This change is necessary to debug AT91SAM9260 on my PC with a
FT2232H dongle.
Signed-off-by: Dimitar Dimitrov <dinuxbg@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This patch includes partial support for these new JTAG adapters.
More complete support will require updates to the libftdi code,
for EEPROM access.
[dbrownell@users.sourceforge.net: fix whitespace, linelen, etc ]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When the OpenOCD server starts up it records its state as TAP_RESET,
even though it could be anything. Then when it starts to examine
the scan chain, it calls jtag_add_tlr() which sees it doesn't have
any work to do, and so it does nothing. This can make the next
operations fail because they start from the wrong TAP state...
Instead of caring about the current recorded state, always enter
TAP_RESET by forcing five clocks with TMS high.
(NOTE: it seems most other JTAG adapter drivers have this same bug.)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2763 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- warning now issued if high speed ftdi device found and openocd was built using an old driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@2599 b42882b7-edfa-0310-969c-e2dbd0fdcd60
https://lists.berlios.de/pipermail/openocd-development/2009-August/009939.html
1. It can only be built with the FTD2XX driver. libftdi supports FT2232H/FT4232H
since version 0.16
2. A speed value of 0 is used as a RTCK request indicator. This clashes with the
valid clock division value 0 that provide the highest fixed clock frequency.
3. The ft2232_speed_div function return the maximum selectable frequency (30MHz)
when RTCK is activated. It should return 0.
4. The ft2232_khz function return ERROR_OK when RTCK is requested even for
devices lacking RTCK support. It should return ERROR_FAIL so the upper driver layers
can detect this and try to fallback to a fixed frequency.
5. FT2232H/FT4232H have a backward compatibility function that divide the clock
by 5 to get the same frequency range as FT2232D. There is no code that disable
this functionality. I can not find anything about if this is enabled or disabled by default.
I think it is safest to actively disable it.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This patch adds support for the Luminary Micro LM3S9B90 target and
LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the
Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a
new ft2232 layout called "luminary_icdi".
git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Bug fix: Return a syntax error when less than two arguments are given.
- Bug fix: Use parse_u16 helper to ensure vales are parsed properly.
- Simplify loop termination logic by ensuring argc is always even.
- Move loop induction variable declaration to where it is used.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2215 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Update handle_reset_config_command in tcl.c to use new helpers.
- Replace direct accesses in JTAG interface and target drivers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2161 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Setter calls the interface driver callback to improve core encapsulation.
- Use getter in standard JTAG interface drivers and ZY1000 minidriver.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Remove pernicious whitespace from ft2232 driver; as usual,
end-of-line noise, but here also much line-internal stuff.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2038 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Minor cleanup of FT2232:
- make Olimex glue warn about Olimex issues instead of JTAGkey issues;
- make some data static+const;
- don't export some internal symbols.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2037 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Initial support for FT2232H/FT4232H devices from FTDI.
- Add --enable-ftd2xx-highspeed option to configure script.
- Original patch submitted by Joern Kaipf <lists@joernline.de>.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1998 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Doc (mostly) update for jtag_khz:
- switch to @deffn syntax
- add entry for "jtag_rclk"
- move deprecated "jtag_speed" into collection of deprecated calls
And for ft2232, don't be the only adapter to *log* an error if RTCK
is requested; it's already reported properly, like any other nonfatal
command parameter. "jtag_rclk" just works as expected, without any
scarey messages.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1910 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Krzysztof Kajstura
Dimitar Dimitrov
Oleg Seiljus
David Brownell
dbrownell
oharboe
ntfreak
zwelch
duane
kc8apf