Commit Graph

437 Commits

Author SHA1 Message Date
Spencer Oliver 36cc893086 docs: remove berlios related info
Change-Id: I9593eb165fce51411f20fa068e324b3fd882cdb3
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/190
Tested-by: jenkins
2011-11-10 15:41:59 +00:00
Uwe Hermann 498662e2e5 Add an interface file for DLP Design DLP-USB1232H.
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H
chip. Among other things, it can used as JTAG programmer if connected to
the JTAG target properly. I have successfully wired the module to an
Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD.

The setup details and schematics are documented at:
http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter

Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/20
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-13 22:29:28 +00:00
Spencer Oliver 24f82100f8 docs: update more url's
Change-Id: I476078f32910579fed55777c3b0e6da3ef3363b7
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-10-12 12:25:59 +01:00
Spencer Oliver ca0cc39f5f docs: update project url's
Change-Id: I54fc3aff722ed25143aad85e58d19b72fcecbba0
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-10-12 09:32:59 +01:00
Spencer Oliver cf692abe83 replace berlios url's with sourceforge url's
Change-Id: I1c9957bb64df87cee7c5e832f21453eb8934a5fb
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-10-11 17:18:05 +01:00
Richard Uhler 1411ad11c1 Implementation of a new jtag remote_bitbang driver.
The driver sends ascii encoded bitbang commands over unix sockets or TCP to
another process. This driver is useful for debugging software running on
processors which are being simulated.
2011-09-02 16:50:01 +02:00
Jie Zhang 738b91ddb4 remove useless pxref to SMP subsection 2011-08-11 22:13:32 +02:00
Spencer Oliver 633b1a2b49 docs: remove obsolete luminary target info
The lm3s variant is not required as this is handled in the
target script - see tcl/target/stellaris.cfg.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-28 16:06:24 +01:00
Spencer Oliver c73342fbe7 docs: update to use new stm32 driver names
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-28 11:44:48 +01:00
Spencer Oliver 1cfd3fdda9 doc: add Fujitsu FM3 flash driver info
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-27 10:28:24 +01:00
Jie Zhang ba4b8af4d7 remove doc on the deprecated '-p' option
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-26 21:24:08 +01:00
Jie Zhang 577c3bc087 Update doc about Jim since it's not a single .C file and a single .H file any more
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-26 21:23:20 +01:00
Peter Horn d4cd6f0320 cortex_m3: add auto maskisr
This patch extends the cortex_m3 maskisr command by a new option 'auto'.
The 'auto' option handles interrupts during stepping in a way they are
processed but don't disturb the program flow during debugging.

Before one had to choose to either enable or disable interrupts. The former
steps into interrupt handlers when they trigger. This disturbs the flow during
debugging, making it hard to follow some piece of code when interrupts occur
often.

When interrupts are disabled, the flow isn't disturbed but code relying on
interrupt handlers to be processed will stop working. For example a delay
function counting the number of timer interrupts will never complete, RTOS
task switching will not occur and output I/O queues of interrupt driven
I/O will stall or overflow.

Using the 'maskisr' command also typically requires gdb hooks to be supplied
by the user to switch interrupts off during the step and to enable them again
afterward.

The new 'auto' option of the 'maskisr' command solves the above problems. When
set, the step command allows pending interrupt handlers to be executed before
the step, then the step is taken with interrupts disabled and finally interrupts
are enabled again. This way interrupt processing stays in the background without
disturbing the flow of debugging. No gdb hooks are required. The 'auto'
option is the default, since it's believed that handling interrupts in this
way is suitable for most users.

The principle used for interrupt handling could probably be used for other
targets too.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-04 11:31:52 +01:00
Spencer Oliver 89fa8ce2d8 Revert "cortex_m3: add auto maskisr"
This reverts commit ff640f197a.

Original patch reverted as Author's name was incorrectly set.
2011-07-04 11:31:52 +01:00
Spencer Oliver ff640f197a cortex_m3: add auto maskisr
This patch extends the cortex_m3 maskisr command by a new option 'auto'.
The 'auto' option handles interrupts during stepping in a way they are
processed but don't disturb the program flow during debugging.

Before one had to choose to either enable or disable interrupts. The former
steps into interrupt handlers when they trigger. This disturbs the flow during
debugging, making it hard to follow some piece of code when interrupts occur
often.

When interrupts are disabled, the flow isn't disturbed but code relying on
interrupt handlers to be processed will stop working. For example a delay
function counting the number of timer interrupts will never complete, RTOS
task switching will not occur and output I/O queues of interrupt driven
I/O will stall or overflow.

Using the 'maskisr' command also typically requires gdb hooks to be supplied
by the user to switch interrupts off during the step and to enable them again
afterward.

The new 'auto' option of the 'maskisr' command solves the above problems. When
set, the step command allows pending interrupt handlers to be executed before
the step, then the step is taken with interrupts disabled and finally interrupts
are enabled again. This way interrupt processing stays in the background without
disturbing the flow of debugging. No gdb hooks are required. The 'auto'
option is the default, since it's believed that handling interrupts in this
way is suitable for most users.

