diff --git a/tcl/board/mbed-lpc11u24.cfg b/tcl/board/mbed-lpc11u24.cfg
index 6a5826459..b1ec2a519 100644
--- a/tcl/board/mbed-lpc11u24.cfg
+++ b/tcl/board/mbed-lpc11u24.cfg
@@ -4,10 +4,7 @@
 
 source [find interface/cmsis-dap.cfg]
 
-# increase working area to 8KB
+# NXP LPC11U24 Cortex-M0 with 32kB Flash and 8kB SRAM
 set WORKAREASIZE 0x2000
 
-# chip name
-set CHIPNAME lpc11u24
-
-source [find target/lpc11uxx.cfg]
+source [find target/lpc11xx.cfg]
diff --git a/tcl/target/lpc11uxx.cfg b/tcl/target/lpc11uxx.cfg
deleted file mode 100644
index 2a519fbc7..000000000
--- a/tcl/target/lpc11uxx.cfg
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# NXP lpc11uxx family
-
-source [find target/swj-dp.tcl]
-
-if { [info exists CHIPNAME] } {
-	set _CHIPNAME $CHIPNAME
-} else {
-	set _CHIPNAME lpc11uxx
-}
-
-if { [info exists ENDIAN] } {
-	set _ENDIAN $ENDIAN
-} else {
-	set _ENDIAN little
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 6kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x1800
-}
-
-if { [info exists CPUTAPID] } {
-	set _CPUTAPID $CPUTAPID
-} else {
-	set _CPUTAPID 0x00000000
-}
-
-# delays on reset lines
-adapter_nsrst_delay 100
-#jtag_ntrst_delay 100
-
-swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-#set _FLASHNAME $_CHIPNAME.flash
-#flash bank $_FLASHNAME lpc2000 0 0 0 0 $_TARGETNAME
-
-if {![using_hla]} {
-   # if srst is not fitted use SYSRESETREQ to
-   # perform a soft reset
-   cortex_m reset_config sysresetreq
-}
diff --git a/tcl/target/lpc11xx.cfg b/tcl/target/lpc11xx.cfg
new file mode 100644
index 000000000..7a65c1f47
--- /dev/null
+++ b/tcl/target/lpc11xx.cfg
@@ -0,0 +1,8 @@
+# NXP LPC11xx Cortex-M0 with at least 1kB SRAM
+set CHIPNAME lpc11xx
+set CHIPSERIES lpc1100
+if { ![info exists WORKAREASIZE] } {
+	set WORKAREASIZE 0x400
+}
+
+source [find target/lpc1xxx.cfg]
diff --git a/tcl/target/lpc12xx.cfg b/tcl/target/lpc12xx.cfg
new file mode 100644
index 000000000..a37c6febc
--- /dev/null
+++ b/tcl/target/lpc12xx.cfg
@@ -0,0 +1,8 @@
+# NXP LPC12xx Cortex-M0 with at least 4kB SRAM
+set CHIPNAME lpc12xx
+set CHIPSERIES lpc1200
+if { ![info exists WORKAREASIZE] } {
+	set WORKAREASIZE 0x1000
+}
+
+source [find target/lpc1xxx.cfg]
diff --git a/tcl/target/lpc13xx.cfg b/tcl/target/lpc13xx.cfg
new file mode 100644
index 000000000..3d128c963
--- /dev/null
+++ b/tcl/target/lpc13xx.cfg
@@ -0,0 +1,8 @@
+# NXP LPC13xx Cortex-M3 with at least 4kB SRAM
+set CHIPNAME lpc13xx
+set CHIPSERIES lpc1300
+if { ![info exists WORKAREASIZE] } {
+	set WORKAREASIZE 0x1000
+}
+
+source [find target/lpc1xxx.cfg]
diff --git a/tcl/target/lpc1751.cfg b/tcl/target/lpc1751.cfg
deleted file mode 100644
index 28edddbb0..000000000
--- a/tcl/target/lpc1751.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1751 Cortex-M3 with 32kB Flash and 8kB Local On-Chip SRAM,
-set CHIPNAME lpc1751
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x2000
-set CPUROMSIZE 0x8000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1752.cfg b/tcl/target/lpc1752.cfg
deleted file mode 100644
index 3aae38f1b..000000000
--- a/tcl/target/lpc1752.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1752 Cortex-M3 with 64kB Flash and 16kB Local On-Chip SRAM,
-set CHIPNAME lpc1752
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x4000
-set CPUROMSIZE 0x10000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1754.cfg b/tcl/target/lpc1754.cfg
deleted file mode 100644
index ae2ad50f8..000000000
--- a/tcl/target/lpc1754.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1754 Cortex-M3 with 128kB Flash and 16kB+16kB Local On-Chip SRAM,
-set CHIPNAME lpc1754
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x4000
-set CPUROMSIZE 0x20000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1756.cfg b/tcl/target/lpc1756.cfg
deleted file mode 100644
index 8110727ff..000000000
--- a/tcl/target/lpc1756.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1756 Cortex-M3 with 256kB Flash and 16kB+16kB Local On-Chip SRAM,
-set CHIPNAME lpc1756
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x8000
