imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

udev rules: add missing Altera USB Blaster devices 

All Altera USB Blaster devices require a dedicated line in the
udev rules, but some USB VID/PID present in interface and board
config file is missing in udev rules.

Add the missing Altera USB Blaster devices in udev rules.
While there, fix an incorrect pair VID/PID that are reported
swapped inside a comment.

Change-Id: I2d67e90b10db99ef2638405585859c1393456f65
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6102
Tested-by: jenkins
This commit is contained in:
Antonio Borneo 2021-03-07 23:49:30 +01:00
parent 5df8488902
commit bc7d36d886
2 changed files with 7 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
contrib/60-openocd.rules
View File

@ -121,6 +121,9 @@ ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0032", MODE="660", GROUP="plugdev",
# Altera USB Blaster
ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="660", GROUP="plugdev", TAG+="uaccess"
# Altera USB Blaster2
ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6010", MODE="660", GROUP="plugdev", TAG+="uaccess"
ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6810", MODE="660", GROUP="plugdev", TAG+="uaccess"
# Amontec JTAGkey-HiSpeed
ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="660", GROUP="plugdev", TAG+="uaccess"
@ -166,6 +169,9 @@ ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002a", MODE="660", GROUP="plugdev",
# Olimex ARM-USB-OCD-H
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002b", MODE="660", GROUP="plugdev", TAG+="uaccess"
# ixo-usb-jtag - Emulation of a Altera Bus Blaster I on a Cypress FX2 IC
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="06ad", MODE="660", GROUP="plugdev", TAG+="uaccess"
# USBprog with OpenOCD firmware
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="660", GROUP="plugdev", TAG+="uaccess"

2
tcl/board/altera_sockit.cfg
View File

@ -12,7 +12,7 @@ adapter driver usb_blaster
source [find target/altera_fpgasoc.cfg]
# If the USB Blaster II were supported, these settings would be needed
#usb_blaster_vid_pid 0x6810 0x09fb
#usb_blaster_vid_pid 0x09fb 0x6810
#usb_blaster_device_desc "USB-Blaster II"
adapter speed 100