- Replace 'for(' with 'for ('.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2360 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
zwelch 2009-06-23 22:37:21 +00:00
parent 9af5e445b7
commit 95d2a23724
18 changed files with 54 additions and 54 deletions

View File

@ -212,7 +212,7 @@ static uint16_t cfi_query_u16(flash_bank_t *bank, int sector, uint32_t offset)
if (cfi_info->x16_as_x8)
{
uint8_t i;
for(i=0;i<2;i++)
for (i=0;i<2;i++)
target_read_memory(target, flash_address(bank, sector, offset+i), bank->bus_width, 1,
&data[i*bank->bus_width] );
}
@ -234,7 +234,7 @@ static uint32_t cfi_query_u32(flash_bank_t *bank, int sector, uint32_t offset)
if (cfi_info->x16_as_x8)
{
uint8_t i;
for(i=0;i<4;i++)
for (i=0;i<4;i++)
target_read_memory(target, flash_address(bank, sector, offset+i), bank->bus_width, 1,
&data[i*bank->bus_width] );
}

View File

@ -770,13 +770,13 @@ static int handle_flash_fill_command(struct command_context_s *cmd_ctx, char *cm
switch (wordsize)
{
case 4:
for(i = 0; i < chunk_count; i++)
for (i = 0; i < chunk_count; i++)
{
target_buffer_set_u32(target, chunk + i * wordsize, pattern);
}
break;
case 2:
for(i = 0; i < chunk_count; i++)
for (i = 0; i < chunk_count; i++)
{
target_buffer_set_u16(target, chunk + i * wordsize, pattern);
}

View File

@ -77,7 +77,7 @@ int nand_calculate_ecc(struct nand_device_s *device, const uint8_t *dat, uint8_t
reg1 = reg2 = reg3 = 0;
/* Build up column parity */
for(i = 0; i < 256; i++) {
for (i = 0; i < 256; i++) {
/* Get CP0 - CP5 from table */
idx = nand_ecc_precalc_table[*dat++];
reg1 ^= (idx & 0x3f);

View File

@ -620,7 +620,7 @@ static int pic32mx_probe(struct flash_bank_s *bank)
num_pages = 12;
} else {
/* 0xBD000000: Program flash size varies with device */
for(i=0; pic32mx_devs[i].name != NULL; i++)
for (i=0; pic32mx_devs[i].name != NULL; i++)
if (pic32mx_devs[i].devid == ((device_id >> 12) & 0xff)) {
num_pages = pic32mx_devs[i].pfm_size;
break;
@ -704,7 +704,7 @@ static int pic32mx_info(struct flash_bank_s *bank, char *buf, int buf_size)
PIC32MX_MANUF_ID);
return ERROR_FLASH_OPERATION_FAILED;
}
for(i=0; pic32mx_devs[i].name != NULL; i++)
for (i=0; pic32mx_devs[i].name != NULL; i++)
if (pic32mx_devs[i].devid == ((device_id >> 12) & 0xff)) {
printed = snprintf(buf, buf_size, "PIC32MX%s", pic32mx_devs[i].name);
break;

View File

@ -504,7 +504,7 @@ static jim_wide JimPowWide(jim_wide b, jim_wide e)
{
jim_wide i, res = 1;
if ((b==0 && e!=0) || (e<0)) return 0;
for(i=0; i<e; i++) {res *= b;}
for (i=0; i<e; i++) {res *= b;}
return res;
}
@ -10425,7 +10425,7 @@ static int Jim_SwitchCoreCommand(Jim_Interp *interp, int argc,
script = caseList[i+1];
}
}
for(; i < patCount && Jim_CompareStringImmediate(interp, script, "-");
for (; i < patCount && Jim_CompareStringImmediate(interp, script, "-");
i += 2)
script = caseList[i+1];
if (script && Jim_CompareStringImmediate(interp, script, "-")) {
@ -12599,7 +12599,7 @@ Jim_GetOpt_Debug( Jim_GetOptInfo *p )
int x;
Jim_fprintf( p->interp, p->interp->cookie_stderr, "---args---\n");
for( x = 0 ; x < p->argc ; x++ ){
for ( x = 0 ; x < p->argc ; x++ ){
Jim_fprintf( p->interp, p->interp->cookie_stderr,
"%2d) %s\n",
x,
@ -12823,7 +12823,7 @@ Jim_Debug_ArgvString( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
}
debug_string_obj = Jim_NewEmptyStringObj( interp );
for( x = 0 ; x < argc ; x++ ){
for ( x = 0 ; x < argc ; x++ ){
Jim_AppendStrings( interp,
debug_string_obj,
Jim_GetString( argv[x], NULL ),

