Commit Graph

74 Commits

Author SHA1 Message Date
Paul Fertser 4307d93eb0 Restore normal development cycle
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2021-03-07 15:44:45 +03:00
Paul Fertser f342aac084 The openocd-0.11.0 release
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2021-03-07 13:36:49 +03:00
Paul Fertser a5e526d857 The openocd-0.11.0-rc2 release candidate
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2021-01-25 00:24:17 +03:00
Antonio Borneo 77f468893e The openocd-0.11.0-rc1 release candidate
Change-Id: I111fec1304482f5c0f9d6ee988be8a2ea3de3981
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-12-09 20:34:22 +03:00
Paul Fertser 0ecee83266 Restore normal development cycle
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2017-01-23 00:46:51 +03:00
Paul Fertser 0e7bcf850b NEWS: last pre-release changes
Change-Id: I93203717f9096880298c10efebf05d59f888f34b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/3954
Tested-by: jenkins
2017-01-22 13:22:51 +00:00
Paul Fertser f6279c00c3 NEWS: mention SWO capture facility of the new J-Link driver
Change-Id: I4fc150584f3f0c5df5c39ae512125b42893331f0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/3948
Tested-by: jenkins
2017-01-15 15:20:16 +00:00
Paul Fertser d6fad0c90d NEWS: prepare for new release
Change-Id: I141ff17f6dcab7e164a19c91b975ddd455d26dbc
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/3854
Tested-by: jenkins
2016-12-25 14:11:16 +00:00
Paul Fertser 70a14db147 Restore normal development cycle
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-05-18 00:34:18 +03:00
Paul Fertser d8917e0c89 NEWS: last pre-release changes
Change-Id: Ibeb9078d19023b8cae5c0371079d5e4e1b5e3c57
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2776
Tested-by: jenkins
2015-05-17 21:53:08 +01:00
Paul Fertser 2e0023569f Add NEWS in preparation for the new release
Change-Id: I629158b59ff38f9b82a560f119a391bb97af43f2
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2701
Tested-by: jenkins
2015-04-24 16:08:30 +01:00
Paul Fertser 8fa67bd57d Restore normal development cycle
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-27 15:07:08 +04:00
Paul Fertser 186c442f9b NEWS: minor fixes for rc2
Change-Id: Iba04baae4f3278db8b36283574a82c077d28bb4a
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2113
Tested-by: jenkins
2014-04-15 04:31:23 +00:00
Paul Fertser 086a523ca8 NEWS: add release highlights
Change-Id: Ifa4459b3b7b58b639d6c885a2ea88cefbfac2680
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1881
Tested-by: jenkins
2014-03-29 17:23:01 +00:00
Freddie Chopin c765ef0ff6 Restore normal development cycle
1. Archive NEWS for 0.7.0 release
2. Add new blank NEWS file
3. Bump version to 0.8.0 and restore "-dev" suffix

Change-Id: I21febc042faeed294f3beeb5e683535dbf011e8f
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-05 10:45:03 +02:00
Spencer Oliver e12989a84b Update NEWS
Change-Id: Icfc1245552a400232988cf44f54e5c46af1db873
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1356
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2013-04-22 21:33:57 +00:00
Freddie Chopin a4830e7a6a Restore -dev suffix, archive NEWS file, add new blank NEWS file - start
new cycle for version 0.7.0.

Change-Id: I549bd815b62292ea4da6ed5c445c7c8a55521d9d
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-07 11:04:05 +02:00
Freddie Chopin 9a9f745eba Update NEWS
Added some missing items to NEWS file prior to final 0.6.0 release.