The principle used for interrupt handling could probably be used for other
targets too.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-28 14:16:48 +01:00
Spencer Oliver 16cbe1216a build: add missing files to make dist
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-17 12:21:01 +01:00
Michel Jaouen 53c0fb6ef5 cortex a : smp doc update 2011-05-09 21:50:44 +02:00
Phil 364cfaac1d Added s19 to (fast_)load_image documentation to match the online help. 2011-04-01 09:02:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD 8e85bb4eea jlink: add Emulator configuration support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13 14:55:20 +01:00
Jean-Christophe PLAGNIOL-VILLARD 952de89bfe jlink: add capability dumper and command
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13 14:54:32 +01:00
Jean-Christophe PLAGNIOL-VILLARD 0eed61b7c4 jlink: add jlink_pid to specify the pid to use
this will allow us to use multiple jlink at the same time as when
the USB-Address is specified the PID change from 0x0101 to
(0x101 + usb_adress)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02 19:04:16 +01:00
Jean-Christophe PLAGNIOL-VILLARD b992dd58f1 jlink: switch commands to subcommands
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02 19:04:00 +01:00
Aaron Carroll 827053c79d openocd.texi: minor fixes in Reset Configuration
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31 08:46:16 +01:00
David Brownell 7cd2617384 initial SWD transport (SWD infrastructure #2)
This piggy backs on JTAG so it's not yet pretty, but that
seems unavoidable so far given today's OpenOCD internals.

SWD init and data transfer  are unfinished and untested, but
that should cause no regressions, and will be addressed by
the time drivers start using this infrastructure.  Checking
in whould get the code working better sooner, and turn up any
structural/architectural issues while they're easier to fix.

The debug adapter drivers will provide simple SWD driver
structs with methods that kick in as needed (instead of JTAG).
So far just one adapter driver has been updated (not yet
ready to use or circulate).

The biggest issues are probably
  - fault handling, where the ARM Debug Interface V5 pipelining
    needs work in both JTAG and SWD modes and
  - missing  rewrite of block I/O code to work on both of our
Cortex-ready transports (Current code is  hard-wired to JTAG);
relates also to the pipelining issue.
  - omitted support to activate/deactivate SWO/SWV trace (this is
    technically trivial, but configuring what to trace is NOT.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
----

 doc/openocd.texi        |   17 ++
 src/jtag/core.c         |    3
 src/jtag/interface.h    |    4
 src/jtag/jtag.h         |    2
 src/jtag/swd.h          |  114 +++++++++++++++++++
 src/jtag/tcl.c          |    2
 src/target/adi_v5_swd.c |  281 ++++++++++++++++++++++++++++++++++++++++++++++--
 src/target/arm_adi_v5.c |    8 +
 src/target/arm_adi_v5.h |    3
 9 files changed, 425 insertions(+), 9 deletions(-)
2010-12-24 18:50:41 -08:00
Øyvind Harboe af3f77a177 openocd doc: update the comments about Jim Tcl a bit
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-16 09:12:46 +01:00
Antonio Borneo 42082f7c23 FLASH/NOR: rename from spearsmi to stmsmi
STMicroelectronics controller SMI is not SPEAr specific.
Rename it and change name to every symbol in the code.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-23 08:37:34 +01:00
Antonio Borneo 06b4903e3e Documentation: fix typo
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-23 08:32:43 +01:00
Antonio Borneo e7a8de1762 NOR/SPEAr: Add support for Serial NOR
Add support and documentation for STMicroelectronics
SPEAr Serial Memory Interface (SMI).
Code tested on SPEAr3xx only.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-16 09:16:11 +01:00
Øyvind Harboe fdae51287c httpd: retire this server
this never panned out and there are enough mistakes in
the code that probably nobody used this.

Use the tcl server and implement a standalone http
app instead works fine.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-11-15 09:18:21 +01:00
Antonio Borneo 4747af362d JIM: document "echo" command
Document "-n" option in manual;
Modify "echo" command definition as COMMAND_HANDLER to
easily add help message
Add help message aligned with manual.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-09 08:12:51 +01:00
Øyvind Harboe 96a56ba086 pipes: add documentation for pipes
Stick with the name "gdb_port" even if this command
can be used for other things(disable, named pipes,
anonymous stdin/out pipe). "port" is correct for
probably more than 90% of use cases, if not more.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-01 10:26:10 +02:00
Øyvind Harboe 50d5441e2a server: add support for pipes
-p/--pipe is now deprecated. Use '-c "gdb_port pipe;log_output openocd.log"'
instead. Warning logged.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-01 10:26:08 +02:00
Mike Dunn 103c1f9525 xscale: some wp detail added to user manual
Hi everyone (again),

Watchpoints on xscale are quirky, so I thought a little explanation in the
user's manual was warranted.

Comments gratefully received.