View File

@ -90,7 +90,7 @@ int add_default_dirs(void)
GetModuleFileName (NULL, strExePath, MAX_PATH);
*strrchr(strExePath, '\\')=0;
strcat(strExePath, "/../lib/"PACKAGE);
for(p=strExePath; *p; p++) {
for (p=strExePath; *p; p++) {
if (*p == '\\')
*p = '/';
}

View File

@ -1024,7 +1024,7 @@ int jtag_validate_chain(void)
tap = NULL;
total_ir_length = 0;
for(;;){
for (;;){
tap = jtag_tap_next_enabled(tap);
if ( tap == NULL ){
break;
@ -1048,7 +1048,7 @@ int jtag_validate_chain(void)
tap = NULL;
chain_pos = 0;
int val;
for(;;){
for (;;){
tap = jtag_tap_next_enabled(tap);
if ( tap == NULL ){
break;

View File

@ -359,7 +359,7 @@ tap_state_t tap_state_by_name(const char *name)
{
tap_state_t x;
for( x = 0 ; x < TAP_NUM_STATES ; x++ ){
for ( x = 0 ; x < TAP_NUM_STATES ; x++ ){
/* be nice to the human */
if ( 0 == strcasecmp( name, tap_state_name(x) ) ){
return x;
@ -403,9 +403,9 @@ tap_state_t jtag_debug_state_machine(const void *tms_buf, const void *tdi_buf,
DEBUG_JTAG_IO("TAP/SM: TMS bits: %u (bytes: %u)", tap_bits, tap_bytes);
tap_out_bits = 0;
for(cur_byte = 0; cur_byte < tap_bytes; cur_byte++)
for (cur_byte = 0; cur_byte < tap_bytes; cur_byte++)
{
for(cur_bit = 0; cur_bit < 8; cur_bit++)
for (cur_bit = 0; cur_bit < 8; cur_bit++)
{
// make sure we do not run off the end of the buffers
unsigned tap_bit = cur_byte * 8 + cur_bit;

View File

@ -518,7 +518,7 @@ dtc_run_download(
/* Wait for DTC to finish running command buffer */
for(i = 10;;) {
for (i = 10;;) {
usb_err = ep1_generic_commandl(
pHDev, 4,
@ -711,7 +711,7 @@ dtc_queue_run(void) {
/* The rigamarole with the masks and doing it bit-by-bit is due to the fact that the scan buffer is LSb-first and the DTC code is MSb-first for hardware reasons. It was that or craft a function to do the reversal, and that wouldn't work with bit-stuffing (supplying extra bits to use mostly byte operations), or any other scheme which would throw the byte alignment off. */
for(
for (
rq_p = dtc_queue.rq_head;
rq_p != NULL;
rq_p = rq_next
@ -726,7 +726,7 @@ dtc_queue_run(void) {
dtc_mask = 1 << (8 - 1);
for(
for (
;
bit_cnt;
bit_cnt--
@ -764,7 +764,7 @@ dtc_queue_run(void) {
dtc_mask = 1 << (bit_cnt - 1);
}
for(
for (
;
bit_cnt;
bit_cnt--
@ -834,7 +834,7 @@ tap_state_queue_run(void) {
if (!tap_state_queue.length) return(retval);
bits = 1;
byte = 0;
for(i = tap_state_queue.length; i--;) {
for (i = tap_state_queue.length; i--;) {
byte <<= 1;
if (tap_state_queue.buffer & 1) {
@ -1140,7 +1140,7 @@ rlink_scan(
buffer[scan_size / 8] &= ((1 << ((scan_size - 1) % 8) + 1) - 1);
printf("before scan:");
for(i = 0; i < (scan_size + 7) / 8; i++) {
for (i = 0; i < (scan_size + 7) / 8; i++) {
printf(" %02x", buffer[i]);
}
printf("\n");
@ -1503,7 +1503,7 @@ int rlink_speed(int speed)
speed = rlink_speed_table[rlink_speed_table_size - 1].prescaler;
}
for(i = rlink_speed_table_size; i--; ) {
for (i = rlink_speed_table_size; i--; ) {
if (rlink_speed_table[i].prescaler == speed) {
if (dtc_load_from_buffer(pHDev, rlink_speed_table[i].dtc, rlink_speed_table[i].dtc_size) != 0) {
LOG_ERROR("An error occurred while trying to load DTC code for speed \"%d\".\n", speed);
@ -1534,7 +1534,7 @@ int rlink_speed_div(
) {
int i;
for(i = rlink_speed_table_size; i--; ) {
for (i = rlink_speed_table_size; i--; ) {
if (rlink_speed_table[i].prescaler == speed) {
*khz = rlink_speed_table[i].khz;
return(ERROR_OK);
@ -1558,7 +1558,7 @@ int rlink_khz(
return ERROR_FAIL;
}
for(i = rlink_speed_table_size; i--; ) {
for (i = rlink_speed_table_size; i--; ) {
if (rlink_speed_table[i].khz <= khz) {
*speed = rlink_speed_table[i].prescaler;
return(ERROR_OK);
@ -1630,11 +1630,11 @@ int rlink_init(void)
busses = usb_get_busses();
for(bus = busses; bus; bus = bus->next)
for (bus = busses; bus; bus = bus->next)
{
struct usb_device *dev;
for(dev = bus->devices; dev; dev = dev->next)
for (dev = bus->devices; dev; dev = dev->next)
{
if ( (dev->descriptor.idVendor == USB_IDVENDOR) && (dev->descriptor.idProduct == USB_IDPRODUCT) )
{
@ -1715,7 +1715,7 @@ int rlink_init(void)
/* The device starts out in an unknown state on open. As such, result reads time out, and it's not even known whether the command was accepted. So, for this first command, we issue it repeatedly until its response doesn't time out. Also, if sending a command is going to time out, we'll find that out here. */
/* It must be possible to open the device in such a way that this special magic isn't needed, but, so far, it escapes us. */
for(i = 0; i < 5; i++) {
for (i = 0; i < 5; i++) {
j = ep1_generic_commandl(
pHDev, 1,
EP1_CMD_GET_FWREV

