Commit Graph

5 Commits

Author SHA1 Message Date
Tomas Vanek f3b1405fdd AT91SAM4L: handle reset run/halt in SMAP
This is a remake of http://openocd.zylin.com/1966
originally written by Angus Gratton <gus@projectgus.com>

ATSAM4L has a "System Manager Access Port" (SMAP) that holds the CPU
in reset if TCK is low when srst (RESET_N) is deasserted.
Without this change any use of sysresetreq or srst locks the chip
in reset state until power is cycled.

A new function smap_reset_deassert is called as reset-deassert-post event handler.
It optionally prepares reset vector catch and SMAP reset is released then.

Change-Id: Iad736357b0f551725befa2b9e00f3bc54504f3d8
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2604
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 15:47:43 +01:00
Andrey Smirnov ccf4d6d648 cortex_m: Do additional initialization during reset
SAM4L requires additional steps to be taken right after SYSRESETREQ is
issued in order to function robustly:

       - CMSIS-DAP DAP driver needs to explicitly check for sticky bit
         errors since it is possible for adapter to perform successful
         write opration, report no errors and then, under the hood, do
         some other things that will result in sticky bit being set.

       - Debugger needs to wait for security system to finish
         intialization and assert CDBGPWRUPACK before proceeding

This change is related to commit http://openocd.zylin.com/#/c/1995/

Change-Id: I741c95a809bfd60d930cec9482239e4796a62326
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2088
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
2014-06-28 09:30:09 +00:00
Spencer Oliver 0694bc652d cfg: change default SAM4L cortex_m reset_config
From testing this target does not seem to support using SYSRESETREQ, change
the default to the safe VECTRESET.

This target also has other reset issues (srst not working) that will be
addressed in another patch.

Change-Id: Icfc78347dc71aa3a062ddea63190a818d7fbc760
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1995
Tested-by: jenkins
Reviewed-by: Angus Gratton <gus@projectgus.com>
2014-03-17 12:50:17 +00:00
Andrey Yurovsky 9cabe333e1 add support for Atmel SAM4L NOR Flash
This adds a new NOR Flash driver, "at91sam4l", which supports the
built-in Flash on Atmel's low-power SAM4L family of Cortex M4 MCUs.
Parts and their geometry are detected automatically using the Chip ID
and lookup schemes described in document 42023E–SAM–07/2013.

Tested on AT91SAM4LC4CA via the SAM4L XPlained Pro development kit.

Change-Id: If73499dee92cc8ce231845244ea25c6984f6cecd
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1639
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09 15:23:15 +00:00
Spencer Oliver 67f664a068 cfg: add initial Atmel xplained kit support
These kits feature a CMSIS-DAP compliant debugger and so have been added
as part of the pending support.

Currently the flash drivers for the L8 and D20 are wip.

One issue this implementation of CMSIS-DAP raised is that it supports
512byte HID reports, however using the current HIDAPI we have no cross platform
way of querying this info. Long term we plan to add this support to HIDAPI.

Change-Id: Ie8b7c871f58a099d963cd71a9f8a0105a38784e9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1625
Tested-by: jenkins
2014-01-09 15:22:56 +00:00