-set CPUROMSIZE 0x40000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1758.cfg b/tcl/target/lpc1758.cfg
deleted file mode 100644
index 79f662427..000000000
--- a/tcl/target/lpc1758.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1758 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM,
-set CHIPNAME lpc1758
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x8000
-set CPUROMSIZE 0x80000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1759.cfg b/tcl/target/lpc1759.cfg
deleted file mode 100644
index 3560e97a7..000000000
--- a/tcl/target/lpc1759.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1759 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM,
-set CHIPNAME lpc1759
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x8000
-set CPUROMSIZE 0x80000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1763.cfg b/tcl/target/lpc1763.cfg
deleted file mode 100644
index 08a2be3f7..000000000
--- a/tcl/target/lpc1763.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1763 Cortex-M3 with 256kB Flash and 32kB+32kB Local On-Chip SRAM,
-set CHIPNAME lpc1763
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x8000
-set CPUROMSIZE 0x40000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1764.cfg b/tcl/target/lpc1764.cfg
deleted file mode 100644
index df7ab9363..000000000
--- a/tcl/target/lpc1764.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1764 Cortex-M3 with 256kB Flash and 16kB+16kB Local On-Chip SRAM,
-set CHIPNAME lpc1764
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x4000
-set CPUROMSIZE 0x20000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1765.cfg b/tcl/target/lpc1765.cfg
deleted file mode 100644
index 6d8e8ea5c..000000000
--- a/tcl/target/lpc1765.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1765 Cortex-M3 with 256kB Flash and 32kB+1632kB Local On-Chip SRAM,
-set CHIPNAME lpc1765
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x8000
-set CPUROMSIZE 0x40000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1766.cfg b/tcl/target/lpc1766.cfg
deleted file mode 100644
index 8956c0609..000000000
--- a/tcl/target/lpc1766.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1766 Cortex-M3 with 256kB Flash and 16kB+16kB Local On-Chip SRAM,
-set CHIPNAME lpc1766
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x8000
-set CPUROMSIZE 0x40000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1767.cfg b/tcl/target/lpc1767.cfg
deleted file mode 100644
index 825dbebc6..000000000
--- a/tcl/target/lpc1767.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-# !!!!!!!!!!!!
-# ! UNTESTED !
-# !!!!!!!!!!!!
-
-# NXP LPC1767 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM,
-set CHIPNAME lpc1767
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x8000
-set CPUROMSIZE 0x80000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg
deleted file mode 100644
index a436b30f6..000000000
--- a/tcl/target/lpc1768.cfg
+++ /dev/null
@@ -1,17 +0,0 @@
-# NXP LPC1768 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM,
-set CHIPNAME lpc1768
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x8000
-set CPUROMSIZE 0x80000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1769.cfg b/tcl/target/lpc1769.cfg
deleted file mode 100644
index 61ab3ee88..000000000
--- a/tcl/target/lpc1769.cfg
+++ /dev/null
@@ -1,17 +0,0 @@
-# NXP LPC1769 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM,
-set CHIPNAME lpc1769
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x8000
-set CPUROMSIZE 0x80000
-
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 4000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg];
diff --git a/tcl/target/lpc1788.cfg b/tcl/target/lpc1788.cfg
deleted file mode 100644
index 112addd72..000000000
--- a/tcl/target/lpc1788.cfg
+++ /dev/null
@@ -1,17 +0,0 @@
-# NXP LPC1788 Cortex-M3 with 512kB Flash and 64kB Local On-Chip SRAM,
-set CHIPNAME lpc1788
-set CPUTAPID 0x4ba00477
-set CPURAMSIZE 0x10000
-set CPUROMSIZE 0x80000
-
-# After reset the chip is clocked by the ~12MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-set CCLK 12000
-
-#Include the main configuration file.