Last one, Øyvind :-)

Thanks,
Mike

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
2010-09-20 09:21:13 +02:00
Spencer Oliver 3c69eee9ef cortex m3: add cortex_m3 reset_config cmd
This new cmd adds the ability to choose the Cortex-M3
reset method used.
It defaults to using SRST for reset if available otherwise
it falls back to using NVIC VECTRESET. This is known to work
on all cores.

Move any luminary specific reset handling to the stellaris cfg file.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-31 20:09:26 +01:00
Catalin Patulea 36333f9ca8 Fix typo in documentation of usb_blaster_vid_pid command 2010-08-13 23:34:58 +02:00
Øyvind Harboe 8f779cf66b tcl: remove silly ocd_ prefix to array2mem and mem2array
ocd_ prefix is used internally in OpenOCD as a kludge more
or less to deal with the two kinds of commands that OpenOCD
has.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-11 17:24:55 +02:00
Mike Dunn 7682877c8c xscale documentation: vector table handling
Hi everyone.  I noticed some incorrect information in the user manual
regarding how the vector table is handled on the xscale, so for your
consideration, here's a short patch that corrects it, and adds a
little more detail I thought might be helpful.

The documentation states that OpenOCD does not attempt to synchronize
the vector tables in memory with those stored in the "mini instruction
cache".  In fact, on each resume it does copy from memory to the cache
all entries in the high and low tables that were not previously
defined using the 'xscale vector_table' command. (In
src/target/xscale.c, see xscale_update_vectors(), which is invoked by
xscale_resume().)  I take advantage of this during Linux boot-up.  The
extra detail describes in general terms how I do this.

Corrections, comments are of course gratefully received.

Thanks,
Mike

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
2010-08-02 22:39:48 +02:00
David Brownell a463670c31 "transport select" returns Jim value
Make it scriptable, so code can be conditionalized based on
what transport is in use for the session.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-07-24 14:38:46 -04:00
Spencer Oliver 450aaad1e9 docs: removed unused cmd 'fast'
The cmd fast was removed in commit c0d14dc7f1

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-20 10:46:54 +01:00
Spencer Oliver d249057adf docs: missing parameter from nand check_bad_blocks
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-19 09:10:52 +01:00
Spencer Oliver dc4df8bb97 docs: fix transport typo
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-12 19:36:19 +01:00
David Brownell db8b99aed6 Fix minor openocd.texi bug
::X
Signed-off-by: David Brownell <db@helium.(none)>
2010-07-02 17:14:52 -04:00
David Brownell 93f2afa45f initial "transport" framework
This adds the guts of a transport framework with initialization,
which should work with current JTAG-only configurations (tested
with FT2232).

Each debug adapter can declare the transports it supports, and
exactly one transport is initialized.  (with its commands) in
any given OpenOCD session.

  * Define a new "struct transport with init hooks and a few
 "transport"  subcommands to support it:

     "list" ... list the transports configured (just "jtag" for now)
     "select" ... makes the debug session use that transport
     "init" ... initializes the selected transport (internal)

  * "interface_transports" ... declares transports the current interface
    can support.  (Some will do this from C code instead, when there are
    no hardware versioning (or other) issues to prevent it.

Plus some FT2232 tweaks, including a few to streamline upcoming
support for an SWD transport (initially for Luminary adapters).

Eventually src/jtag should probably become src/transport, moving
jtag-specific stuff  to transport/jtag.

Signed-off-by: David Brownell <db@helium.(none)>
2010-07-02 16:45:28 -04:00
Spencer Oliver 5319ccd7eb flash: add virtual flash bank driver
This adds a virtual flash bank driver that allows virtual banks to
be defined that refer to an existing flash bank.

For example the real address for bank0 on the pic32 is 0x1fc00000
but the user program will either be in kseg0 (0xbfc00000) or
kseg1 (0x9fc00000).
This also means that gdb will be aware of all the read only flash
addresses.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-26 11:10:15 +01:00
Jun Ma b8c54b362b comments on doc/manual/primer/jtag.txt
1. fix some errors in jtag.txt(in my personal opinion, please review).
2. remove a broken link

Signed-off-by: Jun Ma <sync.jma@gmail.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-15 10:07:55 +02:00
Marc Pignat 4e022886d6 Documentation: consistency in GDB command name
Always use the complete name of the GDB command, not an abbreviation.
2010-05-11 20:01:18 +02:00
Marc Pignat 4cf13101e5 Documentation : arm920t implements armv4
There is a small typo in the cpu list, arm920t is armv4.
2010-05-11 20:01:18 +02:00
Øyvind Harboe 737c9b6258 flash: stop caching protection state
There are a million reasons why cached protection state might
be stale: power cycling of target, reset, code executing on
the target, etc.

The "flash protect_check" command is now gone. This is *always*
executed when running a "flash info".

As a bonus for more a more robust approach, lots of code could
be deleted.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-05 15:24:25 +02:00
Øyvind Harboe f7e0f3c285 flash: erase_address now has an unlock option
Quite useful to be able to unlock the flash, just like in
the flash write_image cmd.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-05 15:24:25 +02:00
Marc Pignat ca0f6a5c58 documentation typo
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-05 11:10:12 +02:00