Commit Graph

53 Commits

Author SHA1 Message Date
David Brownell 1c5c57ec8e src/flash/nor: usage/help/doc updates
Make "usage" messages use the same EBNF as the User's Guide;
no angle brackets.  Improve and correct various helptexts.

Don't use "&function"; a function's name is its address.
Remove a couple instances of pointless whitespace; shrink a
few overlong lines; fix some bad indents.

Add TODO list entry re full support for NAND/NOR bank names.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-09 10:25:03 -08:00
David Brownell 296a011db5 NOR: add FIXMEs for writing ones
It can invalidate ECC codes, and in general is not guaranteed
to work.  (However on some chips it _appears_ to behave.)  Just
don't do it; don't write in those cases.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-08 16:47:58 -08:00
Antonio Borneo 7c5acf8660 whitespace cleanup, mostly for docs
Remove useless space/tab at end of lines.
Remove spaces in indentation and replace with tab.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-30 11:51:29 -08:00
Uwe Hermann cfc02ccca2 fix typos in documentation
Fixes some minor typos in the top-level documentation files.

Signed-off-by: Zachary T Welch <zw@superlucidity.net>
2009-11-26 10:12:22 -08:00
David Brownell bf3abc48f0 ARM11: use standard single step simulation
The previous stuff was needed because the ARM11 code wasn't using
the standard ARM base type and register access ... but now those
mechanisms work, so we can switch out that special-purpose glue.

This should resolve all the "FIXME -- handle Thumb single stepping"
comments too, and properly handle the processor's mode.  (Modulo
the issue that this code doesn't yet handle two-byte breakpoints.)

Clarify the comments about the the hardware single stepping.  When
we eventually share breakpoint code with Cortex-A8, we can just make
that be the default on cores which support it.  We may still want an
override command, not just to facilitate testing but to cope with
"instruction address mismatch" not quite being true single-step.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-24 01:27:21 -08:00
Øyvind Harboe 5985dee35d arm11: do not use dynamic arrays
Allocate working memory dynamically, caught by checkstack.pl

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-22 19:57:57 +01:00
David Brownell dc22fd899e TODO: ref 'checkstack.pl' not 'checkpatch.pl'
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-22 10:28:19 -08:00
Øyvind Harboe 7daec5a0ce todo: add tip on how to identify excessive stack usage
Use dynamic allocations for working memory rather than stack.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-22 18:50:57 +01:00
Øyvind Harboe 4441c1ffdc ARM11: added mrc/mcr support to arm11 code.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-05 23:57:49 +01:00
Øyvind Harboe cca7cf1e74 TODO: Wrote up list of remaining tasks for target->type->mrc/mcr
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-05 23:56:37 +01:00
Øyvind Harboe 8b30f22dec Idea for adding watchpoint masks. 2009-10-26 09:12:11 +01:00
David Brownell 6cb1d10cda JTAG: simple autoprobing
This patch adds basic autoprobing support for the JTAG scan chains
which cooperate.  To use, you can invoke OpenOCD with just:

 - interface spec: "-f interface/...cfg"
 - possibly with "-c 'reset_config ...'" for SRST/TRST
 - possibly with "-c 'jtag_khz ...'" for the JTAG clock

Then set up config files matching the reported TAPs.  It doesn't
declare targets ... just TAPs.  So facilities above the JTAG and
SVF/XSVF levels won't be available without a real config; this is
almost purely a way to generate diagnostics.

