openocd/contrib/loaders/flash/k1921vk01t.S

113 lines
3.3 KiB
ArmAsm

/***************************************************************************
* Copyright (C) 2015 by Bogdan Kolbov *
* kolbov@niiet.ru *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc. *
***************************************************************************/
.text
.syntax unified
.cpu cortex-m4
.thumb
.thumb_func
/* K1921VK01T has 128-bitwidth flash, so it`s able to load 4x32-bit words at the time.
* And only after all words loaded we can start write
*/
/* Registers addresses */
#define FLASH_FMA 0x00 /* Address reg */
#define FLASH_FMD1 0x04 /* Data1 reg */
#define FLASH_FMC 0x08 /* Command reg */
#define FLASH_FCIS 0x0C /* Operation Status reg */
#define FLASH_FCIC 0x14 /* Operation Status Clear reg */
#define FLASH_FMD2 0x50 /* Data2 reg */
#define FLASH_FMD3 0x54 /* Data3 reg */
#define FLASH_FMD4 0x58 /* Data4 reg*/
/* Params:
* r0 - write cmd (in), status (out)
* r1 - count
* r2 - workarea start
* r3 - workarea end
* r4 - target address
* Clobbered:
* r5 - rp
* r6 - wp, tmp
* r7 - flash base
*/
ldr r7, =#0xA001C000 /* Flash reg base*/
wait_fifo:
ldr r6, [r2, #0] /* read wp */
cmp r6, #0 /* abort if wp == 0 */
beq exit
ldr r5, [r2, #4] /* read rp */
cmp r5, r6 /* wait until rp != wp */
beq wait_fifo
load_data:
ldr r6, [r5] /* read data1 */
str r6, [r7, #FLASH_FMD1]
adds r5, #4
ldr r6, [r5] /* read data2 */
str r6, [r7, #FLASH_FMD2]
adds r5, #4
ldr r6, [r5] /* read data3 */
str r6, [r7, #FLASH_FMD3]
adds r5, #4
ldr r6, [r5] /* read data4 */
str r6, [r7, #FLASH_FMD4]
adds r5, #4
start_write:
str r4, [r7, #FLASH_FMA] /* set addr */
adds r4, #16
str r0, [r7, #FLASH_FMC] /* write cmd */
busy:
ldr r6, [r7, #FLASH_FCIS] /* wait until flag set */
cmp r6, #0x0
beq busy
cmp r6, #2 /* check the error bit */
beq error
movs r6, #1 /* clear flags */
str r6, [r7, #FLASH_FCIC]
cmp r5, r3 /* wrap rp at end of buffer */
bcc no_wrap
mov r5, r2
adds r5, #8
no_wrap:
str r5, [r2, #4] /* store rp */
subs r1, r1, #1 /* decrement 16-byte block count */
cmp r1, #0
beq exit /* loop if not done */
b wait_fifo
error:
movs r0, #0
str r0, [r2, #4] /* set rp = 0 on error */
exit:
mov r0, r6 /* return status in r0 */
bkpt #0