Commit Graph

144 Commits

Author SHA1 Message Date
Øyvind Harboe 32ab98c9e9 zy1000: split out configure option for eCos and JTAG master
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-20 13:08:16 +02:00
Øyvind Harboe 814c2a8f9a build: enable -Wshadow by default
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-16 08:58:40 +02:00
Michal Demin 24e1e3dd26 Add support for Bus Pirate as a JTAG adapter.
This includes a driver and matching config file.  This support needs to be
enabled through the initial "configure" (use "--enable-buspirate").

Signed-off-by: Michal Demin <michaldemin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-11 11:35:50 -08:00
David Brownell b853b9dbc0 Open the merge window for the 0.5.0 release cycle.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-21 13:27:37 -08:00
David Brownell 56e74908d1 Label builds as OpenOCD v0.4.0
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-21 12:20:13 -08:00
David Brownell 4c4ec09110 Restore "-dev" version suffix (0.4.0-rc2-dev)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-13 15:28:05 -08:00
David Brownell a0a1be5cd6 v4.0-rc2 milestone
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-13 14:47:17 -08:00
Antonio Borneo 7c5acf8660 whitespace cleanup, mostly for docs
Remove useless space/tab at end of lines.
Remove spaces in indentation and replace with tab.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-30 11:51:29 -08:00
Catalin Patulea 84dbf8ab5a Driver for USB-JTAG, Altera USB-Blaster and compatibles
The 10-pin JTAG layout used with these adapters is used by
a variety of platforms including AVR.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26 15:05:06 -08:00
David Brownell 4e2b15fc93 Restore "-dev" version suffix
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-21 14:49:36 -08:00
David Brownell 0c55017a22 v0.4.0-rc1 milestone
Winter Solstice, 2009.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-21 14:45:52 -08:00
Zachary T Welch 4bbe7d174f change autoconf #include in configure.in
Updates "system.h" and "replacements.h" with <helpers/system.h> and
<helpers/replacements.h> respectively.
2009-12-03 01:59:24 -08:00
Zachary T Welch 865efd828a move jtag drivers to src/jtag/drivers
Moves JTAG interface drivers to src/jtag/drivers/,
Adds src/jtag/drivers/Makefile.am.
Builds libocdjtagdrivers.la.

Flattens the rlink driver files into the drivers/ directory, adding
the 'rlink_' prefix or '.rlink' suffix as appropriate.
2009-12-02 23:27:09 -08:00
Zachary T Welch fe9228a32d move nor drivers to src/flash/nor
Moves NOR flash drivers to 'src/flash/nor/'.
Adds 'src/flash/nor/Makefile.am'.
Builds 'libocdflashnor.la'.
2009-12-02 23:27:09 -08:00
Zachary T Welch e1ec02bb05 move nand drivers to src/flash/nand/
Moves NAND drivers to src/flash/nand/.
Adds src/flash/nand/Makefile.am.
Builds libocdflashnand.la.
2009-12-02 23:27:09 -08:00
Zachary T Welch b123fd3cd9 fix configure problem when building w/o USB
If building OpenOCD without any USB drivers, a warning would appear
because $build_usb is never set to a sane default.  This fixes it.
2009-12-02 22:32:08 -08:00
Zachary T Welch 6ec526e706 remove #if BUILD_HTTPD
Add httpd_stubs.c to provide no-op implementations of httpd_start()
and httpd_stop().

Allows these routines to be called unconditionally and ensures the
libocdserver ABI remains unchanged regardless of whether this feature
was built-in or not.

Prints a DEBUG message when the stub implementation is included.
2009-12-02 13:26:26 -08:00
Zachary T Welch eaf10f69de remove BUILD_IOUTIL symbol
Add ioutil_stubs.c to provide an empty ioutil_init() routine.
Add ioutil.h to prevent applications from needing to declare it.

Allows unconditionally calling that function during startup, and the
resulting libocdhelper library API is now more stable.

