Commit Graph

6 Commits

Author SHA1 Message Date
Antonio Borneo 4157732bd8 tcl/board: add SPDX tag
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
	fgrep -rL SPDX tcl/board | while read a;do \
	sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
	}' $a;done

With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.

Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7028
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2022-06-24 21:53:49 +00:00
Paul Fertser 31c58c139d jtag: drivers: stlink: handle all versions with single config
Extend HLA interface to allow multiple VID/PID pairs and use it to
autodetect the connected stlink version.

Change-Id: I35cd895b2260e23cf0e8fcb1fc11a78c2b99c69b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3961
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-12-12 21:13:55 +00:00
Uwe Bonnes 66d29eb6e3 tcl/target/stm32f4x.cfg: Use Workareasize of smallest possible device.
Increase workareasize when it is know we have a larger device.

Change-Id: Ieaee92e7cd25cc201989f14de122349698871412
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3378
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-13 23:34:29 +01:00
Paul Fertser a1bbf4b75b cfg: add srst_nogate to the supported targets, remove from board configs
It depends on the particular target whether it can work with SRST
asserted or not, so this belongs to the target config rather than the
board config.

Also, this allows for simple

openocd -f myboard.cfg -c "reset_config connect_assert_srst"

command to be used whenever a user feels a need to connect to an
unresponsive target.

Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2459
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26 20:54:51 +00:00
Paul Fertser c7384117c6 Allow transports to override the selected target (hla configs unification)
This should allow to share common configs for both regular access and
high-level adapters.

Use the newly-added functionality in stlink and icdi drivers, amend
the configs accordingly.

Runtime-tested with a TI tm4c123g board.

Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[gus@projectgus.com: context-specific deprecation warnings]
Signed-off-by: Angus Gratton <gus@projectgus.com>
[andrew.smirnov@gmail.com: additional nrf51.cfg mods]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1664
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11 21:25:56 +00:00
Spencer Oliver 8994b075fc cfg: add STM32F429 discovery board config
Change-Id: I4ee7a8185a02fac9d1f6079ab34d6a9f7047193a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1691
Tested-by: jenkins
2013-10-15 20:42:00 +00:00