jtag/tcl.c cleanup -- split out "adapter.c"

Clean up the jtag/tcl.c file, which was one of the biggest and
messiest ones in that directory.  Do it by splitting out all the
generic adapter commands to a separate "adapter.c" file (leaving
the "tcl.c" file holding only JTAG utilities).

Also rename the little-used "jtag interface" to "adapter_name", which
should have been at least re-categorized earlier (it's not jtag-only).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This commit is contained in:
David Brownell 2010-03-27 10:07:13 -07:00
parent a092e8d237
commit d60ebc0ab5
6 changed files with 471 additions and 434 deletions

3
NEWS
View File

@ -6,9 +6,10 @@ and other issues not mentioned here.
JTAG Layer:
New driver for "Bus Pirate"
Rename various commands so they're not JTAG-specific
There are migration procedures for these, but you should
There are migration procedures for most of these, but you should
convert your scripts to the new names, since those procedures
will not be around forever.
jtag jinterface ... is now adapter_name
jtag_khz ... is now adapter_khz
jtag_nsrst_delay ... is now adapter_nsrst_delay
jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width

View File

@ -2093,12 +2093,12 @@ target.
@end deffn
@deffn Command {interface_list}
List the interface drivers that have been built into
List the debug adapter drivers that have been built into
the running copy of OpenOCD.
@end deffn
@deffn Command {jtag interface}
Returns the name of the interface driver being used.
@deffn Command {adapter_name}
Returns the name of the debug adapter driver being used.
@end deffn
@section Interface Drivers

View File

@ -53,6 +53,7 @@ minidriver_imp.h: $(MINIDRIVER_IMP_DIR)/minidriver_imp.h
libjtag_la_SOURCES = \
adapter.c \
core.c \
interface.c \
interfaces.c \

