imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

flash: stm32f1x: Pad odd byte writes early to avoid 16-bit writes 

For odd byte counts, stm32x_write() pads the last byte and writes it using
a discrete 16-bit access. The stlink debugger can't issue 16-bit writes so
it fails for odd byte writes.

This patch changes stm32x_write() to pad odd byte writes into a new buffer
and use the normal code path with a single block write. The fallback path,
when working area cannot be allocated, has to use 16-bit writes though
which means that sufficient working area is required for stlink and odd
byte writes.

Change-Id: I4c5dc456300b6e1056f76b0095be8aceee3e954f
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/756
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
This commit is contained in:
Andreas Fritiofson 2012-07-20 14:44:22 +02:00 committed by Freddie Chopin
parent b8862229d0
commit c89eb70a20
1 changed files with 54 additions and 59 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

113
src/flash/nor/stm32f1x.c
View File

@ -724,11 +724,7 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
uint32_t words_remaining = (count / 2);
uint32_t bytes_remaining = (count & 0x00000001);
uint32_t address = bank->base + offset;
uint32_t bytes_written = 0;
int retval;
uint8_t *new_buffer = NULL;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
@ -736,76 +732,75 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
}
if (offset & 0x1) {
LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
LOG_ERROR("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
/* If there's an odd number of bytes, the data has to be padded. Duplicate
* the buffer and use the normal code path with a single block write since
* it's probably cheaper than to special case the last odd write using
* discrete accesses. */
if (count & 1) {
new_buffer = malloc(count + 1);
if (new_buffer == NULL) {
LOG_ERROR("odd number of bytes to write and no memory for padding buffer");
return ERROR_FAIL;
}
LOG_INFO("odd number of bytes to write, padding with 0xff");
buffer = memcpy(new_buffer, buffer, count);
buffer[count++] = 0xff;
}
uint32_t words_remaining = count / 2;
int retval, retval2;
/* unlock flash registers */
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
if (retval != ERROR_OK)
return retval;
goto cleanup;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
if (retval != ERROR_OK)
return retval;
goto cleanup;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
if (retval != ERROR_OK)
return retval;
goto cleanup;
/* multiple half words (2-byte) to be programmed? */
if (words_remaining > 0) {
/* try using a block write */
retval = stm32x_write_block(bank, buffer, offset, words_remaining);
if (retval != ERROR_OK) {
if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
/* if block write failed (no sufficient working area),
* we use normal (slow) single dword accesses */
LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
}
} else {
buffer += words_remaining * 2;
address += words_remaining * 2;
words_remaining = 0;
/* try using a block write */
retval = stm32x_write_block(bank, buffer, offset, words_remaining);
if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
/* if block write failed (no sufficient working area),
* we use normal (slow) single halfword accesses */
LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
while (words_remaining > 0) {
uint16_t value;
memcpy(&value, buffer, sizeof(uint16_t));
retval = target_write_u16(target, bank->base + offset, value);
if (retval != ERROR_OK)
goto reset_pg_and_lock;
retval = stm32x_wait_status_busy(bank, 5);
if (retval != ERROR_OK)
goto reset_pg_and_lock;
words_remaining--;
buffer += 2;
offset += 2;
}
}
if ((retval != ERROR_OK) && (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE))
goto reset_pg_and_lock;
while (words_remaining > 0) {
uint16_t value;
memcpy(&value, buffer + bytes_written, sizeof(uint16_t));
retval = target_write_u16(target, address, value);
if (retval != ERROR_OK)
goto reset_pg_and_lock;
retval = stm32x_wait_status_busy(bank, 5);
if (retval != ERROR_OK)
goto reset_pg_and_lock;
bytes_written += 2;
words_remaining--;
address += 2;
}
if (bytes_remaining) {
uint16_t value = 0xffff;
memcpy(&value, buffer + bytes_written, bytes_remaining);
retval = target_write_u16(target, address, value);
if (retval != ERROR_OK)
goto reset_pg_and_lock;
retval = stm32x_wait_status_busy(bank, 5);
if (retval != ERROR_OK)
goto reset_pg_and_lock;
}
return target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
reset_pg_and_lock:
target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
retval2 = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
if (retval == ERROR_OK)
retval = retval2;
cleanup:
if (new_buffer)
free(new_buffer);
return retval;
}