Prints a DEBUG message when the stub implementation is included.
2009-12-02 13:26:26 -08:00
Zachary T Welch 3a660e2293 add jtag/usb_common.[ch] files
Begins to consolidate code used by several USB JTAG interfaces.
This first patch provides the required build system changes and
a common jtag_usb_open routine, which will replace the guts for
probing the busses and devices for possible VID/PID matches.
The following patches convert each driver to use it.
2009-11-24 07:30:19 -08:00
Zachary T Welch 0091e59d2a allow documentation to be configured
Add --disable-doxygen-html and --enable-doxygen-pdf options to the
configure script, allowing user to change the defaults.  These
update the proess of munging the Doxygen configuration file to
use the settings thusly provided.  Add options in README.
2009-11-17 11:42:48 -08:00
Liam Redmond 26849ad60d WinXP-x64: find right D2XX libraries
This trivial patch allows the config script to find the correct
FTDI2xx libraries under Windows XP x64 using msys.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-12 12:50:41 -08:00
David Brownell 067501b0c7 Version 0.4.0-dev
Add "-dev" tag.  Update minor version number.
Archive old NEWS file, start a new one.
2009-11-04 19:44:36 -08:00
David Brownell 1d5a3a6bcd Version 0.3.0
Remove -dev tag, remove -rc tag.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04 19:39:59 -08:00
Øyvind Harboe b8e7408b92 configure: fix build problems with eCos
Various include files require some other include files
to be included first. Copied solution from net/if.h.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-04 19:27:53 +01:00
Zachary T Welch b628207ea6 Bump rc version and add -dev tag.
Bump rc package version number: 0.3.0-rc0 -> 0.3.0-rc1
Add '-dev' version tag: 0.3.0-rc1 -> 0.3.0-rc1-dev
2009-10-28 21:23:17 -07:00
Zachary T Welch 70f735007d The openocd 0.3.0-rc0 release.
Remove '-dev' version tag: 0.3.0-rc0-dev -> 0.3.0-rc0
2009-10-28 21:23:17 -07:00
David Brownell 344bed2f7e ETM: rename registers, doc tweaks
The register names are perversely not documented as zero-indexed,
so rename them to match that convention.  Also switch to lowercase
suffixes and infix numbering, matching ETB and EmbeddedICE usage.

Update docs to be a bit more accurate, especially regarding what
the "trigger" event can cause; and to split the issues into a few
more paragraphs, for clarity.

Make "configure" helptext point out that "oocd_trace" is prototype
hardware, not anything "real".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-22 12:01:27 -07:00
Redirect 'Slash' NIL fb61f52731 MinGW: always use "-D__USE_MINGW_ANSI_STDIO"
This is unfortunately needed to make stdio work like OpenOCD expects -- matching
the ANSI-C standard, instead of MS-Windows.

I tested it in both MinGW-W64 on Vista 64 and MinGW-W32 on XP, and I don't
see any adverse effects to enabling it for all MinGW versions.
2009-10-19 17:55:40 -07:00
David Brownell cb7965da15 xscale: better fix for debug_handler.bin
Generate a C struct with the data, and use that, instead of an
assembly language file.  The assembly language causes issues on
Darwin and MS-Windows, which don't necessarily use GNU AS; or
if they do, don't necessarily use its ELF syntax.

It's also better in two other ways:  fewer global symbols; and
the init-time size check gets optimized away at compile time.
(Unless it fails, in which case bigger chunks of the file vanish.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-16 13:52:40 -07:00
David Brownell 5e837387aa simplify XScale debug handler installation
Load the XScale debug handler from the read-only data section
instead of from a separate file that can get lost or garbaged.
This eliminates installation and versioning issues, and also
speeds up reset handling a bit.

Plus some minor bits of cleanup related to loading that handler:
comments about just what this handler does, and check fault codes
while writing it into the mini-icache.

The only behavioral changes should be cleaner failure modes after
errors during handler loading, and being a bit faster.

NOTE:  presumes GNU assembly syntax, with ".incbin"; and ELF,
because of the syntax of the ".size" directive.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-12 02:39:18 -07:00
dbrownell b1f7b35983 Change version labels to work better with GIT
- The guess-rev.sh script is now a tweaked version of "setlocalversion" as
   seen in Linux, U-Boot, and various other projects.  When it finds source
   control support (git, hg, svn) it uses IDs from there.  Else (specific
   to this project) it reports itself as "-snapshot", e.g. from gitweb.

   I verified this new "guess-rev.sh" script runs under Cygwin.

 - Also update the generic version strings to be like "0.3.0-dev" (during
   development) instead of the very long "0.3.0-in-development".  These also
   show up in the PDF docs.  For better tracking, we might eventually change
   these strings to include the version IDs too.

 - Change the startup banner version strings so they include the guess-rev
   output.  Development and release versions with GIT will be like

    Open On-Chip Debugger 0.3.0-dev-00282-g7191a4f-dirty (2009-10-05-20:57) 
    Open On-Chip Debugger 0.3.0 (2009-10-05-20:57) 

   instead of the previous SVN-specific (even when using git-svn!)

    Open On-Chip Debugger 0.3.0-in-development (2009-10-05-01:39) svn:exported
    Open On-Chip Debugger 0.3.0 (2009-10-05-01:39) Release



git-svn-id: svn://svn.berlios.de/openocd/trunk@2809 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07 05:43:05 +00:00
ntfreak ef30f22fd3 - remove enable-ft2232-highspeed configure option, high speed ftdi support is now detected during the configure stage
- warning now issued if high speed ftdi device found and openocd was built using an old driver

git-svn-id: svn://svn.berlios.de/openocd/trunk@2599 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-20 07:54:49 +00:00
ntfreak a634b5d52e Jonas Horberg [jhorberg@sauer-danfoss.com]
https://lists.berlios.de/pipermail/openocd-development/2009-August/009939.html

1. It can only be built with the FTD2XX driver. libftdi supports FT2232H/FT4232H 
since version 0.16 

2. A speed value of 0 is used as a RTCK request indicator. This clashes with the 
valid clock division value 0 that provide the highest fixed clock frequency. 