459
src/jtag/adapter.c Normal file
View File

@ -0,0 +1,459 @@
/***************************************************************************
* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
* Copyright (C) 2007-2010 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* Copyright (C) 2009 SoftPLC Corporation *
* http://softplc.com *
* dick@softplc.com *
* *
* Copyright (C) 2009 Zachary T Welch *
* zw@superlucidity.net *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "jtag.h"
#include "minidriver.h"
#include "interface.h"
#include "interfaces.h"
#ifdef HAVE_STRINGS_H
#include <strings.h>
#endif
/**
* @file
* Holds support for configuring debug adapters from TCl scripts.
*/
extern struct jtag_interface *jtag_interface;
static int
jim_adapter_name(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
Jim_GetOptInfo goi;
Jim_GetOpt_Setup(&goi, interp, argc-1, argv + 1);
/* return the name of the interface */
/* TCL code might need to know the exact type... */
/* FUTURE: we allow this as a means to "set" the interface. */
if (goi.argc != 0) {
Jim_WrongNumArgs(goi.interp, 1, goi.argv-1, "(no params)");
return JIM_ERR;
}
const char *name = jtag_interface ? jtag_interface->name : NULL;
Jim_SetResultString(goi.interp, name ? : "undefined", -1);
return JIM_OK;
}
static int default_khz(int khz, int *jtag_speed)
{
LOG_ERROR("Translation from khz to jtag_speed not implemented");
return ERROR_FAIL;
}
static int default_speed_div(int speed, int *khz)
{
LOG_ERROR("Translation from jtag_speed to khz not implemented");
return ERROR_FAIL;
}
static int default_power_dropout(int *dropout)
{
*dropout = 0; /* by default we can't detect power dropout */
return ERROR_OK;
}
static int default_srst_asserted(int *srst_asserted)
{
*srst_asserted = 0; /* by default we can't detect srst asserted */
return ERROR_OK;
}
COMMAND_HANDLER(handle_interface_list_command)
{
if (strcmp(CMD_NAME, "interface_list") == 0 && CMD_ARGC > 0)
return ERROR_COMMAND_SYNTAX_ERROR;
command_print(CMD_CTX, "The following debug interfaces are available:");
for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
{
const char *name = jtag_interfaces[i]->name;
command_print(CMD_CTX, "%u: %s", i + 1, name);
}
return ERROR_OK;
}
COMMAND_HANDLER(handle_interface_command)
{
/* check whether the interface is already configured */
if (jtag_interface)
{
LOG_WARNING("Interface already configured, ignoring");
return ERROR_OK;
}
/* interface name is a mandatory argument */
if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
return ERROR_COMMAND_SYNTAX_ERROR;
for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
{
if (strcmp(CMD_ARGV[0], jtag_interfaces[i]->name) != 0)
continue;
if (NULL != jtag_interfaces[i]->commands)
{
int retval = register_commands(CMD_CTX, NULL,
jtag_interfaces[i]->commands);
if (ERROR_OK != retval)
return retval;
}
jtag_interface = jtag_interfaces[i];
if (jtag_interface->khz == NULL)
jtag_interface->khz = default_khz;
if (jtag_interface->speed_div == NULL)
jtag_interface->speed_div = default_speed_div;
if (jtag_interface->power_dropout == NULL)
jtag_interface->power_dropout = default_power_dropout;
if (jtag_interface->srst_asserted == NULL)
jtag_interface->srst_asserted = default_srst_asserted;
return ERROR_OK;
}
/* no valid interface was found (i.e. the configuration option,
* didn't match one of the compiled-in interfaces
*/
LOG_ERROR("The specified debug interface was not found (%s)", CMD_ARGV[0]);
CALL_COMMAND_HANDLER(handle_interface_list_command);