-source [find target/lpc17xx.cfg]
diff --git a/tcl/target/lpc17xx.cfg b/tcl/target/lpc17xx.cfg
index 062833639..dccf880da 100644
--- a/tcl/target/lpc17xx.cfg
+++ b/tcl/target/lpc17xx.cfg
@@ -1,101 +1,8 @@
-# Main file for NXP LPC17xx Cortex-M3
-#
-# !!!!!!
-#
-# This file should not be included directly, rather
-# by the lpc1751.cfg, lpc1752.cfg, etc. which set the
-# needed variables to the appropriate values.
-#
-# !!!!!!
-
-# LPC17xx chips support both JTAG and SWD transports.
-# Adapt based on what transport is active.
-source [find target/swj-dp.tcl]
-
-if { [info exists CHIPNAME] } {
-	set _CHIPNAME $CHIPNAME
-} else {
-	error "_CHIPNAME not set. Please do not include lpc17xx.cfg directly, but the specific chip configuration file (lpc1751.cfg, lpc1764.cfg, etc)."
+# NXP LPC17xx Cortex-M3 with at least 8kB SRAM
+set CHIPNAME lpc17xx
+set CHIPSERIES lpc1700
+if { ![info exists WORKAREASIZE] } {
+	set WORKAREASIZE 0x2000
 }
 
-# After reset the chip is clocked by the ~4MHz internal RC oscillator.
-# When board-specific code (reset-init handler or device firmware)
-# configures another oscillator and/or PLL0, set CCLK to match; if
-# you don't, then flash erase and write operations may misbehave.
-# (The ROM code doing those updates cares about core clock speed...)
-#
-# CCLK is the core clock frequency in KHz
-if { [info exists CCLK] } {
-	set _CCLK $CCLK
-} else {
-	set _CCLK 4000
-}
-
-if { [info exists CPUTAPID] } {
-	set _CPUTAPID $CPUTAPID
-} else {
-	error "_CPUTAPID not set. Please do not include lpc17xx.cfg directly, but the specific chip configuration file (lpc1751.cfg, lpc1764.cfg, etc)."
-}
-
-if { [info exists CPURAMSIZE] } {
-  set _CPURAMSIZE $CPURAMSIZE
-} else {
-	error "_CPURAMSIZE not set. Please do not include lpc17xx.cfg directly, but the specific chip configuration file (lpc1751.cfg, lpc1764.cfg, etc)."
-}
-
-if { [info exists CPUROMSIZE] } {
-  set _CPUROMSIZE $CPUROMSIZE
-} else {
-	error "_CPUROMSIZE not set. Please do not include lpc17xx.cfg directly, but the specific chip configuration file (lpc1751.cfg, lpc1764.cfg, etc)."
-}
-
-#jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
-swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
-
-# The LPC17xx devices have 8/16/32kB of SRAM In the ARMv7-M "Code" area (at 0x10000000)
-$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_CPURAMSIZE
-
-# The LPC17xx devies have 32/64/128/256/512kB of flash memory, managed by ROM code
-# (including a boot loader which verifies the flash exception table's checksum).
-# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME lpc2000 0x0 $_CPUROMSIZE 0 0 $_TARGETNAME \
-	lpc1700 $_CCLK calc_checksum
-
-# Run with *real slow* clock by default since the
-# boot rom could have been playing with the PLL, so
-# we have no idea what clock the target is running at.
