openocd/contrib/loaders/flash/cc26xx/cc26x2/cc26x2r1f.lds
Edward Fewell 7b03129916 flash/nor: Add support for TI CC26xx/CC13xx flash
Added cc26xx flash driver to support the TI CC26xx and CC13xx
microcontrollers. Driver is capable of determining which MCU
is connected and configures itself accordingly. Added config
files for four specific variants: CC26x0, CC13x0, CC26x2, and
CC13x2.

Note that the flash loader code is based on the sources used
to support flash in Code Composer Studio and Uniflash from TI.

Removed cc26xx.cfg file made obsolete by this patch.

Change-Id: Ie2b0f74f8af7517a9184704b839677d1c9787862
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4358
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com>
2018-06-15 20:06:25 +01:00

91 lines
2.4 KiB
Plaintext

/******************************************************************************
*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
/* Entry Point */
ENTRY( entry )
/* System memory map */
MEMORY
{
/* Application is stored in and executes from SRAM */
PROGRAM (RWX) : ORIGIN = 0x20000000, LENGTH = 0x1FD8
BUFFERS (RWX) : ORIGIN = 0x20001FD8, LENGTH = 0x6028
}
/* Section allocation in memory */
SECTIONS
{
.text :
{
_text = .;
*(.entry*)
*(.text*)
_etext = .;
} > PROGRAM
.data :
{ _data = .;
*(.rodata*)
*(.data*)
_edata = .;
}
.bss :
{
__bss_start__ = .;
_bss = .;
*(.bss*)
*(COMMON)
_ebss = .;
__bss_end__ = .;
} > PROGRAM
.stack :
{
_stack = .;
*(.stack*)
_estack = .;
} > PROGRAM
.buffers :
{
_buffers = .;
*(.buffers.g_cfg)
*(.buffers.g_buf1)
*(.buffers.g_buf2)
*(.buffers*)
_ebuffers = .;
} > BUFFERS
}