return ERROR_JTAG_INVALID_INTERFACE;
}
COMMAND_HANDLER(handle_reset_config_command)
{
int new_cfg = 0;
int mask = 0;
/* Original versions cared about the order of these tokens:
* reset_config signals [combination [trst_type [srst_type]]]
* They also clobbered the previous configuration even on error.
*
* Here we don't care about the order, and only change values
* which have been explicitly specified.
*/
for (; CMD_ARGC; CMD_ARGC--, CMD_ARGV++) {
int tmp = 0;
int m;
/* gating */
m = RESET_SRST_NO_GATING;
if (strcmp(*CMD_ARGV, "srst_gates_jtag") == 0)
/* default: don't use JTAG while SRST asserted */;
else if (strcmp(*CMD_ARGV, "srst_nogate") == 0)
tmp = RESET_SRST_NO_GATING;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"gating", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* signals */
m = RESET_HAS_TRST | RESET_HAS_SRST;
if (strcmp(*CMD_ARGV, "none") == 0)
tmp = RESET_NONE;
else if (strcmp(*CMD_ARGV, "trst_only") == 0)
tmp = RESET_HAS_TRST;
else if (strcmp(*CMD_ARGV, "srst_only") == 0)
tmp = RESET_HAS_SRST;
else if (strcmp(*CMD_ARGV, "trst_and_srst") == 0)
tmp = RESET_HAS_TRST | RESET_HAS_SRST;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"signal", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* combination (options for broken wiring) */
m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
if (strcmp(*CMD_ARGV, "separate") == 0)
/* separate reset lines - default */;
else if (strcmp(*CMD_ARGV, "srst_pulls_trst") == 0)
tmp |= RESET_SRST_PULLS_TRST;
else if (strcmp(*CMD_ARGV, "trst_pulls_srst") == 0)
tmp |= RESET_TRST_PULLS_SRST;
else if (strcmp(*CMD_ARGV, "combined") == 0)
tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"combination", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* trst_type (NOP without HAS_TRST) */
m = RESET_TRST_OPEN_DRAIN;
if (strcmp(*CMD_ARGV, "trst_open_drain") == 0)
tmp |= RESET_TRST_OPEN_DRAIN;
else if (strcmp(*CMD_ARGV, "trst_push_pull") == 0)
/* push/pull from adapter - default */;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"trst_type", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* srst_type (NOP without HAS_SRST) */
m |= RESET_SRST_PUSH_PULL;
if (strcmp(*CMD_ARGV, "srst_push_pull") == 0)
tmp |= RESET_SRST_PUSH_PULL;
else if (strcmp(*CMD_ARGV, "srst_open_drain") == 0)
/* open drain from adapter - default */;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"srst_type", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* caller provided nonsense; fail */
LOG_ERROR("unknown reset_config flag (%s)", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
next:
/* Remember the bits which were specified (mask)
* and their new values (new_cfg).
*/
mask |= m;
new_cfg |= tmp;
}
/* clear previous values of those bits, save new values */
if (mask) {
int old_cfg = jtag_get_reset_config();
old_cfg &= ~mask;
new_cfg |= old_cfg;
jtag_set_reset_config(new_cfg);
} else
new_cfg = jtag_get_reset_config();
/*
* Display the (now-)current reset mode
*/
char *modes[5];
/* minimal JTAG has neither SRST nor TRST (so that's the default) */
switch (new_cfg & (RESET_HAS_TRST | RESET_HAS_SRST)) {
case RESET_HAS_SRST:
modes[0] = "srst_only";
break;
case RESET_HAS_TRST:
modes[0] = "trst_only";
break;
case RESET_TRST_AND_SRST:
modes[0] = "trst_and_srst";
break;
default:
modes[0] = "none";
break;
}
/* normally SRST and TRST are decoupled; but bugs happen ... */
switch (new_cfg & (RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST)) {
case RESET_SRST_PULLS_TRST:
modes[1] = "srst_pulls_trst";