Change-Id: I69255c85fa8f4b6f06eae7c56f78072e3ec2d6f8
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/784
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-29 06:27:40 +00:00
Spencer Oliver a34b38d621 NEWS: add headline items
Change-Id: Ie78b0a171af76cf647deef501245caf54209d9f8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/639
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-21 16:14:25 +00:00
Jean-Christophe PLAGNIOL-VILLARD db87a2f375 Archive and recreate NEWS file.
Archive released NEWS file as NEWS-0.5.0.
Create new NEWS file from release script template.
2011-08-09 13:34:50 +08:00
David Brownell 66fb176766 two NEWS updates
Mention AVR32 AP7000 support.
Clarify ARM semihosting update was for V7M (not ARM9 etc).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-16 01:11:39 -04:00
David Brownell 2fdc1db304 lm3s811-ek uses generic stellaris target config
There's no point in an lm3s811-specific target file,
so remove it in favor of the generic "stellaris.cfg".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-07-17 02:59:23 -04:00
David Brownell 93f2afa45f initial "transport" framework
This adds the guts of a transport framework with initialization,
which should work with current JTAG-only configurations (tested
with FT2232).

Each debug adapter can declare the transports it supports, and
exactly one transport is initialized.  (with its commands) in
any given OpenOCD session.

  * Define a new "struct transport with init hooks and a few
 "transport"  subcommands to support it:

     "list" ... list the transports configured (just "jtag" for now)
     "select" ... makes the debug session use that transport
     "init" ... initializes the selected transport (internal)

  * "interface_transports" ... declares transports the current interface
    can support.  (Some will do this from C code instead, when there are
    no hardware versioning (or other) issues to prevent it.

Plus some FT2232 tweaks, including a few to streamline upcoming
support for an SWD transport (initially for Luminary adapters).

Eventually src/jtag should probably become src/transport, moving
jtag-specific stuff  to transport/jtag.

Signed-off-by: David Brownell <db@helium.(none)>
2010-07-02 16:45:28 -04:00
Spencer Oliver 631514724d NEWS: updates
Add new features since 0.4.0 release.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-06-03 10:20:06 +01:00
David Brownell d60ebc0ab5 jtag/tcl.c cleanup -- split out "adapter.c"
Clean up the jtag/tcl.c file, which was one of the biggest and
messiest ones in that directory.  Do it by splitting out all the
generic adapter commands to a separate "adapter.c" file (leaving
the "tcl.c" file holding only JTAG utilities).

Also rename the little-used "jtag interface" to "adapter_name", which
should have been at least re-categorized earlier (it's not jtag-only).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-27 10:07:13 -07:00
Spencer Oliver 3ad171cd53 SCRIPT: add add_script_search_dir cmd
Add a add_script_search_dir cmd so that adding search
dir's can be added to cfg scripts.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-17 09:57:44 +00:00
David Brownell 1bd3ae3986 rename jtag_nsrst_assert_width as adapter_nsrst_assert_width
Globally rename "jtag_nsrst_assert_width" as "adapter_nsrst_assert_width",
and move it out of the "jtag" command group ...  it needs to be used with
non-JTAG transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:42:26 -07:00
David Brownell b559b273b5 rename jtag_nsrst_delay as adapter_nsrst_delay
Globally rename "jtag_nsrst_delay" as "adapter_nsrst_delay", and move it
out of the "jtag" command group ...  it needs to be used with non-JTAG
transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:41:30 -07:00
David Brownell 96f9790279 rename jtag_khz as adapter_khz
Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag"
command group ...  it needs to be used with non-JTAG transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.  (We may want to
update it to include a nag message too.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:37:43 -07:00
Michal Demin 24e1e3dd26 Add support for Bus Pirate as a JTAG adapter.
This includes a driver and matching config file.  This support needs to be
enabled through the initial "configure" (use "--enable-buspirate").

Signed-off-by: Michal Demin <michaldemin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-11 11:35:50 -08:00
David Brownell 53b3d4dd53 LPC1768 updates, IAR board support
Fix some issues with the generic LPC1768 config file:

 - Handle the post-reset clock config:  4 MHz internal RC, no PLL.
   This affects flash and JTAG clocking.

 - Remove JTAG adapter config; they don't all support trst_and_srst

 - Remove the rest of the bogus "reset-init" event handler.

 - Allow explicit CCLK configuration, instead of assuming 12 MHz;
   some boards will use 100 Mhz (or the post-reset 4 MHz).

 - Simplify: rely on defaults for endianness and IR-Capture value

 - Update some comments too

Build on those fixes to make a trivial config for the IAR LPC1768
kickstart board (by Olimex) start working.