Autoprobe was successful with most boards I tested, except ones
incorporating C55x DSPs (which don't cooperate with this scheme
for IR length autodetection).  Here's what one multi-TAP chip
reported, with the "Warn:" prefixes removed:

 clock speed 500 kHz
 There are no enabled taps.  AUTO PROBING MIGHT NOT WORK!!
 AUTO auto0.tap - use "jtag newtap auto0 tap -expected-id 0x2b900f0f ..."
 AUTO auto1.tap - use "jtag newtap auto1 tap -expected-id 0x07926001 ..."
 AUTO auto2.tap - use "jtag newtap auto2 tap -expected-id 0x0b73b02f ..."
 AUTO auto0.tap - use "... -irlen 4"
 AUTO auto1.tap - use "... -irlen 4"
 AUTO auto2.tap - use "... -irlen 6"
 no gdb ports allocated as no target has been specified

The patch tweaks IR setup a bit, so we can represent TAPs with
undeclared IR length.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-26 00:36:03 -07:00
David Brownell 0cac8b67be minor fixes to TODO list 2009-10-25 16:30:30 -07:00
David Brownell 19b84dafb0 ARM: rename "arm9tdmi vector_catch" to "arm9 ..."
And update doc accordingly.  That EmbeddedICE register was
introduced for ARM9TDMI and then carried forward into most
new chips that use EmbeddedICE.
2009-10-25 14:03:14 -07:00
Øyvind Harboe 0b436497e0 vector_catch and watchpoint TODO items. 2009-10-24 13:06:13 +02:00
David Brownell 814183a5c4 SVF: clean up, mostly for TAP state name handling
- Use the name mappings all the other code uses:
    + name-to-state ... needed to add one special case
    + state-to-name
 - Improve various diagnostics:
    + don't complain about a "valid" state when the issue
      is actually that it must be "stable"
    + say which command was affected
 - Misc:
    + make more private data and code be static
    + use public DIM() not private dimof()
    + shorten the affected lines

Re the mappings, this means we're more generous in inputs we
accept, since case won't matter.  Also our output diagnostics
will be a smidgeon more informative, saying "RUN/IDLE" not
just "IDLE" (emphasizing that there can be side effects).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-23 01:00:32 -07:00
Øyvind Harboe a1609e5ad1 Removed unused interface_jtag_set_end_state and wrote down some notes on TCP/IP client/server scheme. 2009-10-20 15:54:53 +02:00
Øyvind Harboe 1f917bdc0c Delete commented out code. Add a bit of error checking. 2009-10-13 12:10:23 +02:00
David Brownell 5e837387aa simplify XScale debug handler installation
Load the XScale debug handler from the read-only data section
instead of from a separate file that can get lost or garbaged.
This eliminates installation and versioning issues, and also
speeds up reset handling a bit.

Plus some minor bits of cleanup related to loading that handler:
comments about just what this handler does, and check fault codes
while writing it into the mini-icache.

The only behavioral changes should be cleaner failure modes after
errors during handler loading, and being a bit faster.

