openocd/tcl/target/atsaml1x.cfg

34 lines
723 B
INI

# SPDX-License-Identifier: GPL-2.0-or-later
#
# Microchip (formerly Atmel) SAM L1x target
#
# Note: These devices support SWD only.
#
transport select swd
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME saml1x
}
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x800
}
swd newdap $_CHIPNAME cpu -expected-id 0x0bf11477
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
if {![using_hla]} {
cortex_m reset_config sysresetreq
}