imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mww_phys retired. Replaced by generic mww phys in target.c

This commit is contained in:
Øyvind Harboe 2009-10-21 20:19:47 +02:00
parent e996452089
commit fcf1301e52
6 changed files with 44 additions and 95 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
doc/openocd.texi
View File

@ -5431,23 +5431,6 @@ Display cp15 register @var{regnum};
else if a @var{value} is provided, that value is written to that register.
@end deffn
@deffn Command {arm720t mdw_phys} addr [count]
@deffnx Command {arm720t mdh_phys} addr [count]
@deffnx Command {arm720t mdb_phys} addr [count]
Display contents of physical address @var{addr}, as
32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}),
or 8-bit bytes (@command{mdb_phys}).
If @var{count} is specified, displays that many units.
@end deffn
@deffn Command {arm720t mww_phys} addr word
@deffnx Command {arm720t mwh_phys} addr halfword
@deffnx Command {arm720t mwb_phys} addr byte
Writes the specified @var{word} (32 bits),
@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
at the specified physical address @var{addr}.
@end deffn
@subsection ARM9 specific commands
@cindex ARM9
@ -5508,23 +5491,6 @@ Else if that value is written using the specified @var{address},
or using zero if no other address is not provided.
@end deffn
@deffn Command {arm920t mdw_phys} addr [count]
@deffnx Command {arm920t mdh_phys} addr [count]
@deffnx Command {arm920t mdb_phys} addr [count]
Display contents of physical address @var{addr}, as
32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}),
or 8-bit bytes (@command{mdb_phys}).
If @var{count} is specified, displays that many units.
@end deffn
@deffn Command {arm920t mww_phys} addr word
@deffnx Command {arm920t mwh_phys} addr halfword
@deffnx Command {arm920t mwb_phys} addr byte
Writes the specified @var{word} (32 bits),
@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
at the specified physical address @var{addr}.
@end deffn
@deffn Command {arm920t read_cache} filename
Dump the content of ICache and DCache to a file named @file{filename}.
@end deffn
@ -5556,23 +5522,6 @@ If a @var{value} is provided, that value is written to that register.
Else that register is read and displayed.
@end deffn
@deffn Command {arm926ejs mdw_phys} addr [count]
@deffnx Command {arm926ejs mdh_phys} addr [count]
@deffnx Command {arm926ejs mdb_phys} addr [count]
Display contents of physical address @var{addr}, as
32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}),
or 8-bit bytes (@command{mdb_phys}).
If @var{count} is specified, displays that many units.
@end deffn
@deffn Command {arm926ejs mww_phys} addr word
@deffnx Command {arm926ejs mwh_phys} addr halfword
@deffnx Command {arm926ejs mwb_phys} addr byte
Writes the specified @var{word} (32 bits),
@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
at the specified physical address @var{addr}.
@end deffn
@subsection ARM966E specific commands
@cindex ARM966E

2
tcl/board/atmel_at91sam9260-ek.cfg
View File

@ -24,7 +24,7 @@ $_TARGETNAME configure -event reset-start {
jtag_rclk 5
halt
# RSTC_MR : enable user reset, MMU may be enabled... use physical address
arm926ejs mww_phys 0xfffffd08 0xa5000501
arm926ejs mww phys 0xfffffd08 0xa5000501
}
$_TARGETNAME configure -event reset-init {

