openocd/tcl/board/mcb1700.cfg

78 lines
1.9 KiB
INI

# SPDX-License-Identifier: GPL-2.0-or-later
# Keil MCB1700 PCB with 1768
#
# Reset init script sets it to 100MHz
set CCLK 100000
source [find target/lpc17xx.cfg]
global MCB1700_CCLK
set MCB1700_CCLK $CCLK
$_TARGETNAME configure -event reset-start {
# Start *real slow* as we do not know the
# state the boot rom left the clock in
adapter speed 10
}
# Set up 100MHz clock to CPU
$_TARGETNAME configure -event reset-init {
# PLL0CON: Disable PLL
mww 0x400FC080 0x00000000
# PLLFEED
mww 0x400FC08C 0x000000AA
# PLLFEED
mww 0x400FC08C 0x00000055
# CCLK=PLL/4 (=100 MHz)
mww 0x400FC104 0x00000003
# CLKSRCSEL: Clock source = internal RC oscillator
mww 0x400FC10C 0x00000000
# PLL0CFG: M=50,N=1 -> PLL=400 MHz
mww 0x400FC084 0x00000031
# PLLFEED
mww 0x400FC08C 0x000000AA
# PLLFEED
mww 0x400FC08C 0x00000055
# PLL0CON: Enable PLL
mww 0x400FC080 0x00000001
# PLLFEED
mww 0x400FC08C 0x000000AA
# PLLFEED
mww 0x400FC08C 0x00000055
sleep 50
# PLL0CON: Connect PLL
mww 0x400FC080 0x00000003
# PLLFEED
mww 0x400FC08C 0x000000AA
# PLLFEED
mww 0x400FC08C 0x00000055
# Dividing CPU clock by 8 should be pretty conservative
#
#
global MCB1700_CCLK
adapter speed [expr {$MCB1700_CCLK / 8}]
# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
# "User Flash Mode" where interrupt vectors are _not_ remapped,
# and reside in flash instead).
#
# See Table 612. Memory Mapping Control register (MEMMAP - 0x400F C040) bit description
# Bit Symbol Value Description Reset
# value
# 0 MAP Memory map control. 0
# 0 Boot mode. A portion of the Boot ROM is mapped to address 0.
# 1 User mode. The on-chip Flash memory is mapped to address 0.
# 31:1 - Reserved. The value read from a reserved bit is not defined. NA
#
# http://ics.nxp.com/support/documents/microcontrollers/?scope=LPC1768&type=user
mww 0x400FC040 0x01
}