Also, add doxygen to the lpc2000 flash driver, primarily to note a
configuration problem with driver: it wrongly assumes the core clock
rate never changes.  Configs that are safe for updating flash after
"reset halt" will thus often be unsafe later ... e.g. for LPC1768,
after switching to use PLL0 at 100 MHz.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-02 15:02:01 -08:00
David Brownell e70d42a727 new "stellaris recover" command
Stellaris chips have a procedure for restoring the chip to
what's effectively the "as-manufactured" state, with all the
non-volatile memory erased.  That includes all flash memory,
plus things like the flash protection bits and various control
words which can for example disable debugger access.  clearly,
this can be useful during development.

Luminary/TI provides an MS-Windows utility to perform this
procedure along with its Stellaris developer kits.  Now OpenOCD
users will no longer need to use that MS-Windows utility.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-27 00:31:35 -08:00
David Brownell b853b9dbc0 Open the merge window for the 0.5.0 release cycle.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-21 13:27:37 -08:00
David Brownell a2ce3a51df NEWS: mention removal of obsolete commands
Removed remaining support for various commands, like advice for
migrating old-style TAP declarations.

The documentation no longer describes them either ... so if users have
been delaying config updates, they may need to consult older releases.

ALL this stuff has been clearly marked as "do not use" for at least a
year now, so anyone still using it hasn't been holding up their end.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-13 20:14:49 -08:00
David Brownell 82c3c47825 NEWS updates
Summarize most ARM11 and Cortex-A8 updates as "acting much more
like other ARMs", and mention code sharing.

Clarify a few other points, including support for "reset-assert"
on all ARMs except Cortex-M (which doesn't exactly need it).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-22 22:49:42 -08:00
David Brownell 187ccb60ee NEWS: include s3c64xx NAND driver
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-15 09:36:01 -08:00
David Brownell 73566405b6 NOR: add optional "flash erase_address" sector padding
Add a NOR flash mechanism where erase_address ranges can be padded
out to sector boundaries, triggering a diagnostic:

  > flash erase_address 0x0001f980 16
  address range 0x0001f980 .. 0x0001f98f is not sector-aligned
  Command handler execution failed
  in procedure 'flash' called at file "command.c", line 647
  called at file "command.c", line 361
  >

  > flash erase_address pad 0x0001f980 16
  Adding extra erase range, 0x0001f800 to 0x0001f97f
  Adding extra erase range, 0x0001f990 to 0x0001fbff
  erased address 0x0001f980 (length 16) in 0.095975s (0.163 kb/s)
  >

This addresses what would otherwise be something of a functional
regression.  An earlier version of the interface had a dangerous
problem:  it would silently erase data outside the range it was
told to erase.  Fixing that bug turned up some folk who relied on
that unsafe behavior.  (The classic problem with interface bugs!)
Now they can get that behavior again.  If they really need it,
just specify "pad".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-13 23:33:25 -08:00
David Brownell d91941d5a0 Cortex-M3: improved core exception handling
This updates three aspects of debugger/exception interactions:

 - Save the user's "vector_catch" setting, and restore it after reset.
   Previously, it was obliterated (rather annoyingly) each time.

 - Don't catch BusFault and HardFault exceptions unless the user says
   to do so.  Target firmware may need to handle them.

 - Don't modify SHCSR to prevent escalating BusFault to HardFault.
   Target firmware may expect to handle it as a HardFault.

Those simplifications fix several bugs.  In one annoying case, OpenOCD
would cause the target to lock up on ome faults which triggered after
the debugger disconnected.

NOTE:  a known remaining issue is that OpenOCD can still leave DEMCR
set after an otherwise-clean OpenOCD shutdown.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-13 03:17:23 -08:00
David Brownell c1cb20971e Coexist with quilt: rename PATCHES --> PATCHES.txt
The issues is on Win32, which ignores case in filesystem
and thus doesn't tolerate the quilt "patches" directory.