60
tcl/board/mini2440.cfg
View File

@ -177,10 +177,10 @@ proc init_2440 { } {
# usb clock are off 12mHz xtal
#-----------------------------------------------
arm920t mww_phys 0x4C000014 0x00000005 # Clock Divider control Reg
arm920t mww_phys 0x4C000000 0xFFFFFFFF # LOCKTIME count register
arm920t mww_phys 0x4C000008 0x00038022 # UPPLCON USB clock config Reg
arm920t mww_phys 0x4C000004 0x0007F021 # MPPLCON Proc clock config Reg
arm920t mww phys 0x4C000014 0x00000005 # Clock Divider control Reg
arm920t mww phys 0x4C000000 0xFFFFFFFF # LOCKTIME count register
arm920t mww phys 0x4C000008 0x00038022 # UPPLCON USB clock config Reg
arm920t mww phys 0x4C000004 0x0007F021 # MPPLCON Proc clock config Reg
#-----------------------------------------------
# Configure Memory controller
@ -188,45 +188,45 @@ proc init_2440 { } {
# DRAM - 64MB - 32 bit bus, uses BANKCON6 BANKCON7
#-----------------------------------------------
arm920t mww_phys 0x48000000 0x22111112 # BWSCON - Bank and Bus Width
arm920t mww_phys 0x48000010 0x00001112 # BANKCON4 - ?
arm920t mww_phys 0x4800001c 0x00018009 # BANKCON6 - DRAM
arm920t mww_phys 0x48000020 0x00018009 # BANKCON7 - DRAM
arm920t mww_phys 0x48000024 0x008E04EB # REFRESH - DRAM
arm920t mww_phys 0x48000028 0x000000B2 # BANKSIZE - DRAM
arm920t mww_phys 0x4800002C 0x00000030 # MRSRB6 - DRAM
arm920t mww_phys 0x48000030 0x00000030 # MRSRB7 - DRAM
arm920t mww phys 0x48000000 0x22111112 # BWSCON - Bank and Bus Width
arm920t mww phys 0x48000010 0x00001112 # BANKCON4 - ?
arm920t mww phys 0x4800001c 0x00018009 # BANKCON6 - DRAM
arm920t mww phys 0x48000020 0x00018009 # BANKCON7 - DRAM
arm920t mww phys 0x48000024 0x008E04EB # REFRESH - DRAM
arm920t mww phys 0x48000028 0x000000B2 # BANKSIZE - DRAM
arm920t mww phys 0x4800002C 0x00000030 # MRSRB6 - DRAM
arm920t mww phys 0x48000030 0x00000030 # MRSRB7 - DRAM
#-----------------------------------------------
# Now port configuration for enables for memory
# and other stuff.
#-----------------------------------------------
arm920t mww_phys 0x56000000 0x007FFFFF # GPACON
arm920t mww phys 0x56000000 0x007FFFFF # GPACON
arm920t mww_phys 0x56000010 0x00295559 # GPBCON
arm920t mww_phys 0x56000018 0x000003FF # GPBUP (PULLUP ENABLE)
arm920t mww_phys 0x56000014 0x000007C2 # GPBDAT
arm920t mww phys 0x56000010 0x00295559 # GPBCON
arm920t mww phys 0x56000018 0x000003FF # GPBUP (PULLUP ENABLE)
arm920t mww phys 0x56000014 0x000007C2 # GPBDAT
arm920t mww_phys 0x56000020 0xAAAAA6AA # GPCCON
arm920t mww_phys 0x56000028 0x0000FFFF # GPCUP
arm920t mww_phys 0x56000024 0x00000020 # GPCDAT
arm920t mww phys 0x56000020 0xAAAAA6AA # GPCCON
arm920t mww phys 0x56000028 0x0000FFFF # GPCUP
arm920t mww phys 0x56000024 0x00000020 # GPCDAT
arm920t mww_phys 0x56000030 0xAAAAAAAA # GPDCON
arm920t mww_phys 0x56000038 0x0000FFFF # GPDUP
arm920t mww phys 0x56000030 0xAAAAAAAA # GPDCON
arm920t mww phys 0x56000038 0x0000FFFF # GPDUP
arm920t mww_phys 0x56000040 0xAAAAAAAA # GPECON
arm920t mww_phys 0x56000048 0x0000FFFF # GPEUP
arm920t mww phys 0x56000040 0xAAAAAAAA # GPECON
arm920t mww phys 0x56000048 0x0000FFFF # GPEUP
arm920t mww_phys 0x56000050 0x00001555 # GPFCON
arm920t mww_phys 0x56000058 0x0000007F # GPFUP
arm920t mww_phys 0x56000054 0x00000000 # GPFDAT
arm920t mww phys 0x56000050 0x00001555 # GPFCON
arm920t mww phys 0x56000058 0x0000007F # GPFUP
arm920t mww phys 0x56000054 0x00000000 # GPFDAT
arm920t mww_phys 0x56000060 0x00150114 # GPGCON
arm920t mww_phys 0x56000068 0x0000007F # GPGUP
arm920t mww phys 0x56000060 0x00150114 # GPGCON
arm920t mww phys 0x56000068 0x0000007F # GPGUP
arm920t mww_phys 0x56000070 0x0015AAAA # GPHCON
arm920t mww_phys 0x56000078 0x000003FF # GPGUP
arm920t mww phys 0x56000070 0x0015AAAA # GPHCON
arm920t mww phys 0x56000078 0x000003FF # GPGUP
}