-adapter_khz 10
-
-# delays on reset lines
-adapter_nsrst_delay 200
-if {[using_jtag]} {
- jtag_ntrst_delay 200
-}
-
-$_TARGETNAME configure -event reset-init {
-	# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
-	# "User Flash Mode" where interrupt vectors are _not_ remapped,
-	# and reside in flash instead).
-	#
-	# See Table 612. Memory Mapping Control register (MEMMAP - 0x400F C040) bit description
-	# Bit Symbol Value Description Reset
-	# value
-	# 0 MAP Memory map control. 0
-	# 0 Boot mode. A portion of the Boot ROM is mapped to address 0.
-	# 1 User mode. The on-chip Flash memory is mapped to address 0.
-	# 31:1 - Reserved. The value read from a reserved bit is not defined. NA
-	#
-	# http://ics.nxp.com/support/documents/microcontrollers/?scope=LPC1768&type=user
-
-	mww 0x400FC040 0x01
-}
-
-if {![using_hla]} {
-   # if srst is not fitted use SYSRESETREQ to
-   # perform a soft reset
-   cortex_m reset_config sysresetreq
-}
+source [find target/lpc1xxx.cfg]
diff --git a/tcl/target/lpc1xxx.cfg b/tcl/target/lpc1xxx.cfg
new file mode 100644
index 000000000..60b505212
--- /dev/null
+++ b/tcl/target/lpc1xxx.cfg
@@ -0,0 +1,153 @@
+# Main file for NXP LPC1xxx series Cortex-M0/0+/3 parts
+#
+# !!!!!!
+#
+# This file should not be included directly, rather by the lpc11xx.cfg,
+# lpc13xx.cfg, lpc17xx.cfg, etc. which set the needed variables to the
+# appropriate values.
+#
+# !!!!!!
+
+# LPC11xx chips support only SWD transport.
+# LPC12xx chips support only SWD transport.
+# LPC11Uxx chips support both JTAG and SWD transports.
+# LPC13xx chips support both JTAG and SWD transports.
+# LPC17xx chips support both JTAG and SWD transports.
+# Adapt based on what transport is active.
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+	set _CHIPNAME $CHIPNAME
+} else {
+	error "CHIPNAME not set. Please do not include lpc1xxx.cfg directly, but the specific chip configuration file (lpc11xx.cfg, lpc13xx.cfg, lpc17xx.cfg, etc)."
+}
+
+if { [info exists CHIPSERIES] } {
+	# Validate chip series is supported
+	if { $CHIPSERIES != "lpc1100" && $CHIPSERIES != "lpc1200" && $CHIPSERIES != "lpc1300" && $CHIPSERIES != "lpc1700" } {
+		error "Unsupported LPC1xxx chip series specified."
+	}
+	set _CHIPSERIES $CHIPSERIES
+} else {
+	error "CHIPSERIES not set. Please do not include lpc1xxx.cfg directly, but the specific chip configuration file (lpc11xx.cfg, lpc13xx.cfg, lpc17xx.cfg, etc)."
+}
+
+# After reset, the chip is clocked by an internal RC oscillator.
+# When board-specific code (reset-init handler or device firmware)
+# configures another oscillator and/or PLL0, set CCLK to match; if
+# you don't, then flash erase and write operations may misbehave.
+# (The ROM code doing those updates cares about core clock speed...)
+# CCLK is the core clock frequency in KHz
+if { [info exists CCLK] } {
+	# Allow user override
+	set _CCLK $CCLK
+} else {
+	# LPC11xx/LPC12xx/LPC13xx use a 12MHz one, LPC17xx uses a 4MHz one
+	if { $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" || $_CHIPSERIES == "lpc1300" } {
+		set _CCLK 12000
+	} elseif { $_CHIPSERIES == "lpc1700" } {
+		set _CCLK 4000
+	}
+}
+
+if { [info exists CPUTAPID] } {
+	# Allow user override
+	set _CPUTAPID $CPUTAPID
+} else {
+	# LPC11xx/LPC12xx uses a Cortex M0 core, LPC13xx/LPC17xx use a Cortex M3 core
+	if { $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" } {
+		set _CPUTAPID 0x0bb11477
+	} elseif { $_CHIPSERIES == "lpc1300" || $_CHIPSERIES == "lpc1700" } {
+		if { [using_jtag] } {
+			set _CPUTAPID 0x4ba00477
+		} {
+			set _CPUTAPID 0x2ba01477
+		}
+	}
+}
+
+if { [info exists WORKAREASIZE] } {
+	set _WORKAREASIZE $WORKAREASIZE
+} else {
+	error "WORKAREASIZE is not set. The $CHIPNAME part is available in several Flash and RAM size configurations. Please set WORKAREASIZE."
