imi415/openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,883 Commits 2 Branches 29 Tags 18 MiB
fa1f2682d4
Commit Graph

311 Commits

Author SHA1 Message Date
Damjan Marion
096fd6bcc0 Board definition for mini6410/tiny6410 (ARM1176) 
The following mini6410/tiny6410 functions are available:
init_6410 - initialize clock, timer, DRAM
init_6410_flash - initializes NAND flash support
install_6410_uboot - copies u-boot image into RAM and runs it
 2011-05-29 23:42:09 +02:00
Damjan Marion
ba576920cf SMDK6410 is not target, move file to board 2011-05-29 20:05:01 +02:00
Rodrigo L. Rosa
129f099ef1 flash support (only full erase/write) for 568013 and 568037 2011-05-18 18:47:55 +02:00
Rodrigo L. Rosa
9d4aec6bda partial support for 568013 and 568037, target integration. 2011-05-18 18:47:50 +02:00
Øyvind Harboe
289cecebf0 beagleboard: add support for various icepick versions 
The beagleboard icepick jtag tap id's vary.
 2011-05-05 15:47:12 +02:00
Jonas Hoerberg
2889471b58 at91rm9200-ek: add low default communication speed 2011-05-05 15:43:37 +02:00
Alexandre Pereira da Silva
522d5b84e2 Add support for the lpc2460 target 2011-05-03 22:07:01 +02:00
Alexandre Pereira da Silva
743fada06a Make the lpc2xxx generic driver support romless parts 2011-05-03 22:06:57 +02:00
Michel Jaouen
d2911627d2 u8500.cfg : ste u8500 support 2011-04-28 12:22:47 +02:00
Luca Ellero
041953f3b1 Add preliminary support for Freescale iMX53 
Signed-off-by: Luca Ellero <lroluk@gmail.com>
 2011-04-13 21:32:00 +02:00
Alexandre Pereira da Silva
5cc83a880a Add the REV A tap id to the LPC3250 configuration 2011-04-13 21:28:44 +02:00
Jean-Christophe PLAGNIOL-VILLARD
d6027ca6a8 at91: add at91sam9263 chip register definition 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-04-09 19:19:36 +02:00
Jean-Christophe PLAGNIOL-VILLARD
ba71e8c521 at91: add chip register definition and generic init support 
for
 - pio
 - pmc
 - rstc
 - wdt
 - sdramc
 - smc

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-04-09 19:18:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD
28e6dcee85 add at91sam9263-ek support 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-04-09 10:16:28 +02:00
Jean-Christophe PLAGNIOL-VILLARD
22437fac28 add at91sam9261-ek support 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-04-09 10:14:46 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5d538084be at91: add at91sam9261 chip register definition 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-04-09 10:13:59 +02:00
Øyvind Harboe
3fea99097e pandaboard: use new -dbgbase option to workaround broken ROM table 
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
 2011-04-02 09:00:01 +02:00
Øyvind Harboe
6c5e1781a1 omap4430: cortex a9 and a8 are now merged again 
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
 2011-03-22 09:10:21 +01:00
Aaron Carroll
59a6380a17 omap4430: add Blaze config 
Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
 2011-03-13 14:59:39 +01:00
Aaron Carroll
cc9939879c omap4430: force hardware breakpoints for GDB 
Soft breakpoints are currently broken if the MMU is enabled due to incorrect
cache flushing.  Until this is fixed, force the use of hardware breakpoints.

Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
 2011-03-13 14:58:57 +01:00
Jean-Christophe PLAGNIOL-VILLARD
df500c5a04 at91: add at91sam9g45 support 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-03-03 22:49:47 +01:00
Jean-Christophe PLAGNIOL-VILLARD
a4bf71386b at91: add at91sam9g10 support 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-03-03 22:49:47 +01:00
Jean-Christophe PLAGNIOL-VILLARD
aebc0d5556 at91sam9260: update sram information 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-03-03 22:49:47 +01:00
Jean-Christophe PLAGNIOL-VILLARD
f6783d4465 at91: add at91sam9263 support 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-03-03 22:49:47 +01:00
Jean-Christophe PLAGNIOL-VILLARD
26db0a6bef at91: add at91sam9261 support 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-03-03 22:49:46 +01:00
Jean-Christophe PLAGNIOL-VILLARD
e941805713 at91sam9: factorise cpu support 
all at91sam9 are nearly the same except sram and soc name

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-03-03 22:49:46 +01:00
Jean-Christophe PLAGNIOL-VILLARD
f26cd96740 add at91rm9200-ek board support 
tested with jlink sam-ice v5 while loading barebox

(gdb) load
Loading section .text, size 0x2f190 lma 0x21f00000
Loading section .rodata, size 0x931c lma 0x21f2f190
Loading section .data, size 0x29e8 lma 0x21f384ac
Loading section .barebox_cmd, size 0x78c lma 0x21f3ae94
Loading section .barebox_initcalls, size 0x80 lma 0x21f3b620
Start address 0x21f00000, load size 243360
Transfer rate: 26 KB/sec, 13520 bytes/write.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
 2011-02-23 08:13:59 +01:00
Luca Ellero
578294dbdd stm32: add ID for medium density device Rev Z 
stm32-discovery evaluation board (STM32F100RBTB6):
reading device id register (0xE0042000) returns 0x10010420