View File

@ -1181,7 +1181,7 @@ static int handle_irscan_command(struct command_context_s *cmd_ctx, char *cmd, c
const char *cpA;
const char *cpS;
cpA = args[ argc-1 ];
for( endstate = 0 ; endstate < TAP_NUM_STATES ; endstate++ ){
for ( endstate = 0 ; endstate < TAP_NUM_STATES ; endstate++ ){
cpS = tap_state_name( endstate );
if ( 0 == strcmp( cpA, cpS ) ){
break;

View File

@ -157,7 +157,7 @@ static __inline__ void interface_jtag_add_dr_out_core(jtag_tap_t *target_tap,
enum tap_state pause_state = TAP_DRSHIFT;
jtag_tap_t *tap, *nextTap;
for(tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap=nextTap)
for (tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap=nextTap)
{
nextTap=jtag_tap_next_enabled(tap);
if (nextTap==NULL)

View File

@ -494,7 +494,7 @@ int interface_jtag_add_ir_scan(int num_fields, const scan_field_t *fields, tap_s
int j;
int scan_size = 0;
jtag_tap_t *tap, *nextTap;
for(tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap=nextTap)
for (tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap=nextTap)
{
nextTap=jtag_tap_next_enabled(tap);
tap_state_t end_state;
@ -563,7 +563,7 @@ int interface_jtag_add_dr_scan(int num_fields, const scan_field_t *fields, tap_s
int j;
jtag_tap_t *tap, *nextTap;
for(tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap=nextTap)
for (tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap=nextTap)
{
nextTap=jtag_tap_next_enabled(tap);
int found=0;

View File

@ -2041,7 +2041,7 @@ int gdb_input_inner(connection_t *connection)
// binary packets spew junk into the debug log stream
char buf[ 50 ];
int x;
for( x = 0 ; (x < 49) && (packet[x] != ':') ; x++ ){
for ( x = 0 ; (x < 49) && (packet[x] != ':') ; x++ ){
buf[x] = packet[x];
}
buf[x] = 0;

View File

@ -763,7 +763,7 @@ int mips_m4k_read_memory(struct target_s *target, uint32_t address, uint32_t siz
uint32_t i, t32;
uint16_t t16;
for(i = 0; i < (count*size); i += size)
for (i = 0; i < (count*size); i += size)
{
switch (size)
{
@ -808,7 +808,7 @@ int mips_m4k_write_memory(struct target_s *target, uint32_t address, uint32_t si
uint32_t i, t32;
uint16_t t16;
for(i = 0; i < (count*size); i += size)
for (i = 0; i < (count*size); i += size)
{
switch (size)
{