2
tcl/board/olimex_sam9_l9260.cfg
View File

@ -26,7 +26,7 @@ $_TARGETNAME configure -event reset-start {
# RSTC_MR : enable user reset, reset length is 64 slow clock cycles. MMU may
# be enabled... use physical address.
arm926ejs mww_phys 0xfffffd08 0xa5000501
arm926ejs mww phys 0xfffffd08 0xa5000501
}
$_TARGETNAME configure -event reset-init {

2
tcl/board/unknown_at91sam9260.cfg
View File

@ -18,7 +18,7 @@ $_TARGETNAME configure -event reset-start {
jtag_rclk 3
halt
# RSTC_MR : enable user reset, MMU may be enabled... use physical address
arm926ejs mww_phys 0xfffffd08 0xa5000501
arm926ejs mww phys 0xfffffd08 0xa5000501
}

22
tcl/target/davinci.cfg
View File

@ -204,34 +204,34 @@ proc davinci_wdog_reset {} {
#
# EMUMGT_CLKSPEED: write FREE bit to run despite emulation halt
arm926ejs mww_phys [expr $timer2_phys + 0x28] 0x00004000
arm926ejs mww phys [expr $timer2_phys + 0x28] 0x00004000
#
# Part II -- in case watchdog hasn't been set up
#
# TCR: disable, force internal clock source
arm926ejs mww_phys [expr $timer2_phys + 0x20] 0
arm926ejs mww phys [expr $timer2_phys + 0x20] 0
# TGCR: reset, force to 64-bit wdog mode, un-reset ("initial" state)
arm926ejs mww_phys [expr $timer2_phys + 0x24] 0
arm926ejs mww_phys [expr $timer2_phys + 0x24] 0x110b
arm926ejs mww phys [expr $timer2_phys + 0x24] 0
arm926ejs mww phys [expr $timer2_phys + 0x24] 0x110b
# clear counter (TIM12, TIM34) and period (PRD12, PRD34) registers
# so watchdog triggers ASAP
arm926ejs mww_phys [expr $timer2_phys + 0x10] 0
arm926ejs mww_phys [expr $timer2_phys + 0x14] 0
arm926ejs mww_phys [expr $timer2_phys + 0x18] 0
arm926ejs mww_phys [expr $timer2_phys + 0x1c] 0
arm926ejs mww phys [expr $timer2_phys + 0x10] 0
arm926ejs mww phys [expr $timer2_phys + 0x14] 0
arm926ejs mww phys [expr $timer2_phys + 0x18] 0
arm926ejs mww phys [expr $timer2_phys + 0x1c] 0
# WDTCR: put into pre-active state, then active
arm926ejs mww_phys [expr $timer2_phys + 0x28] 0xa5c64000
arm926ejs mww_phys [expr $timer2_phys + 0x28] 0xda7e4000
arm926ejs mww phys [expr $timer2_phys + 0x28] 0xa5c64000
arm926ejs mww phys [expr $timer2_phys + 0x28] 0xda7e4000
#
# Part III -- it's ready to rumble
#
# WDTCR: write invalid WDKEY to trigger reset
arm926ejs mww_phys [expr $timer2_phys + 0x28] 0x00004000
arm926ejs mww phys [expr $timer2_phys + 0x28] 0x00004000
}