NOTE:  presumes GNU assembly syntax, with ".incbin"; and ELF,
because of the syntax of the ".size" directive.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-12 02:39:18 -07:00
David Brownell 55f4e430e8 Merge branch 'master' of ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd 2009-10-07 09:16:39 -07:00
dbrownell f2dc1eeef1 Note bug in handling of variables through command line parameters.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2819 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07 15:56:11 +00:00
David Brownell 7280a52e69 Merge branch 'master' of ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd 2009-10-05 01:27:43 -07:00
dbrownell 9a4e650083 Add list of JTAG adapter drivers with TAP_RESET statemove bug.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2764 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-27 17:08:42 +00:00
oharboe 379386743a added embedded ice programming while srst is asserted todo item
git-svn-id: svn://svn.berlios.de/openocd/trunk@2710 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-15 09:41:09 +00:00
oharboe f6a29d438e David Brownell <david-b@pacbell.net> some early todo items on run_algorithm
git-svn-id: svn://svn.berlios.de/openocd/trunk@2697 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11 21:14:31 +00:00
oharboe ed8fd94d7c added arm11 timeout error messages
git-svn-id: svn://svn.berlios.de/openocd/trunk@2647 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-28 13:43:26 +00:00
oharboe 641c574425 some arm11 stuff that isn't done yet.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2639 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-26 19:27:33 +00:00
oharboe 9a9ebfb924 reduce arm11 output noise
git-svn-id: svn://svn.berlios.de/openocd/trunk@2628 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-26 08:32:03 +00:00
oharboe f703322b3f aduc flash problems have been resolved
git-svn-id: svn://svn.berlios.de/openocd/trunk@2550 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-19 19:31:54 +00:00
oharboe 8b994145b8 Andreas Fritiofson <andreas.fritiofson@gmail.com> UTF8 fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@2549 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-17 19:54:25 +00:00
oharboe 14cbd545bf added item to come up with slick new 32 bit jtag_add_xxx() API
git-svn-id: svn://svn.berlios.de/openocd/trunk@2548 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-16 10:44:42 +00:00
oharboe c05cb61b32 wrote up workaround for xscale/debug_handler.bin bug
git-svn-id: svn://svn.berlios.de/openocd/trunk@2506 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-10 08:47:10 +00:00
oharboe ef7722e6af noted XScale (or USBProg) problem
git-svn-id: svn://svn.berlios.de/openocd/trunk@2505 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-10 08:46:12 +00:00
zwelch deda6ea509 Add comments to top-level files to "excuse" their Doxygen markup.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2500 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-08 22:26:20 +00:00
oharboe 13e6aa6e03 fix formatting of xscale bug entry(learning every day)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2498 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-08 10:38:50 +00:00
oharboe f19565b226 Xscale installation regression entered
git-svn-id: svn://svn.berlios.de/openocd/trunk@2497 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-08 10:25:39 +00:00
oharboe 51c0ef94d1 some TODO notes on aduc702x which clearly needs more work & testing
git-svn-id: svn://svn.berlios.de/openocd/trunk@2495 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-08 08:05:21 +00:00
oharboe 5c1ae65f8e i.MX27 reset problems fixed & update remaining reset problems notes
git-svn-id: svn://svn.berlios.de/openocd/trunk@2494 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-08 06:49:15 +00:00
oharboe 561502ae31 Zach Welch: move bugs into the right section
git-svn-id: svn://svn.berlios.de/openocd/trunk@2491 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-07 11:39:04 +00:00
oharboe 8ba6f13067 Use reference to mailing list for known arm926ejs bugs rather fill The List with lots of details
git-svn-id: svn://svn.berlios.de/openocd/trunk@2490 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-07 11:32:58 +00:00
oharboe 587aa64850 more arm926ejs bugs
git-svn-id: svn://svn.berlios.de/openocd/trunk@2486 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-07 10:33:20 +00:00
oharboe f21026e2f5 added known arm926ejs regressions
git-svn-id: svn://svn.berlios.de/openocd/trunk@2485 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-07 06:54:14 +00:00
oharboe e2dd1dbab9 added known problem w/line number's being off in syntax errors for target reset events
git-svn-id: svn://svn.berlios.de/openocd/trunk@2466 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 08:04:57 +00:00
zwelch 44f72dbdb2 Update TODO list to relect 0.2.0 release.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2442 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-01 19:55:34 +00:00
zwelch 2d0e1dbc02 Improve remaining documentation that was causing Doxygen warnings.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2026 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-03 04:44:38 +00:00
zwelch c41db358a0 Update TODO file with more content and better style.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2020 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-03 02:11:09 +00:00
zwelch f1f0d5e2d5 Update Doxygen markup in PATCHES, BUGS, and TODO:
- In the File List, these files are listed and link to empty pages.
- This patch adds @file blocks to reference the pages each file contains.
- Remove redundant "OpenOCD" from PATCHES title; it clutters the tree view.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1916 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-26 23:58:01 +00:00
oharboe fd780d43f5 removed solved mem2array problem.
Added questions regarding ideas on making tcl-less builds of OpenOCD

git-svn-id: svn://svn.berlios.de/openocd/trunk@1830 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-18 19:33:00 +00:00
oharboe ccee6fa702 updated w/jtag_add_end_state() note.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1829 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-18 19:28:26 +00:00
zwelch efd74e6fb5 Update The List with recent progress; remove developer list from TODO.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1828 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-18 19:06:43 +00:00