48
#//monitor mww 0x53F80010 0x04002000
#// Configure CPLD on CS5
monitor mww 0xb8002050 0x0000DCF6
monitor mww 0xb8002054 0x444A4541
monitor mww 0xb8002058 0x44443302
#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits
#// in SW_PAD_CTL registers
#// SDCLK
monitor mww 0x43FAC26C 0
#// CAS
monitor mww 0x43FAC270 0
#// RAS
monitor mww 0x43FAC274 0
#// CS2 (CSD0)
monitor mww 0x43FAC27C 0x1000
#// DQM3
monitor mww 0x43FAC284 0
#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
monitor mww 0x43FAC288 0
monitor mww 0x43FAC28C 0
monitor mww 0x43FAC290 0
monitor mww 0x43FAC294 0
monitor mww 0x43FAC298 0
monitor mww 0x43FAC29C 0
monitor mww 0x43FAC2A0 0
monitor mww 0x43FAC2A4 0
monitor mww 0x43FAC2A8 0
monitor mww 0x43FAC2AC 0
monitor mww 0x43FAC2B0 0
monitor mww 0x43FAC2B4 0
monitor mww 0x43FAC2B8 0
monitor mww 0x43FAC2BC 0
monitor mww 0x43FAC2C0 0
monitor mww 0x43FAC2C4 0
monitor mww 0x43FAC2C8 0
monitor mww 0x43FAC2CC 0
monitor mww 0x43FAC2D0 0
monitor mww 0x43FAC2D4 0
monitor mww 0x43FAC2D8 0
monitor mww 0x43FAC2DC 0
#// Initialization script for 32 bit DDR on MX31 PDK
monitor mww 0xB8001010 0x00000004
monitor mww 0xB8001004 0x006ac73a
monitor mww 0xB8001000 0x92100000
monitor mww 0x80000f00 0x12344321
monitor mww 0xB8001000 0xa2100000
monitor mww 0x80000000 0x12344321
monitor mww 0x80000000 0x12344321
monitor mww 0xB8001000 0xb2100000
#monitor char 0x80000033 0xda
monitor mwb 0x80000033 0xda
#monitor char 0x81000000 0xff
monitor mwb 0x81000000 0xff
monitor mww 0xB8001000 0x82226080
monitor mww 0x80000000 0xDEADBEEF
monitor mww 0xB8001010 0x0000000c
# LOAD IMAGE :
#