47 lines
1.3 KiB
INI
47 lines
1.3 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#
|
|
# Configuration script for ARM Musca-A development board
|
|
#
|
|
# For now we do not support Musca A flash programming using OpenOCD. However, a
|
|
# work area is configured for flash programming speed up.
|
|
#
|
|
# GDB considers all memory as RAM unless target supplies a memory map.
|
|
# OpenOCD will only send memory map if flash banks are configured. Otherwise,
|
|
# configure GDB after connection by issuing following commands:
|
|
# (gdb) mem 0x10200000 0x109FFFFF ro
|
|
# (gdb) mem 0x00200000 0x009FFFFF ro
|
|
# (gdb) set mem inaccessible-by-default off
|
|
|
|
# ARM Musca A board supports both JTAG and SWD transports.
|
|
source [find target/swj-dp.tcl]
|
|
|
|
# set a safe JTAG clock speed, can be overridden
|
|
adapter speed 1000
|
|
|
|
global _CHIPNAME
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME MUSCA_A
|
|
}
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
set _CPUTAPID 0x6ba00477
|
|
}
|
|
|
|
# Enable CPU1 debugging as a separate GDB target
|
|
set _ENABLE_CPU1 1
|
|
|
|
# Musca A1 has 32KB SRAM banks. Override default work-area-size to 8KB per CPU
|
|
set WORKAREASIZE_CPU0 0x2000
|
|
set WORKAREASIZE_CPU1 0x2000
|
|
|
|
# Set SRAM bank 1 to be used for work area. Override here if needed.
|
|
set WORKAREAADDR_CPU0 0x30008000
|
|
set WORKAREAADDR_CPU1 0x3000A000
|
|
|
|
source [find target/arm_corelink_sse200.cfg]
|