imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

tcl/board: Add Raspberry Pi 3 board 

OpenOCD cannot connect to BCM2837's JTAG interface on RPi 3 board until
the reset configuration mode is set as trst_only.

According to Table 6-31 GPIO Pins Alternative Function Assignment of
Broadcom's BCM2837 ARM Peripherials datasheet [1] and Raspberry Pi's
GPIO control in config.txt document [2], only Test Reset (TRST) pin (no
System Reset, SRST) is exposed.

[1] https://usermanual.wiki/Datasheet/BCM2837ARMPeripheralsBroadcom.1054296467/view
[2] https://www.raspberrypi.org/documentation/configuration/config-txt/gpio.md

Change-Id: I26ff3924039ff7943faf0a5b1ad0427c8dbb88f2
Link: http://openocd.zylin.com/#/c/6364/1
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Reviewed-on: http://openocd.zylin.com/6366
Tested-by: jenkins
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is contained in:
Jian-Hong Pan 2021-07-11 12:04:06 +08:00 committed by Antonio Borneo
parent db16b3dc5b
commit f5aa2e11cd
1 changed files with 13 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
tcl/board/rpi3.cfg Normal file
View File

@ -0,0 +1,13 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# This is the Raspberry Pi 3 board with BCM2837 chip
# https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837/README.md
#
# Enable JTAG GPIO on Raspberry Pi boards
# https://www.raspberrypi.org/documentation/configuration/config-txt/gpio.md
source [find target/bcm2837.cfg]
transport select jtag
# Raspberry Pi boards only expose Test Reset (TRST) pin, no System Reset (SRST)
reset_config trst_only