View File

@ -3829,7 +3829,7 @@ static int tcl_target_func( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
b = 1;
break;
}
for( x = 0 ; x < c ; x++ ){
for ( x = 0 ; x < c ; x++ ){
e = target_write_memory( target, a, b, 1, target_buf );
if ( e != ERROR_OK ){
Jim_SetResult_sprintf( interp, "Error writing @ 0x%08x: %d\n", (int)(a), e );
@ -3895,36 +3895,36 @@ static int tcl_target_func( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
Jim_fprintf( interp, interp->cookie_stdout, "0x%08x ", (int)(a) );
switch ( b ){
case 4:
for( x = 0 ; (x < 16) && (x < y) ; x += 4 ){
for ( x = 0 ; (x < 16) && (x < y) ; x += 4 ){
z = target_buffer_get_u32( target, &(target_buf[ x * 4 ]) );
Jim_fprintf( interp, interp->cookie_stdout, "%08x ", (int)(z) );
}
for( ; (x < 16) ; x += 4 ){
for ( ; (x < 16) ; x += 4 ){
Jim_fprintf( interp, interp->cookie_stdout, " " );
}
break;
case 2:
for( x = 0 ; (x < 16) && (x < y) ; x += 2 ){
for ( x = 0 ; (x < 16) && (x < y) ; x += 2 ){
z = target_buffer_get_u16( target, &(target_buf[ x * 2 ]) );
Jim_fprintf( interp, interp->cookie_stdout, "%04x ", (int)(z) );
}
for( ; (x < 16) ; x += 2 ){
for ( ; (x < 16) ; x += 2 ){
Jim_fprintf( interp, interp->cookie_stdout, " " );
}
break;
case 1:
default:
for( x = 0 ; (x < 16) && (x < y) ; x += 1 ){
for ( x = 0 ; (x < 16) && (x < y) ; x += 1 ){
z = target_buffer_get_u8( target, &(target_buf[ x * 4 ]) );
Jim_fprintf( interp, interp->cookie_stdout, "%02x ", (int)(z) );
}
for( ; (x < 16) ; x += 1 ){
for ( ; (x < 16) ; x += 1 ){
Jim_fprintf( interp, interp->cookie_stdout, " " );
}
break;
}
/* ascii-ify the bytes */
for( x = 0 ; x < y ; x++ ){
for ( x = 0 ; x < y ; x++ ){
if ( (target_buf[x] >= 0x20) &&
(target_buf[x] <= 0x7e) ){
/* good */
@ -4132,7 +4132,7 @@ static int target_create( Jim_GetOptInfo *goi )
e = Jim_GetOpt_String( goi, &cp2, NULL );
cp = cp2;
/* now does target type exist */
for( x = 0 ; target_types[x] ; x++ ){
for ( x = 0 ; target_types[x] ; x++ ){
if ( 0 == strcmp( cp, target_types[x]->name ) ){
/* found */
break;
@ -4140,7 +4140,7 @@ static int target_create( Jim_GetOptInfo *goi )
}
if ( target_types[x] == NULL ){
Jim_SetResult_sprintf( goi->interp, "Unknown target type %s, try one of ", cp );
for( x = 0 ; target_types[x] ; x++ ){
for ( x = 0 ; target_types[x] ; x++ ){
if ( target_types[x+1] ){
Jim_AppendStrings( goi->interp,
Jim_GetResult(goi->interp),
@ -4313,7 +4313,7 @@ static int jim_target( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
return JIM_ERR;
}
Jim_SetResult( goi.interp, Jim_NewListObj( goi.interp, NULL, 0 ) );
for( x = 0 ; target_types[x] ; x++ ){
for ( x = 0 ; target_types[x] ; x++ ){
Jim_ListAppendElement( goi.interp,
Jim_GetResult(goi.interp),
Jim_NewStringObj( goi.interp, target_types[x]->name, -1 ) );

View File

@ -1783,7 +1783,7 @@ int xscale_full_context(target_t *target)
* we can't enter User mode on an XScale (unpredictable),
* but User shares registers with SYS
*/
for(i = 1; i < 7; i++)
for (i = 1; i < 7; i++)
{
int valid = 1;
@ -1855,7 +1855,7 @@ int xscale_restore_context(target_t *target)
* we can't enter User mode on an XScale (unpredictable),
* but User shares registers with SYS
*/
for(i = 1; i < 7; i++)
for (i = 1; i < 7; i++)
{
int dirty = 0;

View File

@ -366,7 +366,7 @@ static int handle_xsvf_command(struct command_context_s *cmd_ctx, char *cmd, cha
LOG_DEBUG("%s %d", op_name, xsdrsize);
for( attempt=0; attempt<limit; ++attempt )
for ( attempt=0; attempt<limit; ++attempt )
{
scan_field_t field;
@ -836,7 +836,7 @@ static int handle_xsvf_command(struct command_context_s *cmd_ctx, char *cmd, cha
if (limit < 1)
limit = 1;
for( attempt=0; attempt<limit; ++attempt )
for ( attempt=0; attempt<limit; ++attempt )
{
scan_field_t field;

View File

@ -11,11 +11,11 @@ int main(void)
while (1)
{
for(i = 0; i < 500000; i++)
for (i = 0; i < 500000; i++)
mPORTDToggleBits(BIT_0);
for(i = 0; i < 500000; i++)
for (i = 0; i < 500000; i++)
mPORTDToggleBits(BIT_1);
for(i = 0; i < 500000; i++)
for (i = 0; i < 500000; i++)
mPORTDToggleBits(BIT_2);
}