3. The ft2232_speed_div function return the maximum selectable frequency (30MHz) 
when RTCK is activated. It should return 0. 

4. The ft2232_khz function return ERROR_OK when RTCK is requested even for 
devices lacking RTCK support. It should return ERROR_FAIL so the upper driver layers 
can detect this and try to fallback to a fixed frequency. 

5. FT2232H/FT4232H have a backward compatibility function that divide the clock 
by 5 to get the same frequency range as FT2232D. There is no code that disable 
this functionality. I can not find anything about if this is enabled or disabled by default. 
I think it is safest to actively disable it. 


git-svn-id: svn://svn.berlios.de/openocd/trunk@2591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18 14:41:58 +00:00
ntfreak 9b29b729f3 - add configure error if building parport interface under cygwin and sys/io.h missing
git-svn-id: svn://svn.berlios.de/openocd/trunk@2571 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-31 08:52:03 +00:00
ntfreak 4ebd353ae1 - disable using parport ppdev under win32 hosts
git-svn-id: svn://svn.berlios.de/openocd/trunk@2545 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-16 10:03:33 +00:00
zwelch f9c65b5cd5 Bump minor version and add tag:
Bump minor package version number: 0.2.0 -> 0.3.0
Add '-in-development' version tag: 0.3.0 -> 0.3.0-in-development

git-svn-id: svn://svn.berlios.de/openocd/trunk@2521 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14 08:54:36 +00:00
zwelch 64d998e584 Remove '-in-development' version tag: 0.2.0-in-development -> 0.2.0
git-svn-id: svn://svn.berlios.de/openocd/trunk@2517 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14 08:53:40 +00:00
zwelch 6d20e27f9a Make the parport-ppdev option enabled by default. This may require
giving --disable-parport-ppdev to configure on some platform(s).


git-svn-id: svn://svn.berlios.de/openocd/trunk@2514 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14 06:39:55 +00:00
ntfreak d41f2bfb14 - fix build when using a cross compiler - do not try and run any host tools
- add missing types.h when platform does not contain elf.h

git-svn-id: svn://svn.berlios.de/openocd/trunk@2482 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 15:19:10 +00:00
zwelch 00fad24996 Remove --enable-release option; if guess-rev.sh is missing, it is a release.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2456 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02 11:17:14 +00:00
zwelch 7d3706c980 Extend 'make dist' to produce both .tar.bz2 and .zip archives, to
complement to the standard .tar.gz package.  Now, pick your poison!


git-svn-id: svn://svn.berlios.de/openocd/trunk@2437 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 21:45:34 +00:00
ntfreak 38a1ae7281 - correct configure ftd2xx highspeed test
git-svn-id: svn://svn.berlios.de/openocd/trunk@2385 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-24 08:12:45 +00:00
mifi 5f48cefb10 Set default for want_ftd2xx_highspeed to "no" instead of "maybe"
git-svn-id: svn://svn.berlios.de/openocd/trunk@2295 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-20 18:19:21 +00:00
oharboe 8d8937f1a6 dummy driver now works under eCos
git-svn-id: svn://svn.berlios.de/openocd/trunk@2268 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-17 10:51:34 +00:00
zwelch 82aa9af1ad Improve use of automake conditionals for FTDI-based JTAG drivers:
- Remove once-used XXX_FTD2XX symbols; replace with XXX_DRIVER symbols.
- Enabled when either libftdi or FTD2xx driver should be built.
- Eliminates redundant DRIVERSFILE assignment in JTAG automake input.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09 14:18:28 +00:00
zwelch 9d19468502 Add a rule to rebuild libtool if ltmain.sh changes (from libtool docs).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2174 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09 12:01:56 +00:00
oharboe 5f4ecc60a9 dos2unix
git-svn-id: svn://svn.berlios.de/openocd/trunk@2170 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09 08:59:54 +00:00
oharboe 7a53ff6633 remove native line style
git-svn-id: svn://svn.berlios.de/openocd/trunk@2154 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09 07:51:47 +00:00
oharboe 3245a0cd5f update zy1000 to latest minidriver work
git-svn-id: svn://svn.berlios.de/openocd/trunk@2132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-08 14:13:32 +00:00
oharboe 76d9c3d5b8 Zach Welch wrote a fix for configure problems under Cygwin.
ltmain.sh is added to svn ignore

git-svn-id: svn://svn.berlios.de/openocd/trunk@2131 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-08 13:57:13 +00:00