Signed-off-by: Luca Ellero <lroluk@gmail.com>
 2011-02-18 08:08:31 +01:00
Luca Ellero
6684b35346 omap4430: Add JRC TAPID for PandaBoard REV EA1 (PEAP platforms) 
PandaBoard REV EA1 (Panda Early Adopter Program) has a different ID.
This patch add alternate REV EA1 TAP id to configuration file

Signed-off-by: Luca Ellero <lroluk@gmail.com>
 2011-02-08 09:51:54 +01:00
Aaron Carroll
aaf145c422 omap4430: fix reset sequence 
* Write to the PRM reset control register should have been 'phys';
* Setup empty reset-assert handlers for the M3's, since the board-level reset
  takes care of them;
* Remove the dbginit cruft, because it gets called implicitly on reset.

Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
 2011-02-02 08:32:10 +01:00
Aaron Carroll
4592506b8e TCL configs for OMAP4430 and Pandaboard 
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
 2011-01-31 08:57:50 +01:00
Mathias K
6df10184f6 - add xds100v2 configuaration file 
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
 2011-01-27 10:32:39 +00:00
Freddie Chopin
61e1e525c1 Add another level of procedures to LPC2xxx initialization - procedures for specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else. 
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
 2011-01-09 21:34:02 +01:00
Freddie Chopin
94fa8fd30a Add common LPC2xxx setup procedure, use in all LPC2xxx files. 
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
 2011-01-07 16:09:31 +01:00
Michael Schwingen
1795239cfd actux3.cfg: add function to setup for u-boot debugging 
Signed-off-by: Michael Schwingen <michael@schwingen.org>
 2011-01-02 21:17:57 +01:00
Spencer Oliver
3d834bdab7 stm32: add stm32 xl family flash support 
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
 2010-12-23 12:11:14 +00:00
Øyvind Harboe
8b41812da3 lpc2148: redo to the new target configuration scheme 
Define a proc which PCBs can easily override.

Also demonstrates how to add multiple TAP exepcted-id's
using arguments.

Added 0x3f0f0f0f as expected TAP-id. Old LPC2148 silicon
I happened to have on my desk?

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
 2010-12-22 17:44:22 +01:00
Tormod Volden
29d2d15f3f tcl/interface/flashlink.cfg: Fix broken ST URL 2010-12-20 07:52:29 +01:00
Tormod Volden
d33f4a2ad5 tcl/board: Clean up STM32 EVAL boards configurations 
Make consistent use of hex memory size for flashing.

Delete stm32f10x_128k_eval.cfg. It has no product reference
nor any settings in it.
 2010-12-20 07:52:28 +01:00
Tormod Volden
9f18afc39e tcl/board: Fix ST URLs in stm32* eval board configuration files 
ST recently rewamped (screwed up) their web site and broke all links.
Also match the chip names with those on the web site product
descriptions.
 2010-12-20 07:52:26 +01:00
Michael Schwingen
23bf724e04 update IXP42x target / XBA board config 2010-12-19 22:16:31 +01:00
Michael Trensch
6839618062 Add support for Hilscher netX controllers 2010-12-18 21:11:57 +01:00
Antonio Borneo
30da7c67ce TCL: fix non TCL comments 
End of line comments fixed with ';' before '#'.
Added few additional 'space' to keep indentation in
multi-line comments.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
 2010-12-18 21:04:22 +01:00
Spencer Oliver
c6e07051e6 stm32: add STM32E-EVAL external memory config script 
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
 2010-12-10 13:36:10 +00:00
Freddie Chopin
4bd2b30d5b remove srst_pulls_trst from LPC2xxx target scripts 
LPC2xxx do not require reset_config srst_pulls_trst. This can cause various "strange" problems when flashing the chip, because "reset halt" actually allows the chip to run for some short period of time and execute some code.

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
 2010-12-09 22:54:31 +01:00
Rolf Meeser
6ef4e97779 lpc2478 target config: CCLK as (mandatory) parameter 2010-12-05 13:37:57 +01:00
Rolf Meeser
81790fb56a Add board config for Embedded Artists LPC2478-32 2010-12-04 09:36:47 +01:00
Rolf Meeser
bd9d2468cb Fix flash name in Hitex LPC2929 board config 2010-12-04 09:36:17 +01:00
Spencer Oliver
0ac6c0d1a8 stm32: set default soft reset config 
If no srst is configured then default to using sysresetreq to
reset the target.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
 2010-12-03 09:02:10 +00:00
Spencer Oliver
7b2687b45b luminary: remove unused config cmds. 
Due to commit e40aee2954d2beabe1d8c530d9ff1e564fb01f48 we now honour the
targets 'reset_config' setting. Previously we ignored the srst setting
for luminary targets.

Luminary targets have never supported using srst to reset into debug mode
so remove the option from the target configs files.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
 2010-12-03 09:02:08 +00:00