break;
case RESET_TRST_PULLS_SRST:
modes[1] = "trst_pulls_srst";
break;
case RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST:
modes[1] = "combined";
break;
default:
modes[1] = "separate";
break;
}
/* TRST-less connectors include Altera, Xilinx, and minimal JTAG */
if (new_cfg & RESET_HAS_TRST) {
if (new_cfg & RESET_TRST_OPEN_DRAIN)
modes[3] = " trst_open_drain";
else
modes[3] = " trst_push_pull";
} else
modes[3] = "";
/* SRST-less connectors include TI-14, Xilinx, and minimal JTAG */
if (new_cfg & RESET_HAS_SRST) {
if (new_cfg & RESET_SRST_NO_GATING)
modes[2] = " srst_nogate";
else
modes[2] = " srst_gates_jtag";
if (new_cfg & RESET_SRST_PUSH_PULL)
modes[4] = " srst_push_pull";
else
modes[4] = " srst_open_drain";
} else {
modes[2] = "";
modes[4] = "";
}
command_print(CMD_CTX, "%s %s%s%s%s",
modes[0], modes[1],
modes[2], modes[3], modes[4]);
return ERROR_OK;
}
COMMAND_HANDLER(handle_adapter_nsrst_delay_command)
{
if (CMD_ARGC > 1)
return ERROR_COMMAND_SYNTAX_ERROR;
if (CMD_ARGC == 1)
{
unsigned delay;
COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
jtag_set_nsrst_delay(delay);
}
command_print(CMD_CTX, "adapter_nsrst_delay: %u", jtag_get_nsrst_delay());
return ERROR_OK;
}
COMMAND_HANDLER(handle_adapter_khz_command)
{
if (CMD_ARGC > 1)
return ERROR_COMMAND_SYNTAX_ERROR;
int retval = ERROR_OK;
if (CMD_ARGC == 1)
{
unsigned khz = 0;
COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
retval = jtag_config_khz(khz);
if (ERROR_OK != retval)
return retval;
}
int cur_speed = jtag_get_speed_khz();
retval = jtag_get_speed_readable(&cur_speed);
if (ERROR_OK != retval)
return retval;
if (cur_speed)
command_print(CMD_CTX, "%d kHz", cur_speed);
else
command_print(CMD_CTX, "RCLK - adaptive");
return retval;
}
static const struct command_registration interface_command_handlers[] = {
{
.name = "adapter_khz",
.handler = handle_adapter_khz_command,
.mode = COMMAND_ANY,
.help = "With an argument, change to the specified maximum "
"jtag speed. For JTAG, 0 KHz signifies adaptive "
" clocking. "
"With or without argument, display current setting.",
.usage = "[khz]",
},
{
.name = "adapter_name",
.mode = COMMAND_ANY,
.jim_handler = jim_adapter_name,
.help = "Returns the name of the currently "
"selected adapter (driver)",
},
{
.name = "adapter_nsrst_delay",
.handler = handle_adapter_nsrst_delay_command,
.mode = COMMAND_ANY,
.help = "delay after deasserting SRST in ms",
.usage = "[milliseconds]",
},
{
.name = "interface",
.handler = handle_interface_command,
.mode = COMMAND_CONFIG,
.help = "Select a debug adapter interface (driver)",
.usage = "driver_name",
},
{
.name = "interface_list",
.handler = handle_interface_list_command,
.mode = COMMAND_ANY,
.help = "List all built-in debug adapter interfaces (drivers)",
},
{
.name = "reset_config",
.handler = handle_reset_config_command,
.mode = COMMAND_ANY,
.help = "configure adapter reset behavior",
.usage = "[none|trst_only|srst_only|trst_and_srst] "
"[srst_pulls_trst|trst_pulls_srst|combined|separate] "
"[srst_gates_jtag|srst_nogate] "
"[trst_push_pull|trst_open_drain] "
"[srst_push_pull|srst_open_drain]",
},
COMMAND_REGISTRATION_DONE
};
/**
* Register the commands which deal with arbitrary debug adapter drivers.
*
* @todo Remove internal assumptions that all debug adapters use JTAG for
* transport. Various types and data structures are not named generically.
*/
int interface_register_commands(struct command_context *ctx)
{
return register_commands(ctx, NULL, interface_command_handlers);
}