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+
+# The LPC11xx devices have 2/4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000)
+# The LPC12xx devices have 4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000)
+# The LPC11Uxx devices have 4/6/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000)
+# The LPC13xx devices have 4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000)
+# The LPC17xx devices have 8/16/32kB of SRAM in the ARMv7-M "Code" area (at 0x10000000)
+$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE
+
+# The LPC11xx devies have 8/16/24/32/48/56/64kB of flash memory (at 0x00000000)
+# The LPC12xx devies have 32/48/64/80/96/128kB of flash memory (at 0x00000000)
+# The LPC11Uxx devies have 16/24/32/40/48/64/96/128kB of flash memory (at 0x00000000)
+# The LPC13xx devies have 8/16/32kB of flash memory (at 0x00000000)
+# The LPC17xx devies have 32/64/128/256/512kB of flash memory (at 0x00000000)
+#
+# All are compatible with the "lpc1700" variant of the LPC2000 flash driver
+# (same cmd51 destination boundary alignment, and all three support 256 byte
+# transfers).
+#
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME lpc2000 0x0 0 0 0 $_TARGETNAME \
+	auto $_CCLK calc_checksum
+
+if { $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" || $_CHIPSERIES == "lpc1300" } {
+	# Do not remap 0x0000-0x0200 to anything but the flash (i.e. select
+	# "User Flash Mode" where interrupt vectors are _not_ remapped,
+	# and reside in flash instead).
+	#
+	# Table 8. System memory remap register (SYSMEMREMAP, address 0x4004 8000) bit description
+	# Bit Symbol Value Description
+	# 1:0 MAP          System memory remap
+	#            0x0   Boot Loader Mode. Interrupt vectors are re-mapped to Boot ROM.
+	#            0x1   User RAM Mode. Interrupt vectors are re-mapped to Static RAM.
+	#            0x2   User Flash Mode. Interrupt vectors are not re-mapped and reside in Flash.
+	# 31:2 -     -     Reserved.
+	$_TARGETNAME configure -event reset-init {
+		mww 0x40048000 0x02
+	}
+} elseif { $_CHIPSERIES == "lpc1700" } {
+	# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
+	# "User Flash Mode" where interrupt vectors are _not_ remapped,
+	# and reside in flash instead).
+	#
+	# See Table 612. Memory Mapping Control register (MEMMAP - 0x400F C040) bit description
+	# Bit Symbol Value Description Reset
+	# value
+	# 0 MAP Memory map control. 0
+	# 0 Boot mode. A portion of the Boot ROM is mapped to address 0.
+	# 1 User mode. The on-chip Flash memory is mapped to address 0.
+	# 31:1 - Reserved. The value read from a reserved bit is not defined. NA
+	#
+	# http://ics.nxp.com/support/documents/microcontrollers/?scope=LPC1768&type=user
+	$_TARGETNAME configure -event reset-init {
+		mww 0x400FC040 0x01
+	}
+}
+
+# Run with *real slow* clock by default since the
+# boot rom could have been playing with the PLL, so
+# we have no idea what clock the target is running at.
+adapter_khz 10
+
+# delays on reset lines
+adapter_nsrst_delay 200
+if {[using_jtag]} {
+ jtag_ntrst_delay 200
+}
+
+# LPC11xx/LPC12xx (Cortex M0 core) supports SYSRESETREQ
+# LPC13xx/LPC17xx (Cortex M3 core) supports SYSRESETREQ
+if {![using_hla]} {
+    # if srst is not fitted use SYSRESETREQ to
+    # perform a soft reset
+    cortex_m reset_config sysresetreq
+}