Updates to private TAP state tables in amtjtagaccel interface driver.
The first change is the neccesary one to correct a long-standing bug that
caused the IDCODE to be shifted by one bit too many. This was caused by
an incorrect path from state RESET to state DRSHIFT.
The value of those 2 bytes were 0x8a and 0x04. This means that the
bitstream to do this transition is 0b 00100 01010 (send LSB first). This
will bring you from the reset state to the shift state; however, you
enter the shift-state twice, which explains why the ID-CODE that will be
read next will be shifted 1 bit. The fix changes these to 0x05 and 0x00.
This will send the bitstream 0b 00101 (send LSB first). This will bring
the TAP controller from the RESET state to the DRSHIFT state directly,
without entering the DRSHIFT state twice.
After checking the whole table, two other transitions were found that
could be optimized (5 bits in stead of 10 bits).
Summary off all changes:
From To Old values Old Bitstream New values New Bitstream Remarks
---- ------- ---------- ------------- ---------- ------------- -------
RESET DRSHIFT 0x8a 0x04 0b00100 01010 0x05 0x00 0b00101 1,2
IDLE DRSHIFT 0x85 0x08 0b01000 00101 0x04 0x00 0b00100 2
IDLE IRSHIFT 0x8b 0x08 0b01000 01011 0x06 0x00 0b00110 2
[1] Fixes the IDCODE bug
[2] Optimization
git-svn-id: svn://svn.berlios.de/openocd/trunk@2472 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Show the port number to the user when asking for it or setting it.
- Print an error if the amt_jtagaccel_port has already been set.
- Use parse_u16 helper to ensure amt_jtagaccel_port string parses correctly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2210 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Update handle_reset_config_command in tcl.c to use new helpers.
- Replace direct accesses in JTAG interface and target drivers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2161 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Setter calls the interface driver callback to improve core encapsulation.
- Use getter in standard JTAG interface drivers and ZY1000 minidriver.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c
- free working area and register stuff if str7x block write algorithm failed
- check PC after exiting a target algorithm in armv4_5.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- redirect output from target event scripts (currently only reset) to the daemon output (INFO:)
- some minor fixes and enhancements
git-svn-id: svn://svn.berlios.de/openocd/trunk@103 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed small bug in str7x.c that printed an address instead of the target number in an error message
- added support for Olimex ARM-USB-OCD. The new ft2232 layout is called "olimex-jtag"
git-svn-id: svn://svn.berlios.de/openocd/trunk@87 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too)
- various fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