View File

@ -78,7 +78,7 @@ proc srst_asserted {} {
# BEGIN MIGRATION AIDS ... these adapter operations originally had
# JTAG-specific names despite the fact that the operations were not
# specific to JTAG.
# specific to JTAG, or otherewise had troublesome/misleading names.
#
# FIXME phase these aids out after about April 2011
#

View File

@ -40,6 +40,11 @@
#include <strings.h>
#endif
/**
* @file
* Holds support for accessing JTAG-specific mechanisms from TCl scripts.
*/
static const Jim_Nvp nvp_jtag_tap_event[] = {
{ .value = JTAG_TRST_ASSERTED, .name = "post-reset" },
{ .value = JTAG_TAP_EVENT_SETUP, .name = "setup" },
@ -671,24 +676,6 @@ static void jtag_tap_handle_event(struct jtag_tap *tap, enum jtag_event e)
}
}
static int
jim_jtag_interface(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
Jim_GetOptInfo goi;
Jim_GetOpt_Setup(&goi, interp, argc-1, argv + 1);
/* return the name of the interface */
/* TCL code might need to know the exact type... */
/* FUTURE: we allow this as a means to "set" the interface. */
if (goi.argc != 0) {
Jim_WrongNumArgs(goi.interp, 1, goi.argv-1, "(no params)");
return JIM_ERR;
}
const char *name = jtag_interface ? jtag_interface->name : NULL;
Jim_SetResultString(goi.interp, name ? : "undefined", -1);
return JIM_OK;
}
static int jim_jtag_arp_init(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
Jim_GetOptInfo goi;
@ -862,12 +849,6 @@ static const struct command_registration jtag_subcommand_handlers[] = {
.handler = handle_jtag_init_command,
.help = "initialize jtag scan chain",
},
{
.name = "interface",
.mode = COMMAND_ANY,
.jim_handler = jim_jtag_interface,
.help = "Returns the name of the currently selected interface.",
},
{
.name = "arp_init",
.mode = COMMAND_ANY,
@ -957,93 +938,6 @@ void jtag_notify_event(enum jtag_event event)
}
static int default_khz(int khz, int *jtag_speed)
{
LOG_ERROR("Translation from khz to jtag_speed not implemented");
return ERROR_FAIL;
}
static int default_speed_div(int speed, int *khz)
{
LOG_ERROR("Translation from jtag_speed to khz not implemented");
return ERROR_FAIL;
}
static int default_power_dropout(int *dropout)
{
*dropout = 0; /* by default we can't detect power dropout */
return ERROR_OK;
}
static int default_srst_asserted(int *srst_asserted)
{
*srst_asserted = 0; /* by default we can't detect srst asserted */
return ERROR_OK;
}
COMMAND_HANDLER(handle_interface_list_command)
{
if (strcmp(CMD_NAME, "interface_list") == 0 && CMD_ARGC > 0)
return ERROR_COMMAND_SYNTAX_ERROR;
command_print(CMD_CTX, "The following debug interfaces are available:");
for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
{
const char *name = jtag_interfaces[i]->name;
command_print(CMD_CTX, "%u: %s", i + 1, name);
}
return ERROR_OK;
}
COMMAND_HANDLER(handle_interface_command)
{
/* check whether the interface is already configured */
if (jtag_interface)
{
LOG_WARNING("Interface already configured, ignoring");
return ERROR_OK;
}
/* interface name is a mandatory argument */
if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
return ERROR_COMMAND_SYNTAX_ERROR;
for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
{
if (strcmp(CMD_ARGV[0], jtag_interfaces[i]->name) != 0)
continue;
if (NULL != jtag_interfaces[i]->commands)
{
int retval = register_commands(CMD_CTX, NULL,
jtag_interfaces[i]->commands);
if (ERROR_OK != retval)
return retval;
}
jtag_interface = jtag_interfaces[i];
if (jtag_interface->khz == NULL)
jtag_interface->khz = default_khz;
if (jtag_interface->speed_div == NULL)
jtag_interface->speed_div = default_speed_div;
if (jtag_interface->power_dropout == NULL)
jtag_interface->power_dropout = default_power_dropout;
if (jtag_interface->srst_asserted == NULL)
jtag_interface->srst_asserted = default_srst_asserted;
return ERROR_OK;
}
/* no valid interface was found (i.e. the configuration option,
* didn't match one of the compiled-in interfaces
*/
LOG_ERROR("The specified debug interface was not found (%s)", CMD_ARGV[0]);
CALL_COMMAND_HANDLER(handle_interface_list_command);
return ERROR_JTAG_INVALID_INTERFACE;
}