Rename, and add "patches" to .gitignore so that developers
can choose to use quilt for local patch management.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-08 17:20:47 -08:00
David Brownell ec297e4bf1 Fix Luminary FT2232 layout docs/configs
Most of this patch updates documentation and comments for various
Luminary boards, supporting two bug fixes by helping to make sense
of the current mess:

 - Recent rev C lm3s811 eval boards didn't work.  They must use
   the ICDI layout, which sets up some signals that the older
   boards didn't need.  This is actually safe and appropriate
   for *all* recent boards ... so just make "luminary.cfg" use
   the ICDI layout.

 - "luminary-lm3s811.cfg", was previously unusable!  No VID/PID;
   and the wrong vendor string.  Make it work, but reserve it
   for older boards where the ICDI layout is wrong.

 - Default the LM3748 eval board to "luminary.cfg", like the
   other boards.  If someone uses an external JTAG adapter, all
   boards will use the same workaround (override that default).

The difference between the two FT2232 layouts is that eventually
the EVB layout will fail cleanly when asked to enable SWO trace,
but the ICDI layout will as cleanly be able to enable it.  Folk
using "luminary.cfg" with Rev B boards won't see anything going
wrong until SWO support is (someday) added.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-28 12:59:47 -08:00
Catalin Patulea 84dbf8ab5a Driver for USB-JTAG, Altera USB-Blaster and compatibles
The 10-pin JTAG layout used with these adapters is used by
a variety of platforms including AVR.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26 15:05:06 -08:00
David Brownell 07c06ec5e2 Packaging fix, NEWS update
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-21 12:50:17 -08:00
David Brownell abe8b43755 ETM: add "etm trigger_debug" command
In conjunction with manual register setup, this lets the ETM trigger
cause entry to debug state.   It should make it easier to test and
bugfix the ETM code, by enabling non-trace usage and isolating bugs
specific to thef ETM support.  (One current issue being that trace
data collection using the ETB doesn't yet behave.)

For example, many ARM9 cores with an ETM should be able to implement
four more (simple) breakpoints and two more (simple) watchpoints than
the EmbeddedICE supports.  Or, they should be able to support complex
breakpoints, incorporating ETM sequencer, counters, and/or subroutine
entry/exit criteria int criteria used to trigger debug entry.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-19 13:09:19 -08:00
David Brownell 9abad965ab ETM trigger_percent becomes an ETB command
This command was misplaced; it's not generic to all traceport drivers,
only the ETB supports this kind of configuration.  So move it, and
update the relevant documentation.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-19 13:06:46 -08:00
David Brownell bfadd79965 NEWS: mention libftdi 0.17 2009-12-19 13:01:30 -08:00
David Brownell 3f18900b19 NOR FLASH: only erase/unlock whole sectors
Much to my surprise, I observed a "flash erase_address ..."
command erasing data which I said should not be erased.

The issue turns out to be generic NOR flash code which was
silently, and rather dangerously, morphing partial-sector
references into unrequested whole-sector ones.

This patch removes that low-level morphing.  If desired, it
can and should be done in higher level code.  (We might need
to fix some stuff in the GDB server code.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-18 10:16:52 -08:00
David Brownell a0edb8a328 ARM11: basic watchpoint support
Use the DPM watchpoint support; remove old incomplete stubs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-04 18:57:31 -08:00
Nicolas Pitre ed59dfc80a basic ARM semihosting support
Semihosting enables code running on an ARM target to use the
I/O facilities on the host computer. The target application must
be linked against a library that forwards operation requests by
using the SVC instruction that is trapped at the Supervisor Call
vector by the debugger.  The "hosted" library version provided
with CodeSourcery's Sourcery G++ Lite for ARM EABI is one example.

This is currently available for ARM9 processors, but any ARM
variant should be able to support this with little additional work.

Tested using binaries compiled with Sourcery G++ Lite 2009q1-161
and ARM RVCT 3.0.

[dbrownell@users.sourceforge.net: doc tweaks, NEWS]

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-03 18:42:01 -08:00
David Brownell a65e75ea34 Tcl and doc: update to match new 'arm mcr ...' etc
Make them match the C code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-01 01:10:19 -08:00
David Brownell 5782999f60 NEWS: mention new reset-assert event
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-27 18:53:43 -08:00