COMMAND_HANDLER(handle_scan_chain_command)
{
struct jtag_tap *tap;
@ -1096,217 +990,6 @@ COMMAND_HANDLER(handle_scan_chain_command)
return ERROR_OK;
}
COMMAND_HANDLER(handle_reset_config_command)
{
int new_cfg = 0;
int mask = 0;
/* Original versions cared about the order of these tokens:
* reset_config signals [combination [trst_type [srst_type]]]
* They also clobbered the previous configuration even on error.
*
* Here we don't care about the order, and only change values
* which have been explicitly specified.
*/
for (; CMD_ARGC; CMD_ARGC--, CMD_ARGV++) {
int tmp = 0;
int m;
/* gating */
m = RESET_SRST_NO_GATING;
if (strcmp(*CMD_ARGV, "srst_gates_jtag") == 0)
/* default: don't use JTAG while SRST asserted */;
else if (strcmp(*CMD_ARGV, "srst_nogate") == 0)
tmp = RESET_SRST_NO_GATING;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"gating", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* signals */
m = RESET_HAS_TRST | RESET_HAS_SRST;
if (strcmp(*CMD_ARGV, "none") == 0)
tmp = RESET_NONE;
else if (strcmp(*CMD_ARGV, "trst_only") == 0)
tmp = RESET_HAS_TRST;
else if (strcmp(*CMD_ARGV, "srst_only") == 0)
tmp = RESET_HAS_SRST;
else if (strcmp(*CMD_ARGV, "trst_and_srst") == 0)
tmp = RESET_HAS_TRST | RESET_HAS_SRST;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"signal", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* combination (options for broken wiring) */
m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
if (strcmp(*CMD_ARGV, "separate") == 0)
/* separate reset lines - default */;
else if (strcmp(*CMD_ARGV, "srst_pulls_trst") == 0)
tmp |= RESET_SRST_PULLS_TRST;
else if (strcmp(*CMD_ARGV, "trst_pulls_srst") == 0)
tmp |= RESET_TRST_PULLS_SRST;
else if (strcmp(*CMD_ARGV, "combined") == 0)
tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"combination", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* trst_type (NOP without HAS_TRST) */
m = RESET_TRST_OPEN_DRAIN;
if (strcmp(*CMD_ARGV, "trst_open_drain") == 0)
tmp |= RESET_TRST_OPEN_DRAIN;
else if (strcmp(*CMD_ARGV, "trst_push_pull") == 0)
/* push/pull from adapter - default */;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"trst_type", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* srst_type (NOP without HAS_SRST) */
m |= RESET_SRST_PUSH_PULL;
if (strcmp(*CMD_ARGV, "srst_push_pull") == 0)
tmp |= RESET_SRST_PUSH_PULL;
else if (strcmp(*CMD_ARGV, "srst_open_drain") == 0)
/* open drain from adapter - default */;
else
m = 0;
if (mask & m) {
LOG_ERROR("extra reset_config %s spec (%s)",
"srst_type", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
}
if (m)
goto next;
/* caller provided nonsense; fail */
LOG_ERROR("unknown reset_config flag (%s)", *CMD_ARGV);
return ERROR_INVALID_ARGUMENTS;
next:
/* Remember the bits which were specified (mask)
* and their new values (new_cfg).
*/
mask |= m;
new_cfg |= tmp;
}
/* clear previous values of those bits, save new values */
if (mask) {
int old_cfg = jtag_get_reset_config();
old_cfg &= ~mask;
new_cfg |= old_cfg;
jtag_set_reset_config(new_cfg);
} else
new_cfg = jtag_get_reset_config();
/*
* Display the (now-)current reset mode
*/
char *modes[5];
/* minimal JTAG has neither SRST nor TRST (so that's the default) */
switch (new_cfg & (RESET_HAS_TRST | RESET_HAS_SRST)) {
case RESET_HAS_SRST:
modes[0] = "srst_only";
break;
case RESET_HAS_TRST:
modes[0] = "trst_only";
break;
case RESET_TRST_AND_SRST:
modes[0] = "trst_and_srst";
break;
default:
modes[0] = "none";
break;
}
/* normally SRST and TRST are decoupled; but bugs happen ... */
switch (new_cfg & (RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST)) {
case RESET_SRST_PULLS_TRST:
modes[1] = "srst_pulls_trst";
break;
case RESET_TRST_PULLS_SRST:
modes[1] = "trst_pulls_srst";
break;
case RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST:
modes[1] = "combined";
break;
default:
modes[1] = "separate";
break;
}
/* TRST-less connectors include Altera, Xilinx, and minimal JTAG */
if (new_cfg & RESET_HAS_TRST) {
if (new_cfg & RESET_TRST_OPEN_DRAIN)
modes[3] = " trst_open_drain";
else
modes[3] = " trst_push_pull";
} else
modes[3] = "";
/* SRST-less connectors include TI-14, Xilinx, and minimal JTAG */
if (new_cfg & RESET_HAS_SRST) {
if (new_cfg & RESET_SRST_NO_GATING)
modes[2] = " srst_nogate";
else
modes[2] = " srst_gates_jtag";
if (new_cfg & RESET_SRST_PUSH_PULL)
modes[4] = " srst_push_pull";
else
modes[4] = " srst_open_drain";
} else {
modes[2] = "";
modes[4] = "";
}
command_print(CMD_CTX, "%s %s%s%s%s",
modes[0], modes[1],
modes[2], modes[3], modes[4]);
return ERROR_OK;
}
COMMAND_HANDLER(handle_adapter_nsrst_delay_command)
{
if (CMD_ARGC > 1)
return ERROR_COMMAND_SYNTAX_ERROR;
if (CMD_ARGC == 1)
{
unsigned delay;
COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
jtag_set_nsrst_delay(delay);
}
command_print(CMD_CTX, "adapter_nsrst_delay: %u", jtag_get_nsrst_delay());
return ERROR_OK;
}
COMMAND_HANDLER(handle_jtag_ntrst_delay_command)
{
if (CMD_ARGC > 1)
@ -1322,21 +1005,6 @@ COMMAND_HANDLER(handle_jtag_ntrst_delay_command)
return ERROR_OK;
}
COMMAND_HANDLER(handle_adapter_nsrst_assert_width_command)
{
if (CMD_ARGC > 1)
return ERROR_COMMAND_SYNTAX_ERROR;
if (CMD_ARGC == 1)
{
unsigned delay;
COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
jtag_set_nsrst_assert_width(delay);
}
command_print(CMD_CTX, "adapter_nsrst_assert_width: %u", jtag_get_nsrst_assert_width());
return ERROR_OK;
}
COMMAND_HANDLER(handle_jtag_ntrst_assert_width_command)
{
if (CMD_ARGC > 1)
@ -1352,35 +1020,6 @@ COMMAND_HANDLER(handle_jtag_ntrst_assert_width_command)
return ERROR_OK;
}
COMMAND_HANDLER(handle_adapter_khz_command)
{
if (CMD_ARGC > 1)
return ERROR_COMMAND_SYNTAX_ERROR;
int retval = ERROR_OK;
if (CMD_ARGC == 1)
{
unsigned khz = 0;
COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
retval = jtag_config_khz(khz);
if (ERROR_OK != retval)
return retval;
}
int cur_speed = jtag_get_speed_khz();
retval = jtag_get_speed_readable(&cur_speed);
if (ERROR_OK != retval)
return retval;
if (cur_speed)
command_print(CMD_CTX, "%d kHz", cur_speed);
else
command_print(CMD_CTX, "RCLK - adaptive");
return retval;
}
COMMAND_HANDLER(handle_jtag_rclk_command)
{
if (CMD_ARGC > 1)
@ -1608,69 +1247,6 @@ COMMAND_HANDLER(handle_tms_sequence_command)
return ERROR_OK;
}
static const struct command_registration interface_command_handlers[] = {
{
.name = "adapter_khz",
.handler = handle_adapter_khz_command,
.mode = COMMAND_ANY,
.help = "With an argument, change to the specified maximum "
"jtag speed. For JTAG, 0 KHz signifies adaptive "
" clocking. "
"With or without argument, display current setting.",
.usage = "[khz]",
},
{
.name = "adapter_nsrst_assert_width",
.handler = handle_adapter_nsrst_assert_width_command,
.mode = COMMAND_ANY,
.help = "delay after asserting SRST in ms",
.usage = "[milliseconds]",
},
{
.name = "adapter_nsrst_delay",
.handler = handle_adapter_nsrst_delay_command,
.mode = COMMAND_ANY,
.help = "delay after deasserting SRST in ms",
.usage = "[milliseconds]",
},
{
.name = "interface",
.handler = handle_interface_command,
.mode = COMMAND_CONFIG,
.help = "Select a debug adapter interface (driver)",
.usage = "driver_name",
},
{
.name = "interface_list",
.handler = handle_interface_list_command,
.mode = COMMAND_ANY,
.help = "List all built-in debug adapter interfaces (drivers)",
},
{
.name = "reset_config",
.handler = handle_reset_config_command,
.mode = COMMAND_ANY,
.help = "configure adapter reset behavior",
.usage = "[none|trst_only|srst_only|trst_and_srst] "
"[srst_pulls_trst|trst_pulls_srst|combined|separate] "
"[srst_gates_jtag|srst_nogate] "
"[trst_push_pull|trst_open_drain] "
"[srst_push_pull|srst_open_drain]",
},
COMMAND_REGISTRATION_DONE
};
/**
* Register the commands which deal with arbitrary debug adapter drivers.
*
* @todo Remove internal assumptions that all debug adapters use JTAG for
* transport. Various types and data structures are not named generically.
*/
int interface_register_commands(struct command_context *ctx)
{
return register_commands(ctx, NULL, interface_command_handlers);
}
static const struct command_registration jtag_command_handlers[] = {
{
.name